lathes used for sale

Perfect, used short time. Lead Screw and Feed Shaft Lathe 3-axis position indicator Workpiece length (max.) 1.928 mm Turning diameter over bed 560 mm Turning-Ø over support 355 mm Turning diameter over gap bridge 785 mm Gap bridge length 170 mm Bed width 350 mm Travel X-axis 316 mm Travel Z1-axis 130 mm Swing range of top slide ± 52° Spindle speeds L 25-200 / H 200-1600 1/min Spindle bore 80 mm Spindle mount Camlock D1-8 Spindle taper MT 7 Feed X-axis 0,02 - 0,573 mm/R Feed Z-axis 0,059 - 1,646 mm/R Tapping, metric (47) 0,2 - 14 mm Tapping, diametric (50) 4-112 DP Tapping, module (39) 0,1 - 7 mm Tapping, whithworth (60) 2-112 TPI Tailstock quill diameter 75 mm Tailstock taper MT 5 Tailstock quill stroke 180 mm Tailstock traverse adjustment ± 12 mm Motor rating main drive 7,5 kW Overall dimensions 3,34x1,15x1,46 m Weight 2.720 kg 3-jaw chuck Ø 315 mm 4- ...

INDEX GSC 65 CNC Lathe YOM 1997, installed 1998 Turning diameter in chuck 250 mm Swing Ø above bed, max. 300 mm Turning length 400 mm Control: Index C 200-8 (Sinumerik 880) Axes X/Z/C Travel of Slides: Turret 1- X / Z travel 163 / 550 mm Turret 2- X / Z travel140 / 250 Spindle bore, approx. 65 mm Tool holder bore 30 mm Spindle speeds 25 - 5000 rpm Feed range 0 - 15000 rpm Spindle drive 0.5 - 40 kW Total electrical load 60 kW - 380 V - 50 Hz Weight, approx. 8,500 kg Accessories & Spare parts -SIEMENS CNC Continuous Path Control, Model 880 (INDEX C 200-8). Changed monitor. -Hydraulic high-power chuck ROHM HS 200/3 -Tailstock -Turrets: 3 -Rotation tools in Turret 1- 2, in Turret 2- 3. -Milling spindle- tool in Turret 2 -Tool stations: 8 / 12 / 8 + 28 tools in magazine -Coolant device with chip conveyor. -A lot of spares and accessories

WE OFFER AN NICE WORKING CONDITION AUTOMATIC LATHE WITH BAR FEEDER AND COMPLETE TOOLINGS MACHINE IS WORKING DAILY WORK IN THE PRODUCTION MACHINE IS INCLUDED WITH COMPLETE TOOLINGS FROM THE PHOTOS TECHNICAL DATA: BASIC DIMENSIONS Max turning diameter of main spindle mm Ø32 Max turning diameter of auxiliary spindle mm Ø32 Max drilling diameter of main spindle mm Ø13 Max drilling diameter of auxiliary spindle mm Ø13 Thread cutting - main spindle M10 Thread cutting - auxiliary spindle M10 Max diameter of driven tool mm 10 Max side thread cutting M8 Max turning length mm 220 Number of controlled axes 9 SPIN Speed of spindle rotation o/min 200 - 7000 Bore through spindle mm Ø45 TOOLS Number of holders for turning knives piece 6 Number of holders for drill holes pcs 5 Dimensions of tools mm Dimensions of tools Numb ...

Stock number: 3840 CNC LATHE Manufacturer: OKUMA, Type: LT 300 MY Machine NO.: 123046, Year of manufacture: 2006 Specifications: Main motor power 22/15 kw Main spindle speed range 38-5000 rpm Bore through drawing tube 70 mm dia. C Axis - Main Spindle Movement 0.001 Degree Y axis 160 mm +/- 80 mm Tool turret 1 with 12 stations Powered stations turret 1 12 pcs. Motor power driven tools 7/3.3 Kw Tool turret 2 with 12 stations Powered stations turret 2 12 pieces Driven werkzeuumdr. 45-4500 rpm Counter spindle Counter spindle speeds 38-3800 pr/min Motor Power Counter Spindle 22/15 Kw Control OSP P200L Fabr. Spindle operating hours 16692 hours Controlled in 7 axes Accessories: Hydr. Chuck main spindle Kitagawa B210 mm dia Hydr. Chuck Subspindle Kitagawa B-210 mm dia Tool holder VDI Chip c ...

WE SELL GREAT CONDITION BIGLIA EQUIPPED WITH COMPLETE TOOLS AND ACCESSORIES , BAR FEEDER LNS MACHINE HAS RUN ONLY 606 HOURS AND IT COMES WITH COMPLETE DOCUMENTATION AND ACCESSORIESS WE ORGANIZE DISMANTLING AND LOADING. FOR CUSTOMER WE CAN ORGANIZE AS WELL TRANSPORT .  ... more information

Machine is equipped wit h HEIDENHEIN DIGITALS 2 TURNING HEADS TURNING LENGHT 1800mm HOLE TROUGH SPINDLE 76mm WITH LINETS AND ACCESORRIESS, READY TO WORK. BEFORE LOADING MACHINE WILL BE CLEANED FOR THE CUSTOMER.  ... more information

Technical information Swing over bed 420 mm Distance centre tot centre 1000 mm Max longitudinal travel Z-axis 1028 mm Max cross travel X-axis 335 mm Spindle coneA2-6 Dia of spindle bore 56 mm Power on the spindle20/25 hp Number of speeds16 - 4000 rpm CommandMazatrol Cam T3 Total power needed18,5 kW - 32,9 kVa Length 3734 mm Width 1893 mm Height 2401 mm Weight 4400 kg Toolchanger yes Number of tools 16x - rotating yes milling tools C-axis Robo flex automatic loading system tooling included Measuring arm included MAZATROL CAM T-3 CNC Accessories Tailstock, Evoquator, Tool Attachments, Presetting Machine weight 4700 kg Axis C Yes

WE OFFER AN WERY NICE CONDITION VARTICAL LATHE CNC Vertical Lathe (VTL) with C-Axis and Milling spindle & Pallet changer Pietro Carnaghi - ATF 8 TM Year 1995 NUM 1060 II CNC Control Pallet changer with 2 pallets Pallet diameter 800 mm Max. workpiece weight 1500 mm Swing diameter 1100 mm Turning diameter max. 1000 mm Turning height max. 750 mm Table drive motor 60 KW Table speeds 1.5 ~ 1000 rpm C-Axis 0.001° Milling spindle drive 23.5 KW Milling spindle speeds 12 ~ 3000 rpm Tool taper BT 50 Automatic tool changer for 80 tools Full work area guarding Chip conveyor Coolant through the spindle Paper band filtration unit Good condition High accuracies Under power for inspection Available immediately WE CAN ORGANIZE FOR CLIENTS AS WELL TRANSPORT OF MACHINE TO THEIR L ...

Manufacturer UNIVERSAL LATHE POTISJE EXCELLENT CONDITION, USED ONLY FOR SUPERFINISH AFTER GRINDING Model PA-45 Year Condition used Location Slovenia Price 26.500,00 € Category Lathe Subcategories Stock Number Serial Number Max turning lenght 3000mm Turning over bed 600 mm, Spindle bore 140 mm, Turning in cranking 1.200 mm Face plate 800 mm

MACHINE IS IN GOOD WORKING CONDITION Machine need center horse and support for the clamp cutting tools. Bj0ie7dcoa Machine Has ben used in Switzerland, after thay realize they need that both suports, they took it off and use on other lathe.  ... more information

Center height 165 mm Center width 635 mm Turning diameter over bed 335 mm Turning diameter over face slide 210 mm Turning diameter in the offset 480 mm (only for lathes with removable bridge) Spindle nose 4 in. D.1. Camlock Spindle bore (largest bar passage) 40 mm Cone of the tailstock quill and the reducing sleeve MK 3 Weight approx. 855 kg Propulsion: Single-stage motor with a power of 5 hp

- Control: Heidenhain CNC Pilot 3190/4290 - Software update Turn-Plus - Turning diameter: 500 mm - Turning length: max. 635 mm - Spindle speed: 25-5000 rpm - 12-speed turret, no driven tools -Tailstock -Conveyor  ... more information

Qty. 1 Second-hand roll lathe Mfc.: Herkules Type: WD-700 Built: 1952 General overhauled by Hoesch-MFD in 1990 Centre height: 600 mm Turning length: 2750 mm 2-axis digital display – Mfc.: Micro Wizard Longitudinal drive Standstill torque: 14 Nm Rated revolution: 2500 RPM Feeding range: 5 – 100 mm/min. Rapid speed: 2500 mm/min. Plain drive Standstill torque: 14 Nm Rated revolution: 3000 RPM Feeding range: 5 – 100 mm/min. Rapid speed: 2500 mm/min.

CNC lathe BOLEY type BE 42 - Bi-spindle / twin-turret TECHNICAL SPECIFICATIONS: CN Type: MITSUBISHI Meldas 635LCC X1 axis stroke: 170 [mm] Z1 axis stroke: 200 [mm] X2 axis stroke: 110 [mm] Z2 axis stroke: 395 [mm] X3 axis stroke: 110 [mm] Z3 axis stroke: 170 [mm] Y-axis stroke: -/+ 40 [mm] Tool holder type: VDI 20 Spindle for clamping clamps: Size 48 DIN 6343 Spindle passage diameter: 42 [mm] Mini speed. Pin: 80 [rpm] Maximum speed. Pin: 8000 [rpm] C-axis indexing accuracy: 0.001 [°] Pin power: 7.5 [kW] Counter-spindle passage diameter: 42 [mm] Mini speed. Counter spindle: 60 [rpm] Maximum speed. Counter spindle: 6000 [rpm] C-axis indexing accuracy counter-spindle: 0.001 [°] Counter spindle power: 2.2 [kW] Maximum diameter. Machinable: 140 [mm] Number of positions - Upper turret: 12 Number of motorized positions - Upper turret: 12 Maximum speed. rotating to ...

CNC lathe sliding headstock STAR SR20R /// SR 20 R TECHNICAL CHARACTERISTICS: Year: 2000 NC Type: FANUC 18i-T Number of axes: 5 Max. length Machinable: 205 [mm] Max. diameter Turning spindle bar: 20 [mm] Max. speed Spindle: 8000 [RPM] C-axis indexing accuracy: 0.001 [°] Spindle power: 3.7 [kW] Max. diameter Counter-spindle bar: 20 [mm] Max. speed Counter Spindle: 4500 [RPM] C-axis counter-spindle indexing accuracy: 0.001 [°] Counter Spindle Power: 1.1 [kW] Number of end device positions: 4 Number of motorized end positions: 4 Number of comb positions 1: 6 Number of Comb 1 Motorized Stations: 4 Comb Rotating Tool Speed 1: 5000 [RPM] Number of counter-operation positions: 4 Number of motorized counter-operation positions: 4 Watering pan capacity: 155 [l] Supply voltage: 400 [V] RS232 port: Yes Hours Operating: 40920 [h] Weight: 2200 [Kg] EQUIPMENT INCLUDE ...

Benzinger TNI B6 CNC Tower TECHNICAL FEATURES: Year: 2012 NC Type: FANUC 31i Number of axes: 7 Y-axis travel: -/+ 40 [mm] Z1 axis stroke: 340 [mm] X1 axis stroke: 180 [mm] Z2 axle stroke: 440 [mm] X2 axis stroke: 195 [mm] X-axis fast feed speed: 30000 [mm/min] Z-axis fast feed speed: 30000 [mm/min] Y-axis fast feed speed: 10000 [mm/min] Spindle Nose: DIN 55026 A size 4 Spindle Bore: 42 [mm] Maximum speed Spindle: 8000 [RPM] Spindle power: 7 [kW] Counter Spindle Nose: DIN 55026 A size 4 Counter spindle bore diameter: 26 [mm] Maximum speed Spindle: 8000 [rpm] Spindle power: 3.8 [kW] Toolholder type: VDI 25 Turret Index Time: 0.4 [s/pos] Turret 1: JUMP Number of stations - Turret 1 : 12 Number of motorized stations - Turret 1 : 12 Maximum speed Rotating Tools - Turret 1: 6000 [RPM] Turret 2: JUMP Number of stations - Turret 2 : 12 Number of motorized stati ...

High precision tower SCHAUBLIN type 150 TECHNICAL SPECIFICATIONS: Year: 1998 Number of axes: 2 X-axis stroke: 180 [mm] Z-axis stroke: 600 [mm] Z-axis fast forward speed: 4000 [mm/min] Tip distance: 600 [mm] Peak height: 150 [mm] Diameter allowed above the bench: 340 [mm] Permissible diameter above trolley: 177 [mm] Spindle nose: CAMLOCK D 1-4'' Inner pin cone: CM5 Spindle for clamping pliers: B32 Spindle passage diameter: 40 [mm] Mini speed. Pin: 55 [rpm] Maximum speed. Pin: 3000 [rpm] Pin power: 4 [kW] Cone: CM5 Metric pitch range: 0.25 - 14 [mm] English pitch range: 112 - 1/2" [nets/inch] Modular pitches: 0.12 - 7.5 [modules] Watering tray capacity: 29 [l] Installed capacity: 6 [kVA] Supply voltage: 400 [V] Dimensions: 1730 x 970 x 1300 [mm] Weight: 1250 [kg] EQUIPMENT INCLUDED: x1 visualization HEIDENHAIN type ND780 (2 axes) x44 SCHAUBLIN B32 clamp ...

CNC Lathe MIYANO BNJ42-SY3 TECHNICAL FEATURES: Year: 2010 NC Type: Fanuc 0i-TB Number of axes: 7 Maximum diameter Turning time: 42 [mm] Maximum length Machinable: 100 [mm] Z1 axis stroke: 246 [mm] X1 axle stroke: 165 [mm] Y1 axis travel +/-: 40 [mm] Z2 axle stroke: 525 [mm] X2 axle stroke: 70 [mm] X-axis fast feed speed: 18000 [mm/min] Z-axis fast feed speed: 20000 [mm/min] Y-axis fast feed speed: 12000 [mm/min] Spindle Bore: 43 [mm] Minimum speed. Spindle: 60 [RPM] Maximum speed spindle: 6000 [rpm] C-axis indexing accuracy: 0.02 [°] Spindle power: 11 [kW] Sub-spindle bore diameter: 36 [mm] Minimum speed. Spindle: 67 [RPM] Maximum speed Sub-spindle: 7000 [rpm] C-axis indexing accuracy sub-spindle: 0.02 [°] Spindle power: 5.5 [kW] Max. section Tool holders: 20 [mm] Number of motorized stations - Turret 1 : 12 Maximum speed Rotating Tools - Turret 1: 4000 [ ...

Quick-change tool holder PARAT model RD-2 base 106 x 106 mm 9 Inserts 2 keys for turret 1 tool clamping key  ... more information

1 fixed setting stick with roller quills 1 moving setting stick  ... more information