grinding machines used for sale

Grinding length 500 mm Grinding width 250 mm Workpiece height 375 mm max. table load 350 kg Table longitudinal movement 525 mm Table feed 2-28 m/min Total power requirement 4.5 kW Machine weight approx.1900 kg Control NC Height: approx.2.60 m Width: approx. 2.10 m Depth: approx. 2.00 m Total weight with cooling lubricant container: approx. 2.3 t.

Extraction system from a tool grinding machine Vollmer. With the extraction system, hot or glowing chips can be extracted from grinding machines, e.g. from surface grinding machines Elb or from e.g. tool grinding machine Saake or Deckel and others. Power supply 400Volt. The machine is equipped with a chip drawer and sucks through a pocket filter which can be cleaned by means of a crank and vibration. Special price

Staehle grinding machine Manufacturer Greif Staehle auflage adjustable at angle Cooling agent tub Almost unused condition from a training workshop. Special price  ... more information

Double grinding buck Manufacturer Greif Type D20-1-1 Kw 0.55 New grinding wheels Neulack Very good and quiet run Grinding machine Abrasive Grinding Buck Double Grinding Machine Double Grinding Wheel Machine Special price  ... more information

Planetary grinders Manufacturer Precise In a suitcase with extensive zubehoer Rule transformer Tool holder SK40 with interchangeable tightening bolt Control range: 15000 - 45000 rpm Orbital speed 70 - 120 rpm when working horizontally max.: 70 rpm Radial delivery: 0.0001 - 0.002 mm Reception: SK40 electr. Connection: 220 V, 600 W Special price

! A B S O L U T E R S O N D E R R R E I S ! Drill grinding machine manufacturer Avyac from France, Built in 1983, Weight 800kg, Fully automatic with praezisions 6 jaw lining for drills up to 51mm. All dimensions of a drill can be adjusted. Machine under power ready for use. Special price Alzmetall Gühring Garant MK2 MK32 MK4 MK5 Flott Gillardon

Double grinding bracket, knife grinding machine Turning one side quickly, the other side running slowly in the water, e.g. for grinding knives Grinding wheel diameter approx. 300mm Weight approx. 250kg Ready to demonstrate under electricity. Special price  ... more information

Stichelbock, Stitch Grinding Machine Scripta, very good condition, Collets. More information on request Special price  ... more information

Double grinding buck Rema with cue equipment, large collecting tray, new condition. Grinding wheel diameter 300mm, 1.8kw Special price  ... more information

Saeege leaf grinding machine Grinding diameter max 1000mm without the pictured seed leaf, very easy to use, purely mechanical without CNC or NC, but perfect! Operating instructions Further data is not available at the moment. Special price  ... more information

Drill grinding machine drill Grinding drillautomaticallys automatically in one clamping. maximum drill diameter 60mm (probably 80mm) Also suitable for drills with three or four cutting edges. Ready for immediate use. Simon SP50 SP80 Special price ... more information

MADORA SB 1300X2500 aluminium grinding machine was built in 2018 in Poland. A highly reliable machine designed for a wide range of finishing operations i.e. deburring and edge rounding, achieves excellent machining results on the entire surface of the ground workpiece. For surface finishing of workpieces with a maximum thickness of 50 mm, the machine uses a 1300 mm wide technical fleece cylindrical grinding wheel with adjustable oscillation. The SB 1300X2500 aluminium sheet grinding machine is operated via a TFT control panel, which allows, among others, to adjust the machining thickness and change the feed speed of the gantry. The total weight of the machine is 2870 kg. Technical data of the MADORA SB 1300X2500 deburring machine - work table surface (L x W): 2500 x 1300 mm - maximum workpiece thickness: 50 mm - minimum workpiece thickness: 0.5 mm - feed rate: 0,5-2 m/min - numbe ...

BERNARDO BSG 4080 TDC surface grinding machine was built in Austria in 2018. Designed for fully professional production applications, the machine machines workpieces placed on a magnetic plate or directly on the work table with the utmost precision and accuracy. The hydraulically driven work table with a large magnetic platen moves on hardened and ground guideways, which have been additionally coated with a special Turcite-B coating to increase abrasion resistance. The hydraulic drive, in the form of a separate hydraulic unit with heat exchanger, prevents vibration and overheating, and also ensures safe table feed even under heavy loads. Radial and axial forces are evenly distributed on special bearings without play in the grinding wheel spindle. The BERNARDO magnetic grinding machine weighs 3400 kg. Technical specifications of the magnetic surface grinding machine BERNARDO BSG 4080 T ...

