- 0,23kW 18000U/min(2)
- 0-380-03-0497(1)
- 1 MB RAM und PC Cobtroller(1)
- 1-005-15-0020(1)
- 1-005-16-0000 D(1)
- 1-007-34-0001(1)
- 1-026-26-0030(2)
- 1-055-12-0050(2)
- 1-056-11-0400(1)
- 1545/500/H361 mm(1)
- 1555/500/H272 mm(1)
- 1558/295/H280 mm(1)
- 1600/295/H278 mm(1)
- 1715/370/H342 mm(1)
- 1958/295/H276 mm(1)
- 2 Achser HC 010 o.Analogeingang(2)
- 2-083-01-5003(1)
- 2-083-01-5004(1)
- 2-083-01-5101(1)
- 2-083-01-5102/5103(1)
- 2-083-01-5105(1)
- 2-083-01-5201(1)
- 2-083-01-5202(1)
- 2-083-01-5203(1)
- 2-083-01-5403/04(1)
- 2-083-01-5404(1)
- 2-083-01-5405(1)
- 2-083-01-5406(1)
- 2-083-01-5406/07(1)
- 2-083-01-5408(1)
- 2-083-01-5800(1)
- 2-083-01-5903(1)
- 2-083-01-5905(1)
- 2-083-01-6303(1)
- 2-083-01-6902(1)
- 2-083-01-8100(1)
- 2-083-02-7006(1)
- 2-083-02-7013(1)
- 2-083-02-7022(1)
- 2-083-02-7106(1)
- 2-083-02-7420(1)
- 2-083-02-7921(1)
- 2-083-02-8075(1)
- 20/30/12/G(1)
- 20/50/16/V/G(1)
- 2004 neugewickelt(1)
- 2083015407(1)
- 2083027407(1)
- 211 Venture 22 L(1)
- 3,5 HD 52 MB(1)
- 310/9/A20/S2(1)
- 3240/295/H280 mm(1)
- 3575/295/H275 mm(1)
- 3818(1)
- 4 Motoriges Kopieren(1)
- 4,4kW 2860U/min(1)
- 4-00570(1)
- 4-008-39-0001(1)
- 4-008-39-0002(1)
- 4-008-40-0144(1)
- 4-02078(1)
- 4-060-24-0165(1)
- 4-075/02/0036(1)
- 4-075/02/0038(2)
- 4-086-05-0113(1)
- 4-086-05-0262(1)
- 480/1210/H290 mm(1)
- 5 Fach(1)
- 8 Fach Wechsler(1)
- 83.51(1)
- 83.56(1)
- 83.65(1)
- Anschlag System(1)
- auf KF Homag(1)
- aus KFL 10(1)
- Ausgangskarte(1)
- Ausgangskarte 16x220V(1)
- Bandbreite mm(1)
- BARGSTEDT TBH22/D/25/12(1)
- BAZ 20 - 50 -12(1)
- BAZ 20/50/16/V/KA(1)
- BAZ 41/K OPTIMAT (1)(1)
- BAZ20/50/16/K(1)
- BHX 050(1)
- BHX 200/D(1)
- BMG 512(1)
- BOF / BAZ20/50/18/2/D(1)
- BOF 311 Venture 15L(1)
- BOF 311/40/21/r WORKING CENTER(1)
- BOF 32/30/K(1)
- BOF 41/K Optimat(1)
- BUS 3-15/30-30-004(1)
- CH 03 32 32 PLUS(1)
- CPU HC020 SPS II(1)
- CPU Karte(1)
- CPU PC Controlleinheit(1)
- CPU Umlade-RAM 512 I/O(1)
- DA-10-2(1)
- Diskettenlaufwerk und Festplatte(1)
- Drehgeber für Strecke(1)
- Drilltec V-200 Optimat BHX055(1)
- DRILLTEQ V500(2)
- Druckzonenrevolver(1)
- EDGETEQ S-500 KAL370 Ambition(1)
- Ein und Ausgangskarte(1)
- Ein und Ausgangskarten Streckensteuerung(1)
- Eingabeeinheit mit LCD Anzeige und Tastatur(1)
- Eingangskarte(1)
- Eingangskarte 32x24V(1)
- F5(1)
- FKR 78/C/A/S3(1)
- FL 20/05/25 - TD 31/30/13 - FL 64/30/II+1000(1)
- FL 20/06/30/S(1)
- FL 20/07/15/S(1)
- FL 62/25(1)
- Flex 5(1)
- Formfräsen / contour milling(1)
- Formsttrecke(1)
- FPL620/06/15/P S/LQ(1)
- FS 11/FS 10(1)
- Genius 20/50/14/G(1)
- Genius 20/50/16/V/G(1)
- GENIUS BAZ 20/30/14/3/D(2)(1)
- Größe 10930/500/H262 mm(1)
- Größe 11370/498/H240 mm(1)
- Größe 2525/498/H268 mm(1)
- Größe 2925/494/H447 mm(1)
- Größe 4050/498/H268 mm(1)
- Größe 7550/460/H196 mm(1)
- Größe 9090/460/H350 mm(1)
- HD SCSI 10TE CPU 30(1)
- Herstellung Türrohlinge(1)
- Hmag-2/mit ACR 1 Ausgang(1)
- HO0028895(1)
- Homatic(8)
- Homatic Achskarte(1)
- Homatic Steuerung Ausgangskarte(1)
- Homatic Streckenprozzesorkarte(1)
- Homatic Streckenprozzessor(1)
- Hubschwingen für schwere Teile(1)
- JOKER BAZ 41(1)
- K 11/13(1)
- KAL 210 AMBITION 2264(1)
- KAL 210/7/A20/S2(1)
- KAL 211 Ambition 2274(1)
- KAL 310(2)
- KAL 310 310/6/A3/S2(1)
- KAL 310/7/A20/S3(1)
- KAL 310/7/A3/S2(1)
- KAL 310/8/A20/S2(1)
- KAL 310/9/A20/S2(2)
- KAL 330/6/A3/S2(1)
- KAL210 AMBITION 2264(2)
- KAL210 AMBITION 2264 - ZHR 05/L/085(1)
- KAL211 EDITION 2264(1)
- KAL310/8/A20/S2(1)
- KAL330(1)
- Karte Seco 6 X RS 232(1)
- KF 20/13/QA/10 + KF 20/15/25/QA(1)
- KF 20/20/QA/15(1)
- Kf 62(1)
- KF66/17/6A/10(1)
- KFL 10/42/QE/S(1)
- KFL 54/KFL 53(1)
- KFR 21 und KFL 21 inkl.Winkelübergabe(1)
- KFR20/16/QA/15-TWR24/30/12/S-KFR20/19/QA/25(1)
- KL 10/18/QA(1)
- KL 10/21/QA(1)
- KL 76/A20(1)
- KL 78/A20/S2(2)
- KL 79(1)
- KL 79/2/A20/S2(1)
- KL77/A20(1)
- KLO 76(1)
- Konvertierungskarte CPU/30/E16 4 x RS(1)
- LF-40-C-KA(1)
- LF-40CKA(1)
- LF-55 CKA(1)
- LF-55-C-KA(1)
- LF-55-C-ST(1)
- LF-55-L(2)
- LF-55-L-KA(3)
- LF-55CST(2)
- LF-64-C(2)
- LF-64-L(1)
- LF-64L(1)
- MAC93C-0-FS/4HC/110-A-0(1)
- mit 2 Perske Motor(2)
- mit 2x Perske Motoren(2)
- mit 3 Perske Motor(1)
- mit Fügefräsaggregat(2)
- mit Gummiprofil(1)
- mit langer Welle(4)
- mit Oszillation(4)
- mit Perske Motor(8)
- mit Perske Motoren(14)
- mit Polierbürste(1)
- Mouldteq M-300 Fenster(1)
- Nachputzeinrichtung Leimfuge(1)
- NC 20(1)
- NFL 26/6/10/PW/L(1)
- Optimat BAZ 232/40/K(1)
- OPTIMAT BAZ 31/60/K(1)
- Optimat BAZ 311/40/K(1)
- Optimat BAZ 311/52/K(1)
- OPTIMAT BAZ 311/60/K(1)
- Optimat BOF / 40 / G(1)
- Optimat BOF 211/52/K(1)
- OPTIMAT BOF 211/VENTURE 12L(1)
- Optimat BOF 311/60/K(1)
- OPTIMAT BOF 612/34/13/2 K(1)
- OPTIMAT JOKER BAZ 41(1)
- OPTIMAT KAL 310/6/A3/S2(1)
- Optimat KAL 310/9/A20/S2(1)
- Optimat KL 78/A20/S2(1)
- OPTIMAT LPP306(1)
- P KF 20/24/QA/30(1)
- PC Steuerung Ausgangskarte(2)
- PN10(1)
- Pneumatische Mittenunterstüzung(1)
- Power FL 14/10/12/CF(1)
- Power FR 20/09/15/L/Q1(1)
- Profi BAZ/20/40/14/3/KA(1)
- PS10(1)
- PSE 4225 DP-M(1)
- Putzaggregat / buffing unit(1)
- Q 34(2)
- Quickmelt(1)
- R2 Radius HSK63(1)
- Rechnerkarte(1)
- Ritzmotor FPL 526(1)
- Ritzsäge Nachschwenkeibrichtung für lin(1)
- Rollendruckzone(1)
- Rollenlänge 120 mm(1)
- Schlosskastenaggregat(1)
- Schnellwechselköpfe FK 11 / FK 13(1)
- Schwabbelaggregat / Buffing unit(1)
- Schwabbelaggregate(1)
- ser 8808 B(1)
- SEW(1)
- SPS II 12 MHz 1MB RAM(1)
- Streckenprozessor(1)
- Streckenprozessor 4 Achser(1)
- SV.5.430/2(1)
- TD 12 / 25(1)
- Teile von KF Maschine(1)
- Transportband(1)
- UPTIMAT BAZ 32/50/G(1)
- verstellbar(3)
- Verstellweg 100 mm(1)
- VFL 75(1)
- VFL 79/02(1)
- VFR10/22(1)
- xxx(1)
Modelo
(Fabricante: HOMAG)
Año de construcción: 1998
usado
15.000 € Description: Type of edging Thin edge Thick edge Gluing System PUR Combination Squaring Edgebanding Machine First Pass Max Panel Width 3000 mm Max feed speed 40 m/min Operating Units Right Side 10 nr Operating Units Left Side 10 nr Min. panel height 8 mm Max. panel height 60 mm Min. panel width 240 mm Max. panel width 3000 mm Min. edge thickness 0.4 mm Max. edge thickness 3.5 mm Max. forward feed speed 40 m/min Top pressure yes Pressure with rubber belt Panel support guides yes No. Panel Sizing / Milling units Left Side 1 NO. PANEL SIZING / MILLING UNITS LEFT SIDE 1 Unit : double chipper, top and bottom Constructor model : KD 11 motor power : 4.5 KW r.p.m. : 6000 RPM Same technical characteristics on the left side yes Edge coil magazine yes no. positions 12 Gluing system yes glue pot for PUR glue yes premelter for PUR glue yes Roller set to press the edge yes No. Edge Processing Units 8 ...
Año de construcción: 2005
usado
6.500 € Description: Control voltage on: 35'849 h Main spindle BE1: 23749 h Boring head BE1: 3709 h Drill head: 17 spindles Main spindle: 18.5 kW controlled Chain changer 30-fold HSK F63 Speed range 0-18'000 rpm Drilling head 35 spindles vertical, for automatic changing into the main spindle Control system was converted in 2014: RECHNER IPC 5.11.0.0 WITH DVD, Industrial PC IPC 5.11 from Eltec with Windows XP operating system, hardware: Industrial PC Intel Core 2 Duo E8400 3.0 GHZ, working memory 4 GB RAM, 2 COM interfaces RS232, internal DVD-ROM drive, 1 fixed hard disk with 250 GB, 1 USB hard disk for data backup, 4 USB ports, Ethernet network connection with EC Declaration of Conformity Series no. 0-201-19-1527 without tools or units and without vacuum pump ( central vacuum system ) Translated with DeepL.com (free version) working width y-axis: 1,600 mm, working height z-axis: 950 mm, work ...
Año de construcción: 2006
usado
12.500 € Description: Powerful CNC machining centre equipped with: 2 pcs. main spindles, each with C-axis one of them with Flex-5 interface, 2 x 11 kW - HSK 63 drilling unit with 25 drilling spindles and groove saw 0/90° 2 pcs. 10-fold tool changers 2 console-tables for pedular processing and 4-fold processing max length of workpiece 3740 mm, while pedular processing 1830 mm, while 4-fold processing 700 mm max width of workpiece 1600 mm for processing with milling tool diameter of 25 mm, 1300 mm for all aggregates stop pin for workpieces with overhang of top layer LED positioning system vacuum loader Homag TBP 370 Traverse length approx. 13 metres Installation height from floor 1300 mm with 8 vacuum cups (130 mm and 100 mm diameter) new vacuum pumps in 2023 for further technical details please have a look at the pdf file (German language) working width y-axis: 1,600 mm, working l ...
usado
90 € Description: max. 12000 rpm Teilenummer 1-017-95-1741 without further accessories Approx. Onsite Dimension. (l x w x h): 150 x 150 x 250 mm, weight approx.: 10 kg
Año de construcción: 2010
usado
Description: With Homag workpiece feeder TBL 100/25/12/F and Ligmatech workpiece return unit ZHR 30L/155/F , edge thickness: 3 mm, workpiece thickness: 12 -60 mm, feed: 18 m/min, gluing unit: Ja, snipping unit: Ja, rough trimming unit: Ja, fine trimming unit: Ja, profile trimming unit: Ja, universal milling unit: Ja, edge sanding unit: Ja, flat scraping unit: Ja, profile scraping unit: Ja, edge buffing unit: Ja, control: powerControl NC 21, return system: Ja, total power approx: 40 kW, Approx. Onsite Dimension. (l x w x h): 10,000 x 6,000 x 1,700 mm, weight approx.: 4,000 kg
Año de construcción: 2003
usado
4.900 € Description: Technical data: tape thickness: 0.3 - 3 mm material thickness: 8 - 60 mm conveyor speed: 18 - 25 m / min The edgebander consists of the following aggregates: • 2 pre-milling machines for material processing (3 kW each) • material heating lamp • glue heating vessel • container with roller for applying glue to the material • push rollers • 2 stripping units (each 0.8kw) • 2 units with radial cutters for processing the upper and lower edges (1.5 kw each) • 2 postforming aggregates • 2 cyclings • polishing brushes with liquid injectors The edging is fully automated, which means that the height of the beam, pre-milling machines, rollers and all the settings of the cutter depending on the thickness of the material and the strip are adjusted on the main monitor. serial number: 0-200-19-0792, edge thickness: 0.3 - 3 mm, workpiece thickness: 8 - ...
Año de construcción: 1996
usado
Description: HOMAG KL 76/A20 Edge Bander (incomplete) Approx. Onsite Dimension. (l x w x h): 8,400 x 1,060 x 2,100 mm, weight approx.: 4,500 kg
Año de construcción: 2009
usado
Description: - Workpiece length , All units max. approx. 5200 mm , Milling cutter 25 mm max. approx. 5375 mm - Workpiece width , Rear stop for all units max. approx. 1400 mm , Rear stop cutter 25 mm max. approx. 1550 mm , Front stop for all units max. approx. 1150 mm , Front stop milling cutter 25 mm max. approx. 1220 mm - Main spindle 18.5 KW with C-axis , Speed 0 - 24000 rpm - 72-speed chain changer - Milling spindle 6 KW - LED console position indicator - Chip conveyor belt and articulated belt conveyor (Further tools and units for the tool changer are not included within delivery. Availability depends on the delivery of the new machine. A transport rack from HOMAG is required for transportation of the dismantled machine. This results in costs of EUR 6,500,-- (plus tax). After the transport rack has been returned to Helmut Meier (Germany Burgthann), ...
Año de construcción: 2005
usado
Description: ATTENTION: Location 35614 Aßlar, Germany Well-maintained HOMAG Optimat BAZ 311/52/K CNC machining center with HOMAG Optimat TBA 330/20/16 vacuum feeder, main spindle with Flex5 interface and web edge press unit. ,The main spindle was replaced at the beginning of March 2024 and the costs were EUR 19,000! HOMAG Optimat BAZ 311/52/K, machine no. 0-201-21-4391 HOMAG Optimat TBA 330/20/16, machine no. 0-205-21-4383 Workpiece length: - Single occupancy with tool diameter. 25mm max. 5200mm - Pendulum assignment with tool diameter. 25 mm max. 2150 mm with pendulum occupancy Workpiece width front stop: - max. 1525 mm with tool diameter 25mm - max. 1525 mm with web edge pressing unit - max. 1450 mm for all units Workpiece width stop at the back: - max. 1730 mm with tool diameter 25mm - max. 1650 mm with web edge press unit - max. 1600 mm for all units Main spindle: ...
Año de construcción: 2008
usado
Description: ATTENTION: Location 97944 Boxberg- Windischbuch, Germany Very well maintained HOMAG Optimat BOF 311/60/K CNC processing center. Technical data: Workpiece length all aggregates - single loading max. 6.000 mm and pendulum loading max. 2.375 mm Workpiece length tool diameter with 25 mm - Single occupancy max. 6,175 mm and pendulum occupancy max. 2,550 mm Workpiece width all units - Front max. 1,450 mm and rear max. 1,700 mm Workpiece width tool diameter with 25 mm - Front max. 1,525 mm and rear max. 1,850 mm Workpiece thickness - Max. 300 mm incl. clamping device Clamping table Console with LED display in X and Y direction - Console length 1640 mm Main spindle 15 KW and speed 1.000 - 24.000 rpm - C-axis with interface for FLEX-5 (aggregate not included!) Drilling head MPU horizontal and vertikal S360° - MultiProcessingUnit with C-axis +/- 185° for drilling operations ...
usado
Edge closure for edge banders, edge banding machines -Manufacturer: Homag -for: 2x different edges -Number: 1x edge closure available -Price: per piece -Dimensions: 670/360/H350 mm -Weight: 43 kg/piece
usado
Control card, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 2-083-01-5406/07 -Type: 2083015406/07 -Number: 1x control cards available -Price: per piece -Dimensions: 20/190/H260 mm -Weight: 0.31 kg
usado
Finishing unit, buffing unit, modular unit kit, format processing unit, double-end profiler, edge processing machine, after the scraper for edge processing machine -without: drive motors -HOMAG finishing unit: for cleaning agent application with buffing device for disposal of glue residue on PVC edges -with: oscillation -Swiveling -Number: 3x units available -Price: per piece -Dimensions: 400/160/H225 mm -Weight: 5.7 kg
usado
Control card, input card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 2-083-01-5102/5103 -Type: 2083015102/5103 -Number: 1x control cards available -Price: per piece -Dimensions: 20/190/H260 mm -Weight: 0.275 kg
usado
Control card, input card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 83.51 -Type: 83 51 -Number: 1x control cards available -Price: per piece -Dimensions: 20/190/H260 mm -Weight: 0.275 kg
usado
PC-CPU, control card, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: PC-CPU-2-083-01-5003 -Type: PC-CPU 2083015003 -Number: 1x control cards available -Price: per piece -Dimensions: 20/195/H265 mm -Weight: 0.31 kg
usado
Control card, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 2-083-01-5905 -Type: 2083015905 -Number: 1x control cards available -Price: per piece -Dimensions: 130/365/H30 mm -Weight: 0.58 kg
usado
Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit can be rebated, grooved and profiled -with keying: from 2 sides each -Milling unit: swiveling -2x engines Perske -Power: 0.3 kW -Voltage: volts -Frequency: Hz -Speed: 18000 rpm -Other engines with other services in stock for an additional charge -Dimensions: 520/470/H600 mm -Weight: 64 kg
usado
Linear drive, linear gear, screw jack, spindle drive -comes from a Homag edge banding machine -difficult execution -Adjustment path: 100 mm -Number: 2 pieces available -Price: complete for 2 pieces -Dimensions: 250/230/H800 mm/piece -Weight: 66 kg/piece
usado
Clamping plate, unit carrier, milled surface, welding table, welding table -Width of the table surface: 498 mm -Length of the clamping surface: 2525 mm -Height of table surface: 268 mm -Working height: 268 mm -Transport dimensions: 2525/500/H268 mm -Weight: 570 kg
