lathes used for sale

Used lathe Internal machine number m3536 Manufacturer: Weiler Type DA 210/1000 Year of construction 2003 Ma.Number 710 Center width 1,000 mm Tip height 210 mm Spindle bore 52 mm Speeds 44 to 2,000 rpm. Total weight approx. 1,800 kg With digital display With approx. 20 interchangeable holders With complete instructions Item location: 59425 Unna The machine can be viewed and tried out under power. We will be happy to send you more photos by e-mail. A forklift for loading is available. Prior sale is reserved. It is possible to professionally examine the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition, is non-binding and has been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is excluded. The ...

General: Year of construction: 2011 Control Heidenhain Manual plus 620 Switch-on hours 9,504 h Spindle: Spindle speed 1 – 4,000 rpm Spindle bore 52 mm Circulation over bed 320 mm Circulation via face slide 150 mm Slide path flat 200 mm Tailstock: Recording MK4 Quill path 140 mm Center width 1,000 mm Dimensions and weight: Dimensions 2,700 mm x 1,700 mm x 1,700 mm Weight approx. 2,300 kg Other equipment and accessories included: Three-jaw chuck Röhm Duro T200 including large range of jaws Parat Tool holder 4-fold including large cassette assortment Coolant Setup

Lining, Multifix, 15KW, Mas. No. 07351501  ... more information

Specifications: Center height: 190 mm Center width: 1000 mm Spindle bore: 56 mm Bed width: 305 mm Speeds: 25 - 2000 1/min Drive power: 4 kW Tailstock mount: MK 4 Quill stroke: 150 mm Feeds: 0.022 -0.800 mm/rev Weight, approx.: 1500 kg Dimensions (WxDxH), approx.: 2160 x 1120 x 1670 mm Equipment: - 2-axis digital display - 3-jaw lathe chuck - Quick-change holder System Multifix - Lead and tension screw safety device - Spindle protection with limit switch protection - Swivel steel holder protection - Rotating grain tip - Bed stop - Coolant device - Emergency stop push button - Machine light

WEILER PRAKTIKANT 160 - 3-axle Heidenhain Digital -GS - Identifier -Heidenhain digital display -Tip height 160mm -Tip width 650mm -Turning diameter over support 195mm -Turning diameter over bed 320mm -Rod passage 40mm -Speed range 50-2500 rpm -Automatic longitudinal/plane feeds -Feed range 0.007-0.63 mm/rev -Three-jaw chuck 160mm -Quick-change holder incl. 6x cassettes -Collet device incl. 45 collets -Drill chuck / tip -Electric lining protection -2x bed stop -Swarf back wall -Machine feet -Coolant device -2x Emergency/Off -Complete machine documentation Dimensions: LxWxH 1.7x1x1.7Meter / Weight 700Kg Th9xvlzw

WEILER Matador, lead and pull spindle lathe, lathe Turning diameter over bed: 295 mm Turning diameter over support: 155 mm Turning length: 500 mm Tip height: 140 mm Bed width: 205 mm Spindle diameter in the front bearing: 60 mm Spindle bore: 36 mm Quill stroke: 85 mm Quill diameter: 40 mm Inner cone: MK 5 Centering tip: MK 3 Speed range: 15-3550 rpm Total power requirement: 3 kW Space requirement: approx. 1,500 x 500 x 1,500 mm Machine weight: approx. 750 KG Multifix base holder and insert Feed protection Work light

PBR TM 35x1500 Lathe Specifications: Center height: 350 mm Turning diameter over bed 720 mm Turning diameter over carriage 500 mm Turning diameter in the offset 960 mm Length of the offset: 350 mm in front of the spindle nose: 320 mm in front of the face plate 208 mm Face plate diameter 500 mm Spindle Passage 105 mm Weight approx. 3900 kg

WEILER PRIMUS VC - DIGITAL DISPLAY / NEW -CE marking -Built in 2001 -Tip height 140mm -Tip width 500mm -Circumferential diameter over bed 280mm -Circumferential diameter over face slide 135mm -Speed range infinitely variable 30-4000rpm -Rod passage 40mm -Automatic longitudinal/plane feeds -Three-jaw chuck 140mm Bod0uqakyeg -Multifix - Base holder with insert -Work light -Coolant device -Swarf back wall -Machine feet -Documentation Dimensions: LxWxH 1.6x1x1.6 meters / Weight 650Kg

