Modelo
(Fabricante: HOMAG)
Fabricante: Homag, Recambio de la máquina: Homag Kf, para el lado izquierdo de la máquina: enlaces, Número de motores: 1, Motor: Perske, kW-Leistung: 4,4, Voltio/Hz: 100, Drehzahlen U/min: 5860, Controlado neumáticamente: sí, Dimensiones del eje L x D mm: 30, Estirable horizontalmente: sí, neumatisch gesteuert : sí,
Fabricante: Homag, Tipo: Potencia FL 14/10/12/CF, Año: 2004, Control: sí, Número de husillos de fresado: 4, Espacio requerido L x W x H mm: 8400x4750, Año : 2004
Fabricante: Homag, Tipo: Konvertierungskarte CPU/30/E16 4 x RS, Número de serie: 4-086-05-0241, Año: 19.10.1994 K.kraft, Año : 19.10.1994 K.kraft
Productor: Homag VME Interfacekarte, Tipo: Homatic, Número de serie: 2-083-01-5423, Configuración del sistema: 2-083-01-5093, Número de serie: f.HC010 Rev.4,
Fabricante: Homag Nutsäge mit Winkelgetriebe, Tipo: 4-00570, Hoja de sierra cantidad: 1, Diámetro de la herramienta mm: ca.160, Usado: sí, Anschlussspindel mm: HSk 63, Disponible: sofort, TEXTO LIBRE: HSK 63 ,
Fabricante: Homag, Tipo: F5, Modelo: 15.F5. CBE-YA00, Número de serie: 4-008-39-1121 V3.2,
Fabricante: Homag Doppelzerspaner mit Schutzfräsen, Recambio de la máquina: Homag, para el lado izquierdo de la máquina: sí, Número de motores: 3, Motor: Perske, kW-Leistung : 3/4,4, Voltio/Hz : 50/100, Drehzahlen U/min : 2880/5860, Siko Anzeige : sí, Controlado neumáticamente: sí/mit Revólver, Slewable horizontal 3: sí, TEXTO LIBRE: Nur Ständer ohne Motore,
El productor: Homag CPU SPS-II, Tipo: Homatic, Modelo: PC-Controller, Número de serie: 2-083-01-5053,
El productor: ELTEC Homag IPC-2, Tipo: Homatic, Modelo: Netzwerkkarte, Número de serie: 2-083-03-0099, Configuración del sistema: IPCA-200/1, Número de serie: Traegerkarte,
Manufacturer: Homag mit Verleimteil, Type: Optimat BOF / 40 / G , Year: 2000, Control: WoodWOP, Programmierplatz Büro: yes, Work piece width min-max mm: 1050/1200, Min.-max. workpiece length in mm: 4800, Min.-max. workpiece height in mm: 60/200, C axis: yes, Tool adaption system: HSK F63, Milling engine 1 hours power: 12, rpm 1): 1500 - 18000, Number of tool changers: 1, Number of tools per tool-magazine: 12, Mitfahrender Werkzeugwechsler: yes, Vertical drills-X: 11, Drill vertical Y: 7, Horizontal drills-X: 4, Aluminium sleeking table: yes, 2 station allocation: 2, Stops in the table front: 6 , Vacuum pumps m³/h: 120, Saw unit: yes, Edgebanding unit: no, Marking laser: Laserpositionerhilfe, Radial arm machine: yes, Foot mats: yes, Available: ca. 03/2017, Year :2000
El productor: Eltec Homag, Tipo: Homatic, Modelo: Seco 6xRS232 VME Bus IRQ2, Número de serie: 2-083-03-0202,
El productor: Homag CPU , Tipo: SPS II 12 MHz 1MB RAM, Número de serie: 2-083-01-5044,
El productor: Homag CPU SPS-II, Tipo: 1 MB ram und PC Cobtroller, Número de serie: 2-083-01-5043, Año: 93, Año :93
El productor: Homag CPU, Tipo: CPU HC020 SPS II, Número de serie: 2-083-01-50-60, Systemconfiguration: V:4.66a,
Fabricante: Homag, Tipo: Homatic, Modelo: Eingangskarte 3224 Voltios, Número de serie: 2-083-01-5105, Año: 93, Año :93
El productor: Homag, Tipo: Homatic Streckenprozzessor , Número de serie: 2-083-02-7024,
El productor: Umrichter Homag KEB, Modelo: für Weeke Frässpindel, Número de serie: 97410930-0316782, mH/Hz: 16000, Salida PpK= kW: 11 kw, Usado: sí,
Fabricante: Homag Ausgangskarte 24 Voltios, Tipo: Homatic, Modelo: Ausgangskarte 16 24 Voltios, Número de serie: 2-083-01-5408,
Fabricante: Homag CPU SPS CPU, Tipo: Homatic, Número de serie: 2-083-01-5057, Configuración del sistema: 2-083-01-5020 REV02, Año: 11/94, Año: 11/94