usado
Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit: for format processing -with heavy dovetail guide -1x motor Perske -with long shaft -Motor type: KNS 70.12/2 D1 -Power: 3.0/4.4 kW -Voltage: 220/380 volts -Frequency: 50/100 Hz -Speed: 2870/5880 rpm -1x motor Perske -with long shaft -Motor type: KNS 70.14/4D1 -Power: 3.7/6.0 kW -Voltage: 220/380 volts -Frequency: 50/100 Hz -Speed: 2850/5860 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1100/1300/H1400 mm -Weight: 550 kg
usado
Clamping plate, unit carrier, milled surface, welding table, welding table -Width of the table surface: 494 mm -Length of the clamping surface: 2925 mm -Height of table surface: 447 mm -Working height: 447 mm -Transport dimensions: 2925/494/H447 mm -Weight: 564 kg
usado
Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit: for format processing -with heavy dovetail guide -1x engines Perske -Motor type: KNS 70.12/2.DF1 KNS 51.15.20 -Power: 3/4.4 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -2x engines Perske -Motor type: KNS 51.15/2D -Power: 1.1/2.2 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2640/5600 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1150/1100/H1200 mm -Weight: 625 kg
usado
Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit: for joint milling -with heavy dovetail guide -Milling unit: swiveling -1x engines Perske -Motor type: KNS 70.12/2.01 -Power: 3/4.4 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1100/600/H1200 mm -Weight: 300 kg
usado
Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit: for format processing -with heavy dovetail guide -1x engines Perske -with long shaft -Motor type: KNS 70.12-2DF -Power: 5.5/8.0 kW -Voltage: 220/380 volts -Frequency: 50/100 Hz Speed: 2870/5880 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1250/1350/H600 mm -Weight: 400 kg
usado
Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit: for format processing -with heavy dovetail guide -1x engines Perske -Motor type: KNS 70.12/2.DF1 -Power: 3/4.4 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -2x engines Perske -Motor type: KNS 51.15/2D -Power: 1.1/2.2 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2640/5600 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1200/1000/H1200 mm -Weight: 600 kg
usado
Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit: for joint milling -with heavy dovetail guide -Milling unit: swiveling -1x engines Perske -Motor type: KNS 70.12/2.01 -Power: 3/4.4 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1150/600/H1250 mm -Weight: 280 kg
usado
Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit: for format processing -with heavy dovetail guide -1x engines Perske -Motor type: KNS 70.12-2DF -Power: 3/4.4 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1100/600/H1000 mm -Weight: 300 kg
usado
Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit: you can rebate, groove and profile -with keying: from 2 sides each -Milling unit: swiveling -1x engines Perske -Power kW -Voltage: volts -Frequency: Hz -Speed: rpm -Other engines with other services in stock for an additional charge -Dimensions: 650/520/H600 mm -Weight: 80 kg
usado
Multiplexer, control card, input card, control, edge banding machine, edge banding machine -Manufacturer: Homag Homatic -Type: 2-083-02-7921 -Type: 2083027921 -Number: 2x control cards available -Price: per piece -Dimensions: 130/340/H30 mm -Weight: 0.28 kg
usado
Unit carrier, clamping plate traversing table, for unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG unit carrier for milling units -with heavy leadership -laterally movable -with counter -Table height: 361 mm -Table surface: 1545 x 300 mm -Table thickness: 20 mm -Dimensions: 1545/500/H361 mm -Weight: 222 kg
usado
Unit carrier, clamping plate traversing table, for unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG unit carrier for milling units -with heavy leadership -laterally movable -with counter -Table height: 280 mm -Table surface: 1558 x 295 mm -Table thickness: 20 mm -Dimensions: 1558/295/H280 mm -Weight: 166 kg
usado
Unit carrier, clamping plate traversing table, for unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG unit carrier for milling units -with heavy leadership -laterally movable -with counter -Table height: 278 mm -Table surface: 1600 x 295 mm -Table thickness: 18 mm -Price: per piece -Number: 2x available -Dimensions: 1600/295/H278 mm -Weight: 170 kg
