saws used for sale

Esterer DKV 1 movable shaft ! feed hydraulically hydraulic and electrically roller lift: hydraulic power: 55 kW Year construction year: approx. 1982 passage: 750mm = width, 160mm = height 2 x directional laser incl. approx. 15 Circularsaws including with Splitter unit screw roll; good

Very good scratch conveyor 80/60/2x 5750 (total length 7m) engine 3 kW

EWD HDN/SV with width adjustment TOP ZUSTAND ! (1982/2009) WATER-CLOSED FUEHRS, SIDE BRETTERKAPPSAEGE... Through width 735 Passage shoe710 Hub 600 Speed max. 300 Feed speed 0-15 m/min Feed capacity 8.5 m/min Total weight 12 t SPALTKEIL ARTA C WITH SIDE WAREKAPPSAeGE Very well maintained facility little cut ! HDN-SV STATUS: VERY GOOD

Code: 0003 Brand: BOTTENE Model: PUSH 100 - CE Standard Computer-operated automatic crosscutting machine with pusher for cutting of wooden boards - CE Standard The board fed in is analysed by the pusher and the data processed by the computer, which optimises the length according to different criteria chosen by the user. The boards are fed in by a pusher controlled by a brushless motor. The blade is driven by a motor and pneumatic cylinder located under the machine base. Blade diameter min/max mm 400/550 F30 Blade speed rpm 2800 Cutting capacity: with blade mm 450 mm 300 x 120 - with blade mm 550 mm 350 x 150 Blade motor Hp 5,5 Pusher stroke mm 5000 Positioning speed 65 mt/min Working table height mm 915 Unloading table with side ejectors Suction inlet diameter mm 120 Overall dimensions of assembled machine: mm 9900 x 1850 x 1550 h Overall dimensions for transport: ...

Swivel sliding table saw WA80TE from Altendorf with 2-axis scoring machine and in good condition Sliding table length 3000mm Saw blade swivel from 0 to 46 degrees Drive motor 5.5kW with automatic motor brake Saw blade diameter up to 400mm Cutting height max. 125mm Cutting width up to 1000mm Swivel angle and height adjustment electrically via buttons Cut-to-length stop ruler up to approx. 3200mm Width stop can be folded down Suction nozzle 80 + 120mm Sliding carriage lockable in any position 1 set of plastic saw blades with matching scoring tool 3 splitting wedges 2-axis scoring unit 2 protective covers 2 emergency stop switches Operating instructions CE Mark Neat machine with usual signs of wear. Minor scratches in the sliding carriage, as well as two repaired small incisions. Original paintwork, only a few spots dabbed V-belt and protective cover renewed. Di ...

-350 mm x 2000 mm max wood cross-section -Circular saw blade D900 mm -Special saw was only about 5 hours in use after the overhaul >> Made in West Germany 100%

Multi-saw WINTER MULTIMAX 170 - 500 XL – year of production 2021 – original manual and documentation - very good condition TECHNICAL PARAMETERS: max. cutting height 170 mm min. length of a single element fed for cutting 740 mm max. cutting width 500 mm feeding and receiving table 1200x600 mm max. disc diameter 505 mm sleeve diameter 80 mm saw spindle diameter 60 mm power of the motor driving the vertical support of the pressure rollers 0.75 kW main engine power 75 kW feed motor power 5.5 kW smooth adjustment of the feed speed on the inverter 2.5-24 m/min max width of element 850 mm table height from the base 820 mm transport dimensions (length/width/height) 3500 / 2020 / 2000 mm weight 4250 kg

Carriage length 3200 mm Motor power 5.5 kW Bmawcrk3xgg Scoring machine, motor power 0.75 kW You can call or write to us. We can speak and write German and Russian. You can also send messages in English. 38.2.2

Raimann ProfiRip KR 310 M My. 2004 Multi-blade rip saw with 2 adjustable saw blades Track width 340 mm Total - passage width max 950 instead of 800 mm Cutting height with / without pressure board 115/130 mm Workpiece length 450 mm min Saw blade max. diameter 380 mm Saw blade min. diameter 250 mm Saw blade bore 80 mm Saw spindle diameter 65 mm Saw spindle speed 3900 rev / min Engine 30 kW Laser - directional lights 3 pc. Operating push 6 bar Infinitely variable feed - speed 8-48 m / min. 1.5 kW Weight 3400 kgs Voltage 400V/50Hz