Fabricante: Homag Ziehklingenaggregat, Ausführung rechts: yes, Radiusziehklinge: yes, Steuerbar: no, Tracing by roller: yes, Wechselstähle: yes, Wendemesser: yes, Radien 2/3 mm: yes, Automatischer Radienwechsel: no, Ständeraufbau: yes, Kettenbahn/Oberdruck: yes,
Fabricante: Homag, Tipo: Optimat BAZ 311/40/K, Año: 2007, Software: PC85 CNC CORE Z, Velocidad de alimentación máxima m/min: X,Y-80, Z-30, Rango de trabajo X: 4000, Rango de trabajo Y-axis: 1220, Rango de trabajo Z: 12-300, Año : 2007
Fabricante: Homag Ziehklingenaggregat, Ausführung rechts: yes, Radiusziehklinge: yes, Steuerbar: no, Tracing by roller: yes, Wechselstähle: yes, Wendemesser: yes, Radien 2/3 mm: yes, Automatischer Radienwechsel: no, Ständeraufbau: yes, Kettenbahn/Oberdruck: yes,
Manufacturer: Homag, Type: KL 10/21/QA, Year: 1999, Program: Homatic, Control: PC 21, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 50, Min.-max. workpiece length in mm: 150-3500, Min.-max. workpiece height in mm: 10-60, Edgeband height max mm: 65, Min-max feed m/min: 10-30, Axis control: yes, Infeed table: no, Einlauflineal gesteuert: yes, Premilling: yes, Application of separation agent: yes, IR zone: yes, Strip magazin: no, Mitre stations: yes, Pre-milling: yes, Radius milling axis adjustment: yes, Corner tracing type: FK 13, 2 Motoren: 2, Magazin : 2 X 12, with tool holders: HSK, Grooves, slewable-controlled: Freiplatz, Radius scraper: yes, Scraper with axis adjustment: yes, Flat scraper: yes, Corner trace buffing: no, Corner trace buffing: no, Bonding part EVA: 2 Stück, Number of tools per tool-magazine: 2 X 8, Buffing unit: yes, Roller/belt: Riemen, Freiplätze: ...
Fabricante: Homag Anschlaglineal gesteuert, Tipo: aus KFL 10, FREITEXT1: Pneumatisch gesteuert, FREITEXT2: 8 fach Revolver, FREITEXT3: 10 mm Schiene, FREITEXT4: mit Befestigung Kettenbahn,
Fabricante: Homag Ständer ohne Anbauaggregate , Recambio de la máquina: Homag ,
Manufacturer: Homag BAZ , Type: 211 Venture 22 L, Year: 2006, Control: Woodwop/Powercontrol PC 85, Software: Softwarepaket AV, Work piece width min-max mm: 4400 X 1550, Feeding speed max m/min: X= 80/Y=80/Z=30, C axis: yes/Schnittstelle Flex 5, Pendulum processing: yes, Work piece width min-max mm: 4400 X 1550, Number of milling spindles: 1, Number of milling spindles vertical: 1, Tool adaption system: HSK 63 F, Milling engine 1 hours power: 12, rpm 1): 1500-24000, Number of tool changers: 1, Tellerwechseler: 1, Pickup Wechlser: Verleimteil/Easy Edge, Number of tools per tool-magazine: 18, Vertical drills-X: 11, Drill vertical Y: 7, Horizontal drills-X: 1, Drill horizontal Y: 2, Traverse table: 8 Traversen, 2 station allocation: yes, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 250, Saw unit: yes, Edgebanding unit: yes, Edgeband hight mm: 60, LED-R ...
Manufacturer: Homag, Type: KAL 310/7/A20/S3 , Year: 2011, Control: PC 22, Software: Windows XP/Woodscout, Barcode: möglich, Min-max edge material mm: 0,3-3,0, Work piece width min-max mm: 12-60, Min.-max. workpiece height in mm: 12-60, Min-max feed m/min: 18, Axis control: einlauflineal, Infeed table: Servo, Servo Einschubtisch: yes, mit Vakuum: 2 X 3 kw, Profile milling: yes, Machining cracks: yes, Power per lamp: 2-fach, Laser technology: yes, kW Leistung Laser: yes, Coil magazine: HL 84, Strip magazin: 2 X 1,5, Bevel milling: FK 8-fach Wechsler, radius milling: FK 13/Achsverstellung, Vertical grooves: Multiziehklinge MN 21 3 Profile, Grooves, slewable-controlled: PN 10, Nuten : yes, Radius scraper: yes, Servo copying: yes, Spraying system 2: A 20, Ersatzverleimteil : 5 kg, Number of sanding units: yes, Profile sanding top bottom: Einlauf und Auslauf, Barcode: möglich, Workpiece supp ...
