other metal working machines used for sale

YASKAWA MOTOMAN MH24 industrial robot was built in 2014 in Japan. The machine designed for a wide range of applications, i.e. load handling or machine operation, features an extremely robust arm with 6 axes. In order to optimise even the most intensive production processes, the used low-inertia AC servo motors guarantee the achievement of high speed and precision during workpiece manipulation. A special safety module equipped with two processors allows adjustment of movements within an optimum range by monitoring the position of the machine and its tool. This function reduces the space required for production equipment by installing safety guards in an area smaller than the range of motion. In the event of an emergency stop, the YASKAWA 6-axis robot stops on the designated path and does not deviate from it when restarted, preventing collisions with nearby objects. The YASKAWA MOTOM ...

3DYY 9-12PLC rotary transfer machine manufactured in 2020 in China by Zhejiang Mingwen Machine Tool Co., Ltd is designed for high-volume production of e.g. sanitary, gas and hydraulic fittings. The machine, which combines the features of several metal-working machines, performs sequential machining operations on parts placed in special holders, i.e. milling, threading and drilling, in just one working cycle. The finished parts, i.e. fittings, couplings and extensions, are distinguished by their high quality. In this way, the 3DYY9-12PLC transfer machine generates considