The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.

subcategories
(3rd category level)

more 2123

 

Manufacturer:
(Category: 102)

AB 1
abb 3
ACE 1
AFM 2
AVM 2
BMP 1
CKD 1
CMT 2
CMZ 13
CS 1
DMG 26
DMS 1
DOOSAN 104
DSG 2
EMAG 26
Emco 44
Fat 5
FCB 1
FKD 35
FMB 4
GDW 7
GE 1
Haas 53
HBM 18
HNK 1
IMO 1
IMT 1
JET 1
KAMI 17
Kern 10
KIA 1
KME 1
KSI 1
LNS 7
M+M 1
MAE 1
MAS 9
Mazak 169
MCM 6
Machine: WEIPERT WEE Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)
item-No.: 165384678
New in: 1951
used
Price: used machinery auction RESALE 1.000 €

with three-jaw chuck 400 mm, tip height approx. 450 mm, tip width approx. 2,000 mm, quick-release device (4 sides), tailstock, retrofitted digital display, Acu-Rite, shelf, side cabinet, 2-door, pull-out cabinet, contents of various swivel accessories, steady rest, up to Ø 400mm ... more information

Machine: HERKULES WD-700 Carousel Turning Machines (Lathes)
item-No.: 27616485
New in: 1952
used

Qty. 1 Second-hand roll lathe Mfc.: Herkules Type: WD-700 Built: 1952 General overhauled by Hoesch-MFD in 1990 Centre height: 600 mm Turning length: 2750 mm 2-axis digital display – Mfc.: Micro Wizard Longitudinal drive Standstill torque: 14 Nm Rated revolution: 2500 RPM Feeding range: 5 – 100 mm/min. Rapid speed: 2500 mm/min. Plain drive Standstill torque: 14 Nm Rated revolution: 3000 RPM Feeding range: 5 – 100 mm/min. Rapid speed: 2500 mm/min.

lathes
date: 31.10.2024 add to watchlist
Machine: SKODA S2500 Å koda  heavy duty lathe
item-No.: 164835049
New in: 1952
used
Price: 175.000 €

Distance between lathe tips: 25 000 mm Swing over bed: 1800mm Speed: 0,45-91 rpm Workpiece weight: 70t Control system: CNC SIEMENS Sinumerik 840 Main motor power: 80 kW ... more information

Machine: HEIDENREICH + HARBECK V 3 Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)
item-No.: 160692673
New in: 1953
used

turning diameter over bed: 540 mmturning diameter over slide rest: 270 mmturning length: 2500 mmspindle passage: 60 mmturning speeds: 600 U/minRapid travel: steady for max. workpiece diameter from: 270 mmsteady for max. workpiece diameter from: 170 mmfaceplate: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine: G�?PPINGER D 250 High-speed lathe
item-No.: 162580569
New in: 1953
used

Ref. -No.: 10229Manufacturer: GÖPPINGERYear of construction: 1953Type of control: KonventionellControl: N/aStorage location: HalberstadtCountry of origin: DeutschlandMachine length: 4700 mmMachine width: 1450 mmMachine Height: 1300 mmWeight Of The Machine Ca.: 3,1 tSupply voltage: 380 VTurning Length: 3000 mmTurning Diameter Over Bed: 530 mmCentre Distance: 3050 mmSwing Diameter Over Bed Slide: 305 mmSpindle Bore: 58 mmTotal Power Requirement: 5,5 kWCirculation in the crank: 720 mm

Machine: WEISSER EUGEN DLNE Drehbank Rotating Benches
item-No.: 99349138
New in: 1954
used

Lathe and various small parts Manufacturer: Eugene of white Type: DLNE Year of construction: 1954 Top width: 2000 mm Bed width: 380 mm Bed length: 3410 mm Outer dimensions: 3,850 x 1,020 x 1.135 mm Net weight: approx. 2500 kg maximum speed: 935 RPM maximum speed faceplate: 710 RPM Tour is possible upon request.

