other machines for plastic used for sale

Rotor diameter: 500 mm Rotor width: 1200 mm kW: 30 ... more information

The plant is suitable for the agglomeration of thermoplastic films and fibers. Depending on the material, the throughput is between 500 kg – 1000 kg/h. The facility consists of: • Feed belt • Load-dependent control for the feed belt • Metal detection coil • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo Ce9vqix • Plastcompactor unit HV-70, which consists of storage silo feed auger, plastcompactor, central blower and cooling circuit • HERBOLD recutting mill type SML 45/100-S4-2 • Intensive cooling • Conveyor blower SZS II 630/200 • Screening machine • Undersize recirculation into the compactor silo • Material conveying type MFT with big bag station and automatic diverter to the on-site silo • Automatic exhaust air filter • Electrical circuit •Compressor.

Recycling of PET bottles and PET films: Film washing and drying system for processing small-cut polyester films. • Capacity 700 - 800 kg/h polyester • Little used, almost as good as new. • The machine is still in operation. • Incl. big bag bagging station. A shredder must be procured separately. This means that an almost fully equipped production plant can be purchased. Also Folien + Technik e. Kfm. D-73728 Esslingen Phone +49 1577 5329827

Plastic compactor Main drive 132 kW Complete system with recutting mill, fine material separation and recirculation, electrical control ... more information

rotorwidth: 300mm rotorØ: 450mm feed hopper: 250mm x 280mm rotor knives: 9 bed knives: 2; ready for operation  ... more information

Conveyor belt / belt conveyor Belt width: approx. 300 mm Axle distance: approx. 3,130 mm Drive: 0.75 kW new - only very short in use ... more information

Conveyor belt / belt conveyor Belt width: approx. 1,400 mm Axle distance: approx. 8,000 mm Drive: 2.2 kW  ... more information

ZEMAT PULSA ECO 500 impulse welding machine was built in 2019 in Poland. The compact machine with an open design is ideal for the efficient production of canopies, awnings, pergolas, roller blinds, banners, etc. The individual temperature control of the upper and lower sealing electrodes together with InvisiWELD technology produces strong, practically invisible seams with high precision. Furthermore, the operator has special hand tools at his disposal for the welding of, e.g. tabs, pockets and zippers. The ZEMAT PULSA EC semi-automatic impulse welder was implemented in production in 2023 and since then has been used for only a dozen tests. The total weight of the machine is 1800 kg. Technical specifications of the ZEMAT PULSA ECO 500 welding machine - machinable materials: PVC, vinyl, polyurethane (PU), polypropylene (PP), polyethylene (PE), rubber, acrylic, thermoplastic materials  ...

STRATASYS F370 3D printer was manufactured in 2020 in the United States. The innovative machine is used in a wide range of industries, i.e. industrial, educational, medical and business, and is designed for rapid prototyping and the creation of complex components with the highest accuracy of detail. The resulting parts are printed using advanced FDM technology, which involves applying successive layers of semi-fluid material from a heated nozzle. This technology, combined with the auto-calibration function, makes the F370 industrial 3D printer provide high quality prints and dimensional conformity without the need for manual calibration of the device. The offered STRATASYS FDM 3D printer is equipped with additional filaments and GrabCAD Print software with menu available in many languages. The total weight of the machine is 227 kg. Technical parameters of the STRATASYS F370 3D prin ...

Hydraulic press 80 t of stable design and high press force was manufactured in 2021. The hydraulic vulcanising press enables efficient processing of rubber and thermosetting plastics in manual or automatic mode. Excellent parameters and two electrically heated heating plates with a length of 1200 mm and a width of 1200 mm make the hydraulic vulcanisation press for rubber ensure high efficiency of 48 tons per month during three-shift operation. Technical specifications of the rubber press - press force: 80 t - heating plate dimensions (L x W): 1200 x 1200 mm - electric heating - distance between heating plates: 800 mm - dimensions of shelves (L x W): 1400 x 1400 mm - operation modes: manual or automatic - full technical documentation - CE certificate

Hydraulic vulcanising press 80 t built in 2021 is distinguished by its stable construction and high press force. The hydraulic vulcanisation press for rubber is designed for the efficient processing of rubber and other thermosetting plastics using two electrically heated heating plates with a length of 1200 mm and a width of 1200 mm. The hydraulic press achieves a capacity of 48 tonnes per month when operating in a three-shift system. Technical specifications of the rubber press - maximum press force: 80 t - electric heating - heating plate dimensions (L x W): 1200 x 1200 mm - distance between heating plates: 800 mm - dimensions of shelves (L x W): 1400 x 1400 mm - operating mode: manual or automatic - full technical documentation - CE certificate

ROTOX SZK 502 double head welding machine was manufactured in Germany in 2007. The machine designed to weld two 90° angle joints in one working cycle, achieves high process stability and optimum temperature of the welding plates and stop blades made of hardened stainless steel. Hollow PVC bar sections with a maximum length of 2550 mm are welded on a stable structure by two welding heads made of high-quality cast aluminium. The ROTOX double head welding machine weighs 550 kg. Technical specifications of ROTOX welding machine SZK 502 - machined parts: hollow PVC bar sections - maximum section length: 2550 mm - minimum section length: 440 mm - maximum section height: 160 mm - minimum section height: 30 mm - welding angle: 90° - welding stitch limitation: 2 mm - workpiece tensioning: pneumatic - screw spanner with hexagon socket 3 mm - jaw spanner 10/13 mm - control cabinet s ...

