extruders used for sale

Extrusion recycling line made by EREMA type that has only been in use for a few years VACUREMA ADVANCED 1310T for the processing of rPET, Year of construction 2017, commissioning 2019, Capacity 600 kg/h, Approval in accordance with the standards of the F.D.A. (USA) and ESFA (EU) for the approval of the rPET granules produced with it is available. You can find more details at EREMA "Vacurema Advanced". Delivery Time: Short Term. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827

GWELL GWC 80-156 WPC production line manufactured in 2015 is characterised by high production efficiency. WPC boards are made by combining natural components with thermoplastic polymers. This results in a material with the high aesthetics of wood and the exceptional durability of plastics, distinguished by full resistance to fungus, insects and various atmospheric factors. The production line consists of: – GWC 80/156 twin-screw extruder – GWC 65/132 twin-screw extruder – CUT 240 saw – CAL 14000/6 calibrating table – ROL 240 2-caterpillar haul-off – unloading table The WPC profile extrusion line is offered with optional heads for forming different types of profiles from these products. To date, the machine has only been in operation for a dozen days and has not been used at full production scale. For an additional charge, equipment cooperating with the line can ...

PE 300 plastic recycling and regranulation line was built in China in 2011 by Zhangjiagang Wuhe Machinery Co. LTD. The extruder for plastics used in the processing and manufacturing of various types of materials can produce up to 300 kg of parts in one hour of operation. The complete PE and PP plastic extrusion line includes a compactor, screw, cylinder, conveying system, heating system and temperature control panel. Material production begins by heating the plastic to a maximum temperature of 300°C in the 11 heating zones of the PE 300 granulating line, controlled by thermoregulators. The extruder then presses the material further through a 100 mm diameter screw located in a cylinder with abrasion and rust protection. At the end of the process, the machine head moulds the plastic to give it the right properties and shape. The PE 300 extruder is equipped with thermoregulators with ...

Inv. Num. : 7186 Type: NE 7 Producer: WEBER Created: 1997 Parameters: Weight: 3200 kg  ... more information

Inv. Num. : 7235 Type: 6.5 Producer: Weber Generated: Parameters: Equipment: Calibration table ? Tow strap  ... more information

Inv. Num. : 7012 Type: DS 6.5 Producer: Weber Created: 1987 Parameters: Switch-on hours: 42,000 h Screw diameter: 65 mm Main motor power: 16 kW Profile width: 240 mm Output capacity: 100 kg/h Number of screws: 2 pieces Line Components: Extruder WEBER DS 6.5 - 17D Calibration table Uniplast UKT 3/3 Stacking table Uniplast UKR 600

Ribbon Extruder line Barmeg FB9-1300-WS/HT composed of Motorized mixer – 100 kgs mixing capacity Dosing unit – hopper 200 kg , sensor , Main engine – Barmeg, 3 phase, 190KW Screw and tube – approx. 6000 kgs/24h capacity, polypropylene Nozzle – Hanger Type, 1340 mm Plastic Film Width Water Bath – Cooling System, Closed Circuit 1000 L Capacity Cutting unit – 1340 mm plastic film width Furnace – Hot Air Blower, 90KW Goddets – 2 x segmente godet of the stretching unit 4 and 6 x rollers, oil heater, cooling cylinder with cooling system Full Fibrilator system – Needle roller working width 1300mm Winder Part – Sahm Winder 240E 232 Independent Winder Edge control unit – 2 x motor Shredder – 1.9 KW with return to hopper Thickness measurement – Betacontrol (year 2003), Barmeg control system

Sub-system consisting of extruder and rotating die head, / cooling ring with a diameter of 400mm. Extruder: RT 1651-1-100-30D Screw Ø: 100mm Year of production: 1996 Drive power: 180kW Screw length: 30D Screw+Cylinder: Reiloy Bimetal Die head: reversing 400mm die Ø Output capacity: 300 kg/h to 350 kg/h Max. output: more than 450 kg/h The extruder comes from the technical center of the company REIFENHÄUSER and was only in operation for a total of 12 years. Screw / barrel are in very good condition.

Plasmac ECO60HC recycling machine from 2014. Output approx. 100 - 120 kg/hour. A barrel and the screw is refurbished A motorized roll feeding unit is included Complete with water chiller unit.  ... more information

Output: Approx. 200 – 400 kg/h (info taken from manufacturer brochure, no warranties regarding actual product specific output) Extrusion height: 1250 mm Barrel: Feeding, mixing and output zone in good condition (measuring report by DEGUMA available), slight wear marks Feeding opening 110 x 85 mm, with feeding hopper Feeding roll (coolable), overhauled 4 tempering zones, plus screw and feeding roll (if required) Head: Without head Tempering: Without temperature control units, available upon demand Reducer: Dorstener spur gear i= 20.15,n2= 67,5 rpm recirculating oil lubrication system Driven by V-belts, i= 1,775 Motor: Siemens DC 70.5 kW motor, 50-2160 rpm, 168 A Dimensions: Approx. 3500 x 2000 x 2000 mm (length x width x height) Weight: Approx. 3000 kg  Machine mounted on base plate  Machine is cleaned

Used rubber extruder make Troester, type GSV 60/k-12-18D-m.S., Execution as desired, with or without vacuum Built in 1991, machine was in operation until the beginning of 2010 Feed roller Kpl. new drive with flat gear motor Screw speed max. 62 rpm. Engine power 22 kW Control with PLC and temperature control new on request Extruder similar to attached photos.