Machine: FRORIEP KE 16 CNC Carousel Turning Machines
item-No.: 164711313
New in: 1955
used

faceplate diameter: 1600 mmswing diameter: 1800 mmturning height: 1500 mmSingle-column vertical lathe 2000 x 2000mmRetrofit: 1997Gr. turning diameter: 2700mmGr. distance f. face plate to bottom of toolholder: 2150mm chisel holder: 2150mmSupport swivelling up to 30°Chisel cross-section: 240x240mmsmall plunging diameter: 300mmSpecial equipment: Re-moulding, taper turning, thread cutting, constant cutting speedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine: HEIDENREICH & HARBECK S500 Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)
item-No.: 161132081
New in: 1955
used

serial number: 80131-0271 centre distance: 2000 mmcentre height: 250 mmbore diameter: 63 mmwith digital read-out: K+C Easson10L voltage: 380 V: 220 Vampere: 16 AThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

lathes
date: 31.10.2024 add to watchlist
Machine: WEISSER G1 Lathe 480 x1340 mm
item-No.: 164429364
New in: 1955
used

Heavy lathe, turning machine, lathe, center and feed screw lathe, center and feed screw lathe-Handover in the current condition as inspected-Switching spindle error, main spindle continues to rotate in neutral switching position-Manufacturer: Weisser, lead screw and feed spindle lathe type G1-Turning length: 1660 mm-Turning Ø over bed: 480 mm-Turning Ø without bed: mm-Turning Ø over support: 210 mm-Spindle bore: Ø 45 mm-Spindle speeds: 31.5 - 1400 rpm-Three-jaw chuck: Röhm Ø 250 mm-Accessories: incl. tool holder/tools see photos-Tailstock mount: MK4-Drive motor: 5.5 kW-Dimensions: 3150/1180/H1300 mm-Weight: 2800 kg

lathes
date: 26.10.2024 add to watchlist
Machine: WMW DLZ 1000 III Lathe
item-No.: 165424240
New in: 1956
used

Turning length: 8000mm, turning diameter: 1000mm, bed width: 800mm, spindle bore: 72mm, speed: 1800rpm, spindle power: 19kW, weight: 15,600kg. On-site inspection is possible. ... more information

lathes
date: 31.10.2024 add to watchlist
Machine: WEISSER PF200 Lathe 420 x1340 mm
item-No.: 164429363
New in: 1956
used

Heavy lathe, turning machine, lathe, lead screw lathe, lead screw lathe-Manufacturer: Weisser, lead screw lathe type PF200-Turning length: 1340 mm-Turning Ø over bed: 420 mm-Turning Ø without bed: mm-Turning Ø over support: 240 mm-Spindle bore: Ø 41 mm-Spindle speeds: 31.5 - 1400 rpm-Three-jaw chuck: Röhm Ø 250 mm-Accessories: incl., see photos-Tailstock mount: MK4-Drive motor: 2.5/3.5 kW-Dimensions: 2670/1000/H1230 mm-Weight: 1450 kg

lathes
date: 31.10.2024 add to watchlist
Machine: MEUSER M3A Lathe 550x1400mm
item-No.: 164330862
New in: 1956
used
Price: 4.250 €

Heavy duty lathe, lathe, lathe, center lathe and lathe, center lathe -Manufacturer: Meuser, master and feed spindle lathe type M3A -Turning length: 1400 mm -Swivel Ø over bed: 550 mm -Rotating Ø without bed: 800 mm -Rotating Ø over support: 300 mm -Spindle bore: Ø 58 mm -Spindle speeds: 15 - 810 rpm -Three-jaw chuck: Röhm Ø 250 mm -Faceplate: 500 mm -Accessories: incl. tool holder/tools see photos -Tailstock mount: MK5 -Dimensions: 2770/1070/H1310 mm -Weight: kg

Machine: MEUSER M3S / M-III-S Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)
item-No.: 164638004
New in: 1957
used

