other wood working machines used for sale

Motor 11 kW Transport engine 4 kW Vibromotor You can call or write to us. We can speak and write German and Russian. You can also send messages in English.  ... more information

Motor 7.5 kW Transport engine 4 kW Vibromotor You can call or write to us. We can speak and write German and Russian. You can also send messages in English.  ... more information

Sell an Adol Aldinger combi machine consisting of sliding table saw, side milling machine and slotted hole drilling machine.Footprint with unfolded table and stop extensions, width 2m; Depth 2.7m, height table top 1m The saw comes with a side, longitudinal stop and an angle ruler. The cross stop is about 1.5m, with the screwed-on extension. The max saw blade through, esser is about 400mm The shaft for the saw blade has a diameter of 30mm. The sliding carriage can be swept off and has a movement of 1.5m. The whole carriage can be moved in the slotted holes about 40cm. The height of the saw blade can be adjusted by means of a hand crank. The table can be tilted continuously by 45° by means of a crank. The side milling machine is equipped with 2 Spindl shafts. Diameter 30mm Length about 180mm and 140mm. The height of the slotted hole drilling agreggat can be adjusted. The table ...

otor 18,5 W Metal impeller You can call or write to us. We can speak and write German and Russian. You can also send messages in English. 2.2.3  ... more information

Dimensions and weights Length approx. 2200 mm Width/depth approx. 1330 mm Height approx. 1300 mm Weight approx. 362 kg Dressing Dressing table width 260 mm Dressing table length 1120 mm Chip removal max. 4 mm Suction connection Extraction nozzle diameter milling machine 100 mm Suction nozzle diameter saw blade guard 30 mm Suction nozzle diameter thickness 100 mm Thickness Table length 545 mm Table width 258 mm Working height min. 5 mm Working height max. 225 mm Chip removal max. 4 mm Electrical Data Saw input power 2.2 kW Input power planer 2.2 kW Input power table milling machine 1.5 kW Connection voltage 230 V Mains frequency 50 Hz Milling spindle Mandrel diameter 30 mm Effective length 105 mm Height adjustment 110 mm Speed(s) 1400/4000/6000/9000 rpm(s) Milling tool diameter max. non-lowerable 160 mm Noise emission Sound pressure level no-load 80 dB(A)  ...

Filter separator for wood chips, wood dust, etc. on a chip hopper, chip silo. 104 filter bags with a total filter area of 222 m2. Explosion protection with Brilux explosion dampers Height 4400 mm, width 3050 mm, depth 2600 mm. Vibration cleaning of the filter bags.  ... more information

Code: 0239 Brand: SCM Model: D/80 Automatic double end tenoner with 10-groups (5+5) for furniture, doors, window frames, panels, prefabricated panels, tables, cladding, prefabricated houses, fibre cement, plexiglass and various Technical data: Working length mm 3200 Min working length on 1 track mm 75 Min working length on 2 tracks mm 150 Working height mm 180 Adjustable feed speed from 5 to 30 mt/min Heavy cast-iron structure Rubber-coated tracks Track lubrication unit Composition: Automatic scoring unit - Motor Hp 1,5 Hogging unit - Motor Hp 8/12 Automatic Spindle moulder unit - Motor Hp 6,5 - Rpm 3000/6000 - Shaft diameter mm 40 Spindle moulder unit - Motor Hp 5,5 - Rpm 3000/6000 - Shaft diameter mm 40 Spindle moulder unit - Motor Hp 7,5/9 - Rpm 3000/6000 - Shaft diameter mm 40 Overall dimensions for transport: Machine mm 4800 x 2400 x 1700 h + Shoulders (t ...