V-trade Economy BMT 2050 UH shaft grinding machine built in 2012 provides high precision and excellent machining quality of rotating surfaces with a maximum diameter of 200 mm. Technical specifications of the V-TRADE BMT 2050 UH grinding machine - maximum workpiece diameter: 200 mm - maximum workpiece length: 500 mm - power supply: 3x 400 V

3000 B CNC circular saw blade grinding machine was built in 2023 in Poland. The brand-new machine, equipped with intuitive software and a CNC controller with memory for 128 programmes, is used to sharpen the following types of circular saws, mainly used in the furniture industry for cutting laminated chipboard: – flat circular saws (GM) – alternately mitre circular saws (GS) – trapezoidal circular saws (GB) – trapezoidal-flat circular saws (GA) The 3000 B CNC circular saw sharpener allows for grinding tooth rake angles and tooth face angles in a single pass without removing the saw blade. The grinding wheel arrives at the tooth plane at two feed speeds – the slower feed increases grinding precision, while the faster one reduces sharpening time by up to half. To ensure precise feeding of the tooth under the grinding wheel, a claw feeder is used, which prevents the grindin ...

GEIBEL UND HOTZ FS 420 SC surface grinding machine manufactured in 2006 in Germany, is designed for single or serial grinding of workpieces. The machine, distinguished by its high performance and reliability, machines workpieces with a maximum weight of 150 kg with the circumference of grinding discs on a magnetic plate with holding force control and demagnetisation function. During the process, special sensors ensure that the grinding wheel is properly balanced, guaranteeing the highest precision and quality of machining. The GEIBEL & HOTZ FS 420 SC magnetic grinding machine uses an energy-efficient hydraulic system to drive the work table, which provides the exact oil flow required to move the table. The pump is equipped with special filters to remove ferromagnetic impurities and non-magnetic substances from the coolant, resulting in safe and trouble-free operation of the grinding m ...

TACCHELLA ELEKTRA 1518 MPC CNC grinding machine was built in Italy in 1999. Characterised by high reliability and performance, the machine is used in the process of highly accurate grinding of the external rotating surfaces of workpieces with a maximum length of 1500 mm and a diameter of 350 mm. The TACCHELLA CNC shaft grinding machine has a large workspace with tailstock, grinding wheel spindle and workpiece spindle. After placing a shaft with a maximum weight of 50 kg in the spindle holder, the workpiece is ground at high speed by an incremental encoder driven grinding wheel with a maximum diameter of 450 mm. In order to simplify the machining process, the ELEKTRA 1518 MPC CNC grinding machine is equipped with state-of-the-art features, such as the HOFLER BALANCE SYSTEMS VM 24 operator panel and a functional and user-friendly FAGOR CNC controller, which allows full control of the m ...

PONAR KOWARY NUA 25 tool grinding machine was built by the Polish company PONAR KOWARY (LAKFAM) in 1984. A machine characterised by a robust construction of high stability, is used in tool shops and workshops for precision grinding of tools and tooling. Grinding of workpieces is performed on a table with a surface area (L x W) of 915 x 135 mm with two handwheels for manual longitudinal movement (X axis) and transverse movement (Z axis) of the work table. The reliable grinding wheel spindle moving at 3850 and 5635 rpm guarantees rapid and precise machining. The total weight of the machine is 910 kg. The machine is offered with the extensive range of equipment shown in the attached photos, which includes: – driven divider to the instrument along the screw line – angle vice 2 pcs. – moving tailstock: 2 pcs. – 3-jaw chuck fi 160 + spanner – workpiece centre positioning tool ...

JOTES SOH-10 internal grinding machine was built in Poland. The SOH10 grinding machine is used in the finishing process to give the right shape and surface roughness to holes with a diameter from 10 to 100 mm and conical holes with a maximum apex angle of 30°. The high-performance spindle machines workpieces with a maximum diameter of 300 mm (with guard) or 450 mm (without guard). The total weight of the machine is 2900 kg. Technical parameters of the JOTES SOH-10 internal grinding machine - minimum hole diameter: 10 mm - maximum hole diameter: 100 mm - maximum hole length: 160 mm - maximum diameter of grinded workpiece (with guard): 300 mm - maximum diameter of grinded workpiece (without guard): 450 mm - spindle rotation speed: 70-700 rpm - manual spindle feed (1 wheel revolution): 2,5 mm - largest spindle turning angle: 15° - lateral manual feed of spindle (forward): 50 m ...

SAACKE UW I D CNC universal grinding machine was manufactured in Germany in 2020. The extremely powerful machine is designed for the fully automatic wet grinding of a wide range of tools, such as knives, cutters or drills. Machining is performed in a single work cycle, which significantly increases production efficiency, saves time and reduces costs. The SAACKE CNC tool grinding machine allows the use of a chain or pallet system for automatic tool feeding and machining of workpieces within it with a maximum diameter of 250 mm and a length of 480 mm. Precision tool grinding is performed in five numerically controlled axes (X,Y,Z,A,B) using grinding wheels housed in a 6-position magazine separated from the workspace with an automatic grinding wheel changing system. In order to guarantee high travel speeds and positioning accuracy, the X,Y and Z axes of the UWID CNC tool grinder are m ...