Machine Type: Lathe Manufacturer: Meuser Type: M3S Year of Make: 1957 Condition: used Offer will only be sent if a complete imprint is provided! Price 2.250 Euro incl. VAT Location Warstein , Germany Reference M-MEU-0724 DESCRIPTION We offer you a used lathe from the manufacturer Meuser. Technical data will follow. Accessories: Multifix C base holder, face plate 700mm Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!

lathes
date: 26.10.2024 add to watchlist
Machine: MEUSER Model M III S 360 Lathe
item-No.: 165424176
New in: 1957
used

Center height: 360mm, bed width: 430mm, turning length: 1500mm, with documentation. ... more information

lathes
date: 31.10.2024 add to watchlist
Machine: WEIPERT W 500 Center Lathe
item-No.: 165472118
New in: 1958
used

turning diameter over bed:500 mmturning diameter over slide rest:310 mmturning length:1500 mmspindle turning speed range:7 - 710 U/minfeed range:5,6 - 224 mm/mintotal power requirement:15 kWweight of the machine ca.:3,7 tdimensions of the machine ca.:2,9 x 1,4 x 1,6 mMachine with 2-axis digital readout- MULTIFIX quick tool change device- 3-jaw chuck

Machine: HEYLIGENSTAEDT 300 PV v Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)
item-No.: 12778996
New in: 1958
used

Tip height: about quilt 300 mm centre distance: 1500 mm circular diameter: upper bed 640 mm spindle bore: 67 mm spindle retainer: Gr. 8 taper tailstock: 5 MK spindle speed: 18 - 900 rpm feeds: longitudinal/plan 0.063 0.032 2.1 mm / U thread pitches: 0.5-14 mm electrical connection: 380 V, approx. 7.5 kW space: 1550 x 3100 x 1250 mm weight: approx. 3500 kg hardly used and therefore well-preserved bed lathe

lathes
date: 31.10.2024 add to watchlist
Machine: WAGNER D1500-15IV-100 Heavy lathe
item-No.: 156642614
New in: 1958
used

turning diameter over bed: 3050 mmturning diameter over slide rest: 2500 mmturning length: 21200 mmControl: Siemens type: 840D turning speeds: 0,236-60 U/minfaceplate: 3000 mmmain drive motor: 200 kWtailstock quill diameter: 900 mmroll stand: steady: 1200 mmsteady: 1200 mmsteady: 750 mmsteady: 750 mmwith live steady: 2000 mmfaceplate: 2000 mmThickness: 330 mmworkpiece weight: 200 ttotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

lathes
date: 31.10.2024 add to watchlist
Machine: WAGNER D1500-15IV-100 Heavy lathe
item-No.: 156879589
New in: 1958
used

turning diameter over bed: 3050 mmturning diameter over slide rest: 2500 mmturning length: 21200 mmControl: Siemens type: 840D turning speeds: 0,236-60 U/minfaceplate: 3000 mmmain drive motor: 200 kWtailstock quill diameter: 900 mmroll stand: steady: 1200 mmsteady: 1200 mmsteady: 750 mmsteady: 750 mmwith live steady: 2000 mmfaceplate: 2000 mmThickness: 330 mmworkpiece weight: 200 ttotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

lathes
date: 31.10.2024 add to watchlist
Machine: TOS S28 lathe
item-No.: 165229214
New in: 1958
used

For Sale: TOS S28 Lathe Type: Lathe Manufacturer: TOS Model: S28 Year of Manufacturing: 1958 Technical Condition: Good This TOS S28 lathe is a reliable machine, well-suited for various machining tasks. With its robust construction and proven performance, it remains a valuable asset for any workshop.

date: 20.10.2024 add to watchlist
Machine: ZPS AD6 Lathe
item-No.: 165354669
New in: 1958
used
Price: 200 €

serial number: 412101385000x900x1300 mm2000 kguncheckedloaded on truck ... more information