SPECIFICATIONS: Combined dresser-thickness planer 2 work tables Length: mm 2000 Working width: mm 400  ... more information

The machine was brought from Sweden. The machine did not work in Lithuania. You can call or write to us. We can speak and write German and Russian. You can also send messages in English.  ... more information

Field of work: Length 2830 mm Width 890 mm You can call or write to us. We can speak and write German and Russian. You can also send messages in English.  ... more information

The extraction table is suitable for free installation in the work area. Recirculating air unit with self-extraction. You can call or write to us. We can speak and write German and Russian. You can also send messages in English  ... more information

The extraction table is suitable for free installation in the work area. Recirculating air unit with self-extraction. You can call or write to us. We can speak and write German and Russian. You can also send messages in English  ... more information

Automatic through-turn machine Genini Miniautomat Automatic rolling machine from square timber, through Main spindle with 4.9/5.9 kW two-speed motor Variable spindle speed 1800/2350/3600/4700 RPM 1.5 kW hydraulic pump motor Maximum length of scantlings 950 mm Maximum turning length 120 mm Maximum turning diameter 80 mm Two bottom brackets with profiling knives 1 face spindle for drilling or face profiling 1 roughly rolling knife

Chipper-shredder Gross GAZ 62 Rotor length 600mm Rotor diameter 180mm Hydraulic drawer Autoreverse 22kw main motor Charging hole 600x900mm Drawer height 220mm Sieve 20mm Magnet for catching metal fractions Wagner magnete CE Certificate Machine dimensions: 188x153x172cmH Weight: 1550kg  ... more information

Oscillating drill Balestrini Pragma TOP 14 spindles Spindle layout per side: 5x horizontal 2x vertical Aggregate motor power 4 x 1 kW Oscillating motor power 0.37 kW Mechanical oscillation Max. oscillation length 100 mm Max. depth 60mm Minimum/maximum distance between units 85-890mm Spindle speed 6000/12000 rpm Independent drilling angle adjustment Oscillation speed control Maximum tool size 16mm Air demand 160 l/min Minimum working pressure 6bar 2 independent magazines for elements with feeder Machine dimensions 1500x2400x1600mm

Wood milling and turning machine We will provide you with more information about the machine by phone or e-mail.  ... more information

Used T-nut driving machine, brand made in China, MFG: 2007, serial number: unknown, good condition, works only on 380V power supply, engine 500 W Minghe type: YS7114-MH. The machine has an upper feeder for the T-nuts, supplying with a rotating wheel the T-nuts. Dimensions L = 120 cm x W = 60 cm x H = 160 cm, Net weight: 310 kg Net price 1.880 Euro + VAT, negotiable, FCA Oradea.

Chipper Plant, Wood Chipper, Drum Chipper, Disposal Line RUDNICK & ENNERS: Vibro troughs total approx. 30 meters long, 50cm wide Conveyors Sieving Scraper conveyor Sweep Drum sieve with metal detector Wood chipper HEINOLAN: Year of construction 2001 Feed opening: 650x250 mm Feeding speed: 84.5 m/min good condition - fully functional Can still be viewed during operation. Location: Austria, near Graz

Length Sorting Plant Sawn Timber Sorting Plant MAYRHOFER 5-Boxes Total length: approx. 22 meters Current: 1. Box: 1 meter 2nd box: 1.5 meters 3. Box: 2 meters 4. Box: 2.5 meters 5. Box: 3 meters good condition - fully functional - can still be viewed during operation Location: Austria, near Graz

Code: 0282 Brand: GMC Model: ROLL V 1400 Automatic 2-roller polishing machine for polyester and varnish - It is suitable for buffing of high gloss polyester or polyurethane paints, metals, marble and similar materials N° 2 rollers: one straight and one inclined - Thanks to this inclination, the rotating brushes, by oscillating, ensure a perfect polishing of the surfaces to be treated REVERSE" system , which restrains softens the reverses even with heavy materials like marble, wooden panels, etc. Length of 2 rollers mm 1400 Roller diameter mm 350 Useful working length mm 4500 Useful working width mm 1400 Motor hp 15 Working table height from mm 950 to mm 1180 Suction mouth diameter mm 200 Overall dimensions mm 6000 x 2350 x 1750 h Weight kg 2500