- FAGOR 8055 control system - Max. turning Ø: 550 mm - Max turning length: 2000 mm - Tool turret with 8 stations - Travel distance: X= 300, Z= 2150 mm - Quill travel: 150 mm - Dimensions LxWxH: 4200 x 2100 x 2050 mm - Weight: 4,900 kg Accessories: various tools  ... more information

Stock number: 3739 CNC LATHE Manufacturer: RIKA, Type: D 8004-2 Machines NO.: 622160, Year of manufacture: 1999 Specifications: Max. circumferential diameter 240 mm dia. Turning length 350 mm Main motor power 5 kw Spindle bore 40 mm dia. C axis - main spindle movement 360 degrees Z ash movement 170 mm Z 2 Axis Movement 782 mm Tool turret 1 with 12 stations Tool turret 2 with 12 stations Sub-spindle Accessories: Hydr. Chuck main spindle mm dia Hydr. Chuck Subspindle mm dia Chip conveyance. Cooling water system. Length: 1600 mm, Height: 2100 mm, Width: 3100 mm, Weight: 2000 kg

Tool quick coupler used and new, various sizes Partly Multifix, C , B , A, E, ... We can also offer them new ones. Assembly on request or self-assembly ! Set size C , with 10 holders !  ... more information

Sharpen Height 170 mm Center width 650 mm Turning diameter above the bed 350 mm above the face slide 196 mm in the offset 535 mm Width in front of the front panel 165 mm Spindle Spindle bore 42 mm Spindle Nose D1-4" Camlock Morse taper in socket No. 3 MT Spindle speeds 3 speed ranges 0 – 3250 rpm Main motor 7.5 kW (10 hp) Machine height Floor to spindle centre 1070 mm Overall length 1250 mm Machine 2500 mm Overall width 1100 mm Weight 1250 mm between tips approx. 1450 kg

Control Sinumerik 810 D Circulation diameter over bed 490 mm Circulation diameter over face carriage 280 mm Turning length 1,000 mm Spindle bore 93 mm Speed ranges 1-625 / 1-3,000 rpm Drive power 16 kW Dimensions approx. 3.0 m / 1.8 m / 2.0 m Machine weight 3.6 t Tailstock stroke 180 mm  ... more information

Control Fanuc 0iTF Main spindle: bar passage 45 mm, drive power 13 kW, 0-6,300 rpm Counter spindle: drive power 7.5 kW, speed range 0 -6,300 rpm Tool turret with 12 positions for driven tools VDI 25 radial Drive power of the driven tools 4 kW Travel range of the y-axis + 40 / - 30 mm C-axis for the main and counter spindle Machine with precast dust edge, spindle extension, tool measurement, chip conveyor, additional high-pressure coolant pump 14 bar, Accessories: Short bar feeder for bar material length 100-1200 mm, Irco ILS KUL 5012 -II, as well as a material layer Breuninger ILS-MUK-70-IV, new tool accessories, clamping heads, chucks and connection adapter worth €18,000, chip conveyor, operating instructions

GILDEMEISTER CTX 320 linear V6 Turning-milling centre with complete equipment Year of manufacture: 12/2002 Control: SIEMENS 840D POWERLINE Machine number: 937060 Spindle hours: only approx. 18,245 (as of 06.05.24) Equipment: Main and sub-spindle Y-axis C-axis Turret with 12 driven tool stations approx. 10 pieces of driven tools approx. 25 VDI mounts 2 pieces collet chuck approx. 30 pieces of collets Parts Conveyor Belt Parts Pickup Probe Main Spindle Probe sub-spindle LNS QUICK LOAD SERVO III Bar Feeder 2 Foot Switches Operating Instructions/Documentation All other accessories visible in the photos and video are not included in the scope of delivery, so they are not part of this sale. The scope of delivery only includes the accessories that are expressly listed here, in the order confirmation and invoice. More photos on request. Equipment, technical dat ...