usado
Unit carrier, clamping plate traversing table, for unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG unit carrier for milling units -with heavy leadership -laterally movable -with counter -Table height: 276 mm -Table surface: 1958 x 295 mm -Table thickness: 18 mm -Price: per piece -Number: 2x available -Dimensions: 1958/295/H276 mm -Weight: 208 kg
usado
Unit carrier, clamping plate traversing table, for unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG unit carrier for milling units -with heavy leadership -laterally movable -with counter -Table height: 280 mm -Table surface: 3240 x 295 mm -Table thickness: 20 mm -Price: per piece -Number: 2x available -Dimensions: 3240/295/H280 mm -Weight: 330 kg
usado
Clamping plate, unit carrier, milled surface, welding table, welding table -Clamping surface width: 460 mm -Length of clamping surface: 7550 mm -Height of table top: 196 mm -Working height: 196 mm -Transport dimensions: 7550/490/H196 mm -Weight: 1726 kg
usado
Unit carrier, clamping plate traversing table, for unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG unit carrier for milling units -with heavy leadership -laterally movable -with counter -Table height: 275 mm -Table surface: 3575 x 295 mm -Table thickness: 20 mm -Price: per piece -Number: 2x available -Dimensions: 3575/295/H275 mm -Weight: 356 kg
usado
Clamping plate, unit carrier, milled surface, welding table, welding table -Width of the table surface: 498 mm -Length of the clamping surface: 4050 mm -Height of table surface: 268 mm -Working height: 268 mm -Price: per piece -Number: 2x available -Transport dimensions: 4050/520/H268 mm -Weight: 764 kg / 828 kg
usado
Clamping plate, unit carrier, milled surface, welding table, welding table -Clamping surface width: 500 mm -Length of the table surface: 10930 mm -Height of table surface: 262 mm -Working height: 262 mm -Price: per piece -Number: 1x available -Transport dimensions: 11370/510/H240 mm -Weight: 2020 kg
usado
Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 0.6 kW 18000 rpm at 300 Hz -Shaft holder: Ø 16 mm L 10 mm -Number: 2x motors available -Price: per piece -Weight: 3.3 kg
usado
Clamping plate, unit carrier, milled surface, welding table, welding table -Width of the table surface: 498 mm -Length of the table surface: 11370 mm -Height of table surface: 236 mm -Working height: 236 mm -Price: per piece -Number: 1x available -Transport dimensions: 11370/510/H240 mm -Weight: 2200 kg
usado
Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 0.23 kW 18000 rpm at 300 Hz -Weight: 2 kg
usado
Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 0.23 kW 18000 rpm at 300 Hz -Shaft holder: Ø 15 mm L 25 mm -Number: 5x motors available -Price per piece -Dimensions: 200/70/H90 mm -Weight: 2 kg
usado
Clamping plate, unit carrier, milled surface, welding table, welding table -Clamping surface width: 460 mm -Length of clamping surface: 9090 mm -Table height: 206 mm -Working height: 350 mm -Transport dimensions: 9090/490/H350 mm -Weight: 2300 kg
usado
Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz -Shaft holder: Ø 20 mm L 25 mm -Weight: 3 kg
usado
Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 1.125 kW 18000 rpm at 200 Hz -Voltage: 165 volts -Take shaft: Ø 15 mm -Dimensions: 320/75/H160 mm -Weight: 6 kg
usado
Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG trimming unit for trimming the protruding edges on the front and rear edges -with heavy leadership -Milling unit: swiveling -2x motors -Motor type: -Power: 0.23 kW -Voltage: volts -Frequency: Hz -Speed: 18,000 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1000/420/H655 mm -Weight: 140 kg
usado
Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor, electric motor -Power: 1.5 kW 12000 rpm at 200 Hz -Holding shaft: Ø 16 mm -Dimensions: 380/75/H160 mm -Weight: 8kg
usado
Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 1.125 kW 18000 rpm at 300 Hz -Voltage: 165 volts -Take shaft: Ø 15 mm -Dimensions: 320/75/H160 mm -Weight: 6 kg
usado
Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -The four-motor HOMAG profile milling units ensure corner rounding even when processing veneer -for rounding edges on the workpiece front and rear edge above and below -4x engines Perske -Power: 1.5 kW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18000 rpm -Weight: 374 kg
