other machines for plastic used for sale

Type: Ultrasonic welding machine #4711 Manufacturer: Telsonic #4709 Model: USP300+MPS-4+DHG2030 USP3000 vibration unit MPS4 controll unit DHG 2030 generator P1 pneumatic unit Frequency 20kHz Power 3000W Dimension : 850x700x2400mm Machine weight: 230 kg

Mixing Capacity: 300 l // Cooling Capacity: 1000 l ... more information

Conveyor belt / belt conveyor Belt width: approx. 1,400 mm Axle distance: approx. 8,000 mm Drive: 2.2 kW  ... more information

Elumatec cutting and machining center model SZB 620 Capacity: 120 units/change SBZ 610 (cutting + machining module for machining in pvc profials) SBZ 610 to SBZ 609 (manual steel insertion) with label printer SBZ 609 (reinforcement screwing, pvc + steel machining) Receiving table. The scope of processing in pvc: holes for drainage, venting, the importance of places for the installation of perimeter catches, milling holes for the installation of ventilators. Screwing steel reinforcements. The scope of processing in pvc + steel: holes for mounting the handle in the window, for mounting the post, holes for dowels. Very good technical condition, the machine has been working since 2017.

There are three Concept Laser M1 3D printers available, year of construction machine 1/ 2/ 3: 2009/ 2010/ 2012, operational hours counter machine 1/ 2/ 3: 82,046/ 93,781/ 68,167h, with Laser Rofin StarFiber 200, water cooling, screening machine and documentation, at machine 1 the laser is broken and the machine is without optics, machine 2 is fully functional, machine 3 is fully functional, but a machine software error occurs regularly, which has to be fixed, afterwards production can always be continued, an inspection is possible,

With length stop touchscreen, radio measuring rod and operating instructions, on-site inspection is possible. ... more information

Dryer Wittmann Silmax E600 dryer Year of production 2012 ... more information

infrared heater for PVC profile bending and all eqipment for bending. 220w and 3kw with this equipment you are able to bend PVC profiles, glaslists, mullions etc. set includes: Infrared heater, working table, 20 conductors for different pvc profiles. ... more information

Number Of Stations: 48 // Output (caps/min): 50000  ... more information

Year: 2012 The machine has been in production since 2017. - technically efficient, ready to work - after full service - four-head welding machine VS 750 - EV 850 4-axis CNC cleaning machine - transport/cooling station - rotating station - online connection - automatic work cycle - profile height: 30-185 mm - welding dimensions: 350 x 350 mm, 2600 x 4000 mm - 0.2 mm and 2 mm flash reduction - seal formatters - Windows touchscreen operator panel - drilling head for the lower/upper hinge - disc cutter 250 mm - 1 axis of longitudinal travel with gripper

Dimensions 6.000 x 3.000 mm Constructed in 2013 Moving paddled drums diam. 750 mm Staircase Discharging screw on bottom Combs for floating material We can add extraction drained screw on request ... more information

For sale is a laminating resin system from IMT SpraySystems. The plant is in very good condition, it has been properly shut down by personnel of the machine manufacturer and filled with mesamol for protection. New price of the system is 85000.-€. The system was cleaned and visually prepared. Circuit diagram, operating instructions and maintenance overview are available. The systems were regularly inspected by the manufacturer as part of a maintenance plan. Applications: Wind power (offshore and onshore) Shipbuilding Lightweight construction Automobile industry Railways (e.g. for the sealing of track beds) Aircraft construction (especially for the construction of the individual components) Corrosion protection Concrete renovation Chemical Resistant Equipment Wastewater (especially in the sewerage system) On request, at an additional cost, the machine can undergo factor ...

Production - Italy, release of 2013. It is in working condition. Nominal power - 22 kW phase - 3 a.c. 50Hz Weight - 990 kg Gives out cold - 70-80 kW. ... more information

Number Of Colours: 4  ... more information

Description Turbomixer Liters 800 ... more information

Mobile vacuum station for use on a degassing opening on the extruder or tool as well as for support in vacuum profile forming - a water ring vacuum pump VG-55 mounted on a welded and painted steel base frame with maximum vacuum Volume of 55m3/h, with kpl. connected supply and cooling system - Vacuum connection: 1x connection pipe with internal thread R1" or GEKA coupling and hydraulic hose 2TE DN25 length 700mm - a VA service water separator and storage tank with fresh water connection R1/2", level switch and drain tap for easier daily cleanse - a cooling coil built into the separation tank and removable cooling coil made of hde-ribbed tube - Water drain on water tank: R1 1/4" - Cooling water connection to cooling coil: R3/8" - an additional vacuum separation container made of steel (hot-dip galvanized) in front of a vacuum pump for separation (diffusion) of the  ...

The ProJet 1200 from 3D Systems is smaller than a coffee machine, is suitable for daily use and especially for the dental and jewelry industries. The post-processing unit is integrated in the device., Layer thickness: 0.03mm, resolution xy: 56 micron (effective 585 DPI), Vertical construction speed: 14mm per hour, Installation space in mm (x/y/z): 43x27x180mm, building material: VsiJet FTX, support material: Not mandatory, communication: LAN (Ethernet), Machine dimensions in mm (w x d x h): 230x230x370, Weight in kg: about 10, Power supply: 100-240V 50/60Hz, software: 3DSprint (not included), file formats: STL, Vertical build speed: 14mm per hour

ProJet 860Pro ColorJet Printer 3D printer used from 3D Systems for sale., Accessories: depowdering station, All specifications and operating/installation conditions according to manufacturer brochures. Errors and typographical errors excepted., Layer thickness: 0.1mm, Installation space in mm (x/y/z): 508x381x229, number of nozzles: 5x HP11 printheads, building material: VisiJet PXL Core, LBL 3D printing powder, VisiJet Binder, LBL 3D Binder, communication: LAN (Ethernet), Dimensions machine in mm (wxhxd): 1190x1160x1620, Weight in kg: approx. 370KG empty weight, Machine dimensions in mm (wxhxd): 1190x1160x1620

Polyjet printer Objet 1000Plus with Krumm Waterjet Objet 1000 for sale., Installation space in mm (x/y/z): 1000x800x500, Max. component weight (kg): 135, Dimensions in mm (w x h x d): 1960x2868x2102, Weight in kg: 2200, Resolution DPI (xyz): 300 DPI; 300 DPI; 1600DPI, minimum layer thickness (μm): 16, software: GrabCAD Print, network connection: LAN - TCP/IP, Power supply: 230VAC 50/60Hz; 8A single phase, certification: CE, FCC, Installation: 2015, Building platform: 1.000 x 800 x 500 mm, Max. construction volume (xyz): 1.000 x 800 x 500 mm, Min. wall thickness: 0.6 mm (0.8 mm for Digital ABS), Achievable accuracy: 0.1 - 0.6 mm (depending on component geometry, size, orientation, material and print mode), Resolution (xyz): 300 x 300 x 1,600 dpi, Horizontal layer thickness: High Quality 0.016 mm High Speed/ Multimaterial 0.034 mm, Number of print heads: 8 (with 96 nozzles each), Materi ...

Inv. Num. : 7416 Type: LXJ-2030 Producer: UNICH Created: 2014 Parameters: Laser power: 2x130 W Work table length: 3000 mm Work table width: 2000 mm Equipment: Radiator Compressor PC Software Exhaust fan The laser is designed for cutting plastics and wood.  ... more information