Used Troester rubber extruder type GSV 60/k-12-18 D with feed roll can be modified/overhauled according to customer\s specification, with or without vacuum, year of construction: 1991 machine was in operation until end of 2010. including feed roll, new drive with flat-gear motor screw speed: maximum 62 rpm motor power: 22 kW PLC control and TCU can be renewed, if requested.

Extruder KE 90 x 30-D for manufacturing of von TPE foam and compact profiles screw diameter: 90 mm L/D ratio 30:1 (2700mm) extruder with 11 temperature-controlled zones (electrically heated by fluids) Siemens electric drive, motor 45kW at 2500rpm year of construction 1996, machine in very good condition (preliminary used in test operations) melt application device (gear pump) double profil head (also used for extrusion-coaded framework belts) electric equipment partially available extruder mounted on movable baseplate

Manufacturer: Paul Troester Maschinenfabrik/Hannover Year of construction: 1978, machine was in operation until the end of 2015 Screw diameter: 150 mm Length: 16 D (approx. 2,400 mm) Screw speed: 2.5-25 / 4 - 40 U/Min. Centre height of the extruder: 1,100 mm Type of gearbox 3 TH 990 K / 2s, 2 speeds. Gear ratio: = i1 16.5: 1 i2 = 26.4: 1 Maximum gearbox output torque: 45,000 nm Maximum permissible injection pressure: 350 bar without limitation through the extrusion head. The extruder will be overhauled and designed/changed according to customer's specification. Below pictures 1-4 show an extruder overhauled by us.

Extrusion line for 3D monofilament composed of: - Extruder 1 spindle, brand: Bandera, 45 mm diam 25 L/D, motor: 10 hp. With drying hopper: 100 L, master dispenser. With electrical panel and variable speed drive. - Head for 3D monofilament. - 3 stainless steel bathtubs: 2 m. - Stretch: 4 rollers. With variator. - 2-point monofilament thickness gauge. - Winder: 480x500 mm diam. For large coils. - Large reel unwinder and double rewinder for small reels. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

1 Screw Extruder for Sale Brand: Maquiplast Diameter: 80 mm Ø L/D ratio: 20 L/D Engine: 30 kW (40 hp) Variable Speed Drive: Delta For more details or to make an enquiry, please contact us.  ... more information

PVC sheet extrusion line with head: 280mm, composed of: - 2-screw extruder, brand: Weber, model: DS.8.22, motor: 30 Kw (40 hp), load doser, degasser with vacuum pump. Variable speed drive and electrical panel. - Wide blade head: 280 mm. - Calender, width: 300 mm, diameter: 150 mm. 3 water-cooled rollers. With stretching. - Ink baths, dryer, stretch for several coats of paint. - Cutting shear. - 1-reel winder, width: 300 mm. - Various replacement rollers for ironboards, printers and engravings (drawings on foil). Ahem: Wood simulation. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Extruder 2 co-rotating screws: 40 mm Ø diam, 35 L/D, brand: Comac, motor: 37 Kw (50 hp) with variable speed drive, year: 1992. Designed to provide exceptional performance in the production of plastic materials. Its powerful 37 kW (50 hp) motor with variable speed drive ensures efficient and versatile operation. The Comac brand is synonymous with quality and durability in the industry, and this extruder is no exception. If you're looking for a reliable machine that has stood the test of time, this may be the perfect choice for your extrusion process. Contact Gester today for additional details on this Comac 2-screw co-rotating extruder and how it can improve your recycling and extrusion operations. Trust in the experience and quality we have been offering for more than three decades.

PET Sheet Extrusion Line Composed of: - Extruder 1 screw, brand: Union, 120 mm, motor: 185 KW (250 hp) double desasifier, year: 2002. - Continuous flow gear pump. - Self-cleaning hydraulic filter changer, brand: Erema, model: SW4/170 RTF. - New replacement spindle. - Head: 1400 mm, brand: EDI. - Calender: 1600 mm wide with 450x600-500 rollers. - 500 mm replacement cylinder - Silicone bath, year: 2017. -Winders. - Working width: 1200 mm. - Thicknesses: 0.2 to 1.2 - Production: 500 Kg/h. - Co-extruder 1 spindle, 80 mm, brand: PTI. -Dehumidifier, brand: Piovan, model: DP-620, year: 2022.

Extruder 2 screws : 100 mm Ø 15 L/D Brand: Mapre Model: E 2.66.100 Series No. 155 Engine: 30 KW (40 hp) Parallel spindles forced feeder CM 80 headcutter system with geared motor type F 30 AG 19 123752, no. 1910072-249, brand PIV Antrieb W. Reiner K.G. 2.2 KW (3 hp) Electrical control panel equipped with electronic frequency inverter and electrical temperature control panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.