Fabricante: Perske Umrichter, Año: 1996, Tipo: 2004 neugewickelt, Año :1996
Manufacturer: Homag, Type: KFR 21 und KFL 21 inkl.Winkelübergabe, Year: 1999, Control: 2 X NC 21, Program: Homatic, System comprising of: 2 Kantenmaschine mit Winklelübergabe, Kantenmaschine mit Doppelenprofiler Teil: 2 Zerspaner + Fügen, getrennte Kette: yes, Laserverleimteil: no, Kantenstärke min-max mm: 0,5-3, Work piece width min-max mm: 45, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-45, Strips min/max mm: no, Machine no 1: KFR 21, MA 1 Arbeitsbreite min-max: 250-2800 mm, MA 1 Kantenmaterialstärke min-max mm: 0,5-3,0, Ma 1 Fügefräsen: yes, Ma 1 Schutzfräsen: yes, MA 1 Feinfräsen: yes, MA 1 Nuten: yes, MA 1 Verleimteil gerade: yes, MA 1 Vorfräsen: yes, MA 1 Radiusfräsen 1: yes, MA 1 Radiusziehklinge: yes, MA 1 Flachziehklinge: yes, MA 1 Schwabbeln: yes, MA 1 Nuten: yes, Angular transfer: yes, Machine 2: KFL, MA 2 Kantenstärke 0,5-3 mm: yes, ...
Manufacturer: Homag PU und EVA, Type: KAL 310 310/6/A3/S2, Year: 2008, Control: NC 22, Software: Homag, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 65, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 12-60, Min-max feed m/min: 10-25, Premilling: yes, Fine milling: yes, Application of separation agent: yes, IR zone: yes, Coil magazine: 2-fach, Mitre stations: HL 81, Bevel milling: yes, Corner tracing type: FF 12, 4 motors: Ja, Radius scraper: yes, Type of scraper: PN 10, Flat scraper: FA 11, 4 motors: Ja, Ersatzverleimteil : PU, Bonding part EVA: EVA, Buffing unit: yes, Separation agent setup: yes, Year :2008
Fabricante: Homag, Tipo: KLO 76, Año: 1994, Min-max material de borde mm: 0,5-3,0, Min.-max. longitud de la pieza de trabajo en mm: 150, Altura de la banda de bordes máximo mm: 55, Alimentación mínima máxima m/min: 10-25, Premolido: no, Zona IR: sí, Tira magazin: sí, Mín.-máx. cargador de listón mm: sí, estaciones Mitre: sí, fresado de radio: sí, 4 motores: sí, Raspador de radio: sí, Raspador plano: sí, 4 motores: sí, Ersatzverleimteil: sí, Pieza de unión EVA: sí, Pre-fundición Kg/Hr: sí, Unidad de pulido: sí, Correa/rodillo de presión superior: sí, Rodillo/correa: Riemen, Barra de aire comprimido: 6, Longitud de la máquina mm: 7500, Carcasa de ruido: sí, Año: 1994
Fabricante: Homag, Tipo: Rechnerkarte, Modelo: CPU-Karte 70 BO 10 MHz 2 RAM, Número de serie: 4-086-05-194,
Fabricante: Homag , Pieza de repuesto de la máquina: KL Seire, Año: 1999, Parte de encolado lado izquierdo: sí, para el lado izquierdo de la máquina: sí, Kantenmagazin: 10 fach, Accionamiento propio: sí, Altura mínima máxima de la parte de encolado mm: 60, Rodillos de presión: 5, Control de temperatura: sí, Mín.-máx. cizallas de recorte mm: 60, Magazinschächte : 10, Eje controlado: sí Schräge 20 Grad, Slewable horizontalmente: sí, Año : 1999
Manufacturer: HOMAG Maschinenstrasse, Type: Kf 62, Year: 1992, Work piece width min-max mm: Maschine 1 1200 mm<CRLF>Maschine 2 2600 mm, Min.-max. workpiece length in mm: 250-2600, Min.-max. workpiece height in mm: 10-50, Edge band thickness min/max mm: 0,5-3,0, Soft edge single side: no, MA 1 min - max working width: 250-1200, MA 1 chipper: yes, MA 1 fine milling: yes, MA 1 grooving: no, MA 1 glueing part Soft: no, MA 1 rough milling: yes, MA 1 radius milling 1: yes, MA 1 grooving: no, Min - max working width MA 2: 250-2600, MA 2 min - max edge material thickness mm: 0,5-3,0, MA 2 edge thickness 0.5-3 mm: yes, MA 2 chipper: yes, MA 2 fine milling: yes, MA 2 glueing part straight: yes, MA 2 trimming: yes, MA 2 Andruckzone : yes, Coil magazine: 2-fach, Feeding: no, Angular transfer: yes, Feeding speed max m/min: 10-50, Compressed air bar: 6, Premilling: yes, Flush/radius/chamfer mill ...
Fabricante: Homag Tellerwechsler, Año: 1999, Tipo: 8 Fach Wechsler, Longitud mm: Ersatzteil aus Weeke 195 T, Año: 1999
Fabricante: Homag, Recambio de la máquina: KF, para el lado derecho de la máquina: Rechts, Número de motores: 2, kW-Leistung : 0,62/300 HZ, Drehzahlen U/min : 18000, Siko Anzeige : sí, Rollentastung horizontal: sí, Detección vertical de rodillos: sí, Controlado neumáticamente: Revólver de 8 fach, Ajuste del revólver: sí, Estirable horizontalmente: sí, neumático gesteuert : sí, TEXTO LIBRE: Profilverstellung Pneumatisch,
Fabricante: Indramat Motor mit Getriebe Atlanta, Año: 1999, Tipo: MAC93C-0-FS/4HC/110-A-0, Kw salida: ca.10, Bauart Flanschmotor: sí, Preis pro Stück Euro: 1500, Disponible: sofort, Año : 1999
Fabricante: Homag Fräsständer Bündigfräsaggregat, Recambio de la máquina: KF Maschine, para el lado derecho de la máquina: rechts, Número de motores: 2, kW-Leistung: 1,1, Drehzahlen U/min : 18000, Siko Anzeige : sí, Rollentastung horizontal : sí, Detección vertical de rodillos: sí, Controlado neumáticamente: no, kW-output 2: 1,1/300,
El productor: Homag, Tipo: 2 Achser HC 010 o.Analogeingang, Modelo: 2-Achser F.mini-Controller Rev, Número de serie: 2-083-02-8071,
Manufacturer: Homag PU Verleimung , Type: KL 79/2/A20/S2, Control: Homatic NC 21, Work piece width min-max mm: 60, Min-max feed m/min: 10-25, Axis control: Einlauflineal, Einlauflineal gesteuert: yes, Premilling: yes, Fine milling: yes, Application of separation agent: yes, IR zone: yes, Coil magazine: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: yes, Corner tracing type: FK 13, 2 motors: yes, Vertical grooves: 2, Grooves, slewable-controlled: yes, Radius scraper: yes, Scraper with axis adjustment: yes, Flat scraper: yes, Spraying system 2: yes, Ersatzverleimteil : PU, Bonding part EVA: yes, Edge sanding: KS 10, Profile sanding top bottom: yes, Buffing unit: yes, Top pressure belt/roller: Band, Work piece refeeding: Bartgstedt ZHR, Compressed air bar: 6,
Hersteller : Senotec Füllstandsensor, Repuesto de la máquina: Homag, Tipo: 4-008-40-0144, Número de serie: 0-220-54-8330,
Fabricante: Homag, Tipo: FKR 78/C/A/S3, Montaje de la máquina: zerspanerteil zum Einkürzen, Min-max material de borde mm: 0,5-3,0, Ancho de pieza de trabajo min-max mm: 60, Min.-max. longitud de la pieza de trabajo en mm: 250, Mín.-máx. altura de la pieza de trabajo en mm: 10-40, Mín-máx. m/min: aprox.18, Mesa de alimentación: sí, Fresado fino: sí, Estaciones Mitre: sí, Pre-fresado: sí, Fresado cónico: sí, Raspador de radio: sí, Raspador plano: sí, Pieza de unión EVA: sí, Realimentación de piezas de trabajo: Bargstedt, Rodillo/correa: Riemen, Barra de aire comprimido: 6, Tipo de retorno: Bargstedt TFU,
El productor: Homag, Tipo: CPU PC Controlleinheit, Modelo: 5003, Número de serie: 2-083-01-6902,
El productor: Homag, Tipo: Homatic Achskarte, Modelo: Servo 4 Achser, Número de serie: 2-083-02-8075,
Fabricante: Homag, Tipo: Homatic Streckenprozzesorkarte, Modelo: 2-083-02-7013,
El productor: Homag Ausgangskarte , Modelo: HC 020 2 us o RC Glied, Número de serie: 2-083-01-5203,
Fabricante: Siemens Elektronikkarte 03410, Tipo: 3818, Modelo: 548 229 9001, Número de serie: A 8605 590 700,
Fabricante: Homag Siemens Achskarte Drehgeber, Tipo: ser 8808 B, Modelo: Drehge. Interfaz