Manufacturer:
(Category: 308)
PVC - heating / cooling mixing combination Hot mixer 750 ltr. / Cooling mixer 2,500 l. Engine power: 212 + 45 kW ... more information
Milling Centre for EPS foams may be also applicable for other foams such as XPS, PUR, or other applications after conversion Platen length: 1000-1250 mm Plate thickness: 500-1250 mm Plate thickness: 40-250 mm including input and output; Unloading and stacking the plates stack Documents are available. A visit is possible after agreement at any time. Other machines and components for the production and processing of foams are available.
Capacity: 400 lt, flow rate: 1.5/6.6 m³/h. Equipped with Calpeda cm 22/1E pump (22O v, 50 Hz, 0.5 a) used for mixing water/glycol.1200x800x1900 mm100 kguncheckedloaded on truck ... more information
Mouldingpresse The MP / 3E is a hydraulic press for the production of Clayprofilen such as rubber seals, protective, decorative or chrome strips. By inserting an appropriate form template in the bolt head, almost any profile can be produced up to a diameter of 65 mm. Manufacturer: Wadhwa Type: MP / 3 p Year of construction: 1995 Temperature controller Speed controller Via a rotary control a stepless adjustment of the speed is possible heated sealing head The built-in heater in the bolt head is adjustable Foot switch Weight: 125 kg Fully functional All information without guarantee Sold only to businesses
M. No.: 560037 Colours: 6 Equipment / Additional information: Consists: • stacker • printing machine • Cup feeding • stapler Max. cup rim diameter 130 mm Min. cup rim diameter 55 mm production speed each according to cup size, quality and Raw materials with UV drying up to 24,000 cph (without positioning) With positioning 12'000/h - 15'000/h depending on cup, format and flap. El connection value with drying approx. 26 kVA Electrical connection 3 x 400 V, 50 Hz Air connection / consumption 6 bar / approx. 50 m3/h Weight approx. 7,800 kg
air pressure:8 bar Air consumption:NI 18 l/min.weight:110 kgdimensions of the machine ca.:700 x 300 x 1000 mm ... more information
Nr. 2 Rotary Star Valves1200x800x500 mm170 kguncheckedloaded on truck ... more information
This belling machine from Thyssen Nothelfer is a very complete line. The line is disassembled and has a throughput of up to 10m pipe length. – Brand: Thyssen Nothelfer – Year built: 1996 – Max. tube Ø: 500mm ... more information
Vecoplan Shredder Type VAZ 300/250 Year 1996 Previously used for plastic ... more information
Stock - No.: 1624 1 piece used strand pelletizer PREVIERO > adjustable cutting length type TA 200 NA year 1996 – partly overhauled in 2020 drive 4 kW + 0,37 kW 200 mm cutting width new control board FU controller We have more strand-pelletizers, waterring or underwater pelletizing units available ex stock Wuppertal Germany, You´re welcome to visit us. Please find our stock-list on the Homepage: plastictrading
MOBERT ROLLER 110 6M,, for pre-cut open top bags in a roll, packed in rolls with paper tape, for 1 - 2 - 3 lanes, different bottom shapes available, 2 lanes roll width 420 mm, 3 lanes roll width 300 mm, min roll width 150 mm, Max roll diameter 110 mm, minimum bag length 250 mm, max bag length 1.500 mm, Construction year 1997, Mother reel driven unwinder, max width 1.700 mm, slit and seal unit 1.700 mm. n.2 knives for 3 lanes, gusseting unit 1.600 mm 3 lanes, 2-lanes star-bottom folder, 2-lanes folder for C fold, n.2 automatic taping units, n.1 tension stabilizer for electric cabinet, excellent working conditions
EPS contour cutting line for the production of sloping roof, fillet and ridge panels, as well as freely programmable "contours". suitable for net block dimensions: 5300 x 1300 x 1300 mm. Version with oscillating panel cutting frame for the production of EPS sheets and special cuts. incl. block turner incl. automatic wire adjustment incl. trimming frame incl. plate chain conveyor incl. waste disposal incl. wire break detection (electronically controlled) incl. extensive documentation Visits are possible at any time by arrangement.
Stock number U1984-2 Used impact dryer for pellet by RIETER (Germany) model AERO 500 in stainless steel design (material 1.4541, AISI 321). Dryer is equipped with air blower providing 90 m3/min and driven by electric motor with power 18.5 kW. Dryer has reported output 4000 kg/h of outgoing product. Flow rate of water with pellet: 35 m3/h (maximal), 25 m3/h (nominal) and 20 m3/h (minimal). Nowadays machine has installed screens with mesh 1.2 mm. Machine new 1997. Shipping dimensions of dryer: width 1400 mm x length 3830 mm x height 2265 mm. Weight of machine – 700 kg. Body of drying chamber is sound-muffled. Technical documentation included in german language. Machine had been working on PP pellet.
Slitter rewinder Foil width: 1200 mm Unwinding diameter: 800 mm Winding diameter: 500 mm Maximum speed: 300m/min Air axis of unwinding 76mm Unwind control BST edge and line control Waste removal fan Side-opening roll removal door with safety lock and roll removal stand Device Control panel with digital display and digital counter The machine is in production and can be tested at any time
Shrink tunnel brand: Cometsa, model: T-30, length: 3 m, width: 0.65 m. Year 1997, with banding machine, model: EA 2500 of 2.5 m. ... more information
Power: 900 w, max. clamping force: 100 Psig (690 Kpa), stroke: 73 mm, plane size: 360 x 260 mm.1200x800x500 mm200 kguncheckedloaded on truck ... more information
This Battenfeld cooling tank is in machine storage at Plastima Used Machinery. The vacuum tank is from 1994 and is in great condition. Brand: Battenfeld Extrusionstechnik GmbH Model: V125VA Year of construction: 1997 Tube outer diameter max: 125 mm Cooling length: 6000 mm ... more information
Description of the Machine and Accessories Manufacturer: SALDOFLEX Model: MODULA S 1100 Year: 1998 Working width welding mm.1100 Minimum length mm.320 bags Film width (mm) Max. 1500 Maximum length of 700 mm bags (mm.1200 open mouth) Max mechanical speed strokes / minute 200 Maximum speed film meters / minute 160 Tupe bag:t shirt bag ,handle bag Drive:Servo Material that can be processed: LDPE, HDPE, BIO , LLDPE and recycled Number of lanes: 3 Photocell Antistatic bar With unwinder, cutter, bellows and blower table 2.Rebuilding in Saldoflex factory 2016 electric power supply: 400 Volts -50 HZ – 3 phases + earth wires.