BIZETA BZ3T4P/8 welding machine was built in Italy in 1989. The machine is designed to perform a very precise and accurate welding of materials such as PVC and polyester by subjecting the surface of the material to high-frequency energy. Electricity in the form of an electromagnetic field generates heat, which softens the material and fuses its layers together. At the end of the process, the BZ3T4P/8 welding machine with rotary table cools the material surface while holding it under a high pressure of 22 tonnes, resulting in the formation of a very strong weld. The total weight of the machine is 3400 kg. Technical parameters of the high frequency welding machine BIZETA BZ3T4P/8 - welding force: 22000 kg - power: 22 kW - maximum working pressure: 160 bar - superposed circuits voltage: 110 V - power supply: 3x 380 V; 50 Hz - weight of machine BZ3T4P/8: 3400 kg

Laser printer for plastics FARSOON eForm 3D built in 2017. The printer is offered with complete equipment for preparing powder and cleaning prints. The equipment was used to a small extent for about 12 months, it worked for about 2000 hours. The device operated in a gas shield from a cylinder. Complete with printer: 8 nitrogen regulators. Technical data of the FARSOON eForm 3D printer: - open control software: any modification of printing parameters - laser type: CO? - laser power: 30 W - dimensions of the printing chamber (W × D × H ) : 250 × 250 × 320 mm - single print layer: 0.06 ~ 0.3 mm, adjustable - maximum creation / build speed: 0.8 l / h (depending on the material) - precise scanning system: Galvo - scanning speed: 7.6 m / s - power requirements: 380 VAC, 50/60 Hz, 16 KVA, three-phase five-wire - maximum temperature in the chamber: 190 degrees C - heating el ...

Inv. Num. : 7465 Type:- Producer:- Generated: Parameters: The line consists of the following parts: Copper wire winder (double) Gumolis Insulation Line Injection 2x Bongard (Vein Spreader) Main street Gumolis Shell.line Compensator Line unwinder Coil Housing Line Auxiliary towing Compensator Cooling Enclosure Cooling water tank Outdoor refrigeration units Large pump water system Stolberger Filling Machine Wire rewinding workstation Round semi-automatic Welding foil package Mechanical Profile Projector HV test room Thermostat - Oven 5 x Temperature unit for extruder

Inv. Num. : 7416 Type: LXJ-2030 Producer: UNICH Created: 2014 Parameters: Laser power: 2x130 W Work table length: 3000 mm Work table width: 2000 mm Equipment: Radiator Compressor PC Software Exhaust fan The laser is designed for cutting plastics and wood.  ... more information

Stratasys FORTUS 900mc 3D printer YOM 2015, USA Computer Numerical Control (CNC)- Brand: Touchworks Technology: Fused Filament Fabrication (FFF) Materials: Thermoplastics. Polymers/Thermoplastics: PLA, Polyesters, Polyamides, Polycarbonates, Styrenes: ABS, ASA, Polysulfones, Polyaryletherketone, Polyimides Two vials for main material 1508 cc Two vials for fixing material 1508 cc Automatic switching from one vial to another Feedstock format: Filament 95% rate of yield Total Installed Capacity: 7,5 kW Working volume (XYZ): 914.4 x 609.6 x 914.4 mm Details up to 200 kg Build volume 508.756164 L Min. layer thickness 0.51 mm X/Y accuracy: +/- .089 mm or +/- .0015 mm per mm, whichever is greater. Z part accuracy includes an additional tolerance of -0.000/+ slice height. Note: accuracy is geometry-dependent. The vacuum board is adapted for use with two sizes of construction s ...

as good as new, used, fully functional Conveyor belt with separating roller for injection moulding • Often used as a machine discharge conveyor belt or robot storage conveyor belt • Stable base frame with H-shaped base stand, mobile • Stepless angle adjustment - see pictures - possible • Stepless height adjustment up to max. approx. 1300 mm • Stepless speed control • Clear conveyor belt width approx. 270 mm • Conveyor belt length approx. 1750 mm When using the screw separating attachment, the larger parts of the separating material are conveyed to the side with the help of the screw. Smaller parts slip between the height-adjustable drain plate and the screw roller. • Left-throwing separation system • Height of the separation gap can be easily and quickly adjusted using knurled screws • Scraper above the auger roller prevents unintentional skipping of  ...

A unique opportunity without intermediaries for people who want to become self-employed in the field of plastic injection molding! As of 1.3.24, we are actively discontinuing our activities in owner-managed plastic injection molding. We have been active in this field for several decades, both for our own products made of thermoplastics (ABS / POM / PC / glass fiber reinforced PA ), as well as on a contract basis for renowned companies. For sale we offer our small plastic injection moulding shop (without real estate and fixed building installations) as a whole - with currently 2 fully hydraulic Aarburg injection moulding machines type Allrounder 320-210-750 and 320-210-850 as well as all peripheral devices - all from well-known brand manufacturers, such as 2 Thermolift Arburg 100-2, various conveyor belts, various temperature control units oil and water, chiller for the cooling circuit ...

WITH COUNTING STATION M. No.: 3.65-00001 Wiring Diagram No.: 8.62-00001 Equipment / Additional information: Consists of: -Infeed conveyor -Machine -Counting station -Discharge belt  ... more information