Manual Edger Esterer EWD DKV with task table good condition ! Immediately available !; Well

1 piece of scratch chain foerderer 900/500 mm (W/T) length = 34 m; Very good

Very nice good working sawmilling for sale Very nice well maintained sawmill line for sale Consisting of: Log task 4 strands, Isolation, regular users and depositors, Fully hydraulic tensioner Mayerhofer, Sash gang saw EWD GDZ GE 71 (passage 71 cm) Riving knife, Cuttingsaw for boards (automatic) Roller conveyor with pullers, cross conveyor for trimming, Edger PAUL KME II - Spliter unit,, Roller conveyor, Kick-off conveyor . grinders Very well-kept LINE! READY TO WORK

3 stueck unused electric motors for Saeege machines from Rueetschi 380 / 400 Volt 50Hz Dreick circuit 5.5 KW 11.3 A 2850 rpm With tool holder (saege leaf holder) Shaft diameter 30mm Diameter handle for saege leaf (middle) approx.55mm Diameter tool holder outside approx.165mm Total length motor approx. 570mm Total width approx. 200mm Price per piece Hole distance for screwing on the motor laengs 200mm Hole spacing Cross 200mm The abstinfers can be varied in the length and width, because the motor is screwed on to the console via T-slots. The T-slots are located on the motor. Thus, any hole distance would be feasible via a different console. Thread on the motor shaft is right thread (if the nut is in the clockwise, is tightened when the motor is counterclockwise and the mother is hooked- view from the front to the wave) Diameter of the thread approx. 28-30mm. direc ...

1 Post Saegeblaetter (8 Stueck) for Kaltenbach All Saegeblaetter either re-ground or Unused. 1 square diameter 560mm 5 stub diameter 500mm 2 square diameter 400mm Hole in the middle 50mm

GATER MACHINE Knife heights 125 mm You can call or write to us. We can speak and write German and Russian. You can also send messages in English. 38.5.1

Elektra Beckum BAS 450 DB Band saw Built in 1980 Motor 2.2 kW 400V 50 Hz Roller guide at the top and bottom Cutting height 300 mm G&-5079-M3CCNR

Weibert K350 Format circular saw Format sliding table: 3.2m Engine: 5.5kW 400V 50Hz S1 Speed: 3800- 5200 rpm Saw blade diameter: max. 400mm Electrical height adjustment Electric swivel 0-45° Cutting height 90°: 120 mm Cutting height 45°: 75 mm Cutting width: 1250mm with pre-scratcher D=120 bore 20mm Electrical height adjustment Weight 1100kg

max. cutting width : 5300 mm max. cutting height : 2200 mm Saw blade diameter : 300 mm max. machining thickness : 80 mm Saw blade bore : 30 mm Swivel saw head : manual Saw feed : manual Saw blade speed : 4750 min-1 Slatted frame: evasive Mounting : freestanding Suction : external suction Locking saw beam : manual Weight approx. : 1200 kg

Parcel cross-cut saw 6,00m similar. PRINZ HOLTEC electric length adjustment and saw feed, immediately available, ready to use! fully functional, fully operational, partially dismantled; Model: Cross-cut saw from Haskin AB, Swedish manufacturer; many parts are identical in construction to PRINZ systems - Year of construction: approx. 1996 - Max. package length: 6.00m - Dimensional tolerance: +/- 2 mm - Max. package dimensions: 130cm x 130cm x 6000mm - Hydraulic length adjustment for saw positioning - Hydraulic cutting feed (up, down) - Length adjustment with digital display to 1/10 mm (mm) - kerf width can be stored as offset value (kerf is included!) - Feed of the length positioning (FORWARDS/BACKWARDS) is infinitely adjustable depending on the direction (!) - Cutting feed/speed of the saw blade (UP/DOWN) is infinitely adjustable in each direction (!)  ...

Festo Jigsaw G&-5078-M36LJ