Universal CNC lathe BOEHRINGER NG 200 Manufacturer: BOEHRINGER Type [ type]: NG200 CNC double Control unit: Siemens 840D Year of construction[construction year]: 10/2001 Rotating diameter: 290 mm Turning length: 850 mm Control: SIEMENS 840 D Orbital diameter over bed: 600 mm Revolver 1 Revolver 2 Counter spindle Counter headstock Tailstock C-axis Powered tools Automatic machine doors – newly retrofitted Z-axis resolution: 40nm (2nm interpolated) Travel in Z: 740mm Rapid traverse speed in Z: 25 m/min Centering tip SK 30 X-axis resolution: 125nm (8nm interpolated) Travel in Z: 220mm Rapid traverse speed in Z: 25 m/min Distance between main and counter spindle: 1034mm Drive power: 30-72 kW Torque: 662 Nm Speed range max.: 4500 rpm Spindle head: Size 6/8 DIN 55026 Spindle diameter in the front. Bearing [spindle]: 120 mm Chuck diameter: 200-315mm Spindl ...

Year of manufacture 04-2021, S/No.: 318884 Smooth Ai Control Initial commissioning 09-2021 Max. turning diameter: 670 mm Max. turning length: 1,519 mm Max. bar passage: 65 mm Travel X1/X2/Y/Z1/Z2/W: 695/220/300/1,585/1,539/1,539 mm Drive power main spindle: 22 kW Max. speed: 5,000 rpm Drive power sub-spindle: 18.5 kW Max. speed: 5,000 rpm Drive power milling spindle: 24 kW Milling spindle 12,000 rpm Tool Magazine 74 Tool Positions Capto C6 Preparation for Renishaw RMP Renishaw RMP600 Probe Chip conveyor Cromar Combi 500 "Heavy Duty Package" Cromna Combi 500 - Discharge height 1,400 mm - Reinforced conveyor belt - Reinforced gears Cooling by the spindle, 15 bar pumps Preparation IKZ up to 70 bar 5-Axis Simultaneous Machining Package for Spindle 1&2 Cutting force monitoring Multi-tool function - 24 positions Kitagawa BB208 Interface for bar feeder Original Ma ...

Smooth Ai Control Max. turning diameter: 670 mm Max. turning length: 1,011 mm Travel: X/Y/Z: 695/300/1,077 mm B: -30° to +210° (0.0001°) Main spindle drive power: 22 kW Main spindle max. speed: 5,000 rpm Milling spindle Drive power: 24 kW Milling spindle max. speed: 12,000 rpm Tool Magazine 74 Tool Positions Capto C6 Preparation for Renishaw RMP60 Chip Conveyor, Right Discharge Automatic door Air blow-out on the milling spindle Mazak API Cylinder interpolation Overload Monitoring Max. program size: 8 MB G00 slope constant 5-Axis Simultaneous Machining Package for Smooth Ai EIA/ISO Function Simultaneous 5-Axes Tool Center PointControl/Simult.5-Axes Fine Spiline Interpolation (EIA) MT connect adapter Smooth synchronised tapping Robot Interface (Advance/Ethernet/IP)

804337 Spindle and nut X-axis TOS TRENS SN50 series  ... more information

Universal lathe Reiden S250 completely overhauled incl. accessories Preloved lathe in excellent condition has been completely overhauled incl. gearboxes etc. and is sold with some accessories (several bezels, three-jaw lining, etc.). Guides have been completely re-scraped, etc. Machine works and can be visited. We have to give away various accessories free of charge, as we have no use for them after the sale. Lathe has a crank to increase the turning diameter, e.g. when overtightening rims, etc. • Turning diameter above the bed up to 540 mm • Center height 250 mm • Distance between centers 2500 mm • Turning diameter above the face slide 310 mm • Turning diameter in offset 630 mm • Spindle speeds 16 - 1120 rpm • Dimensions L/W/H 3750/1100/1400 mm • Spindle bore 42 mm • Weight approx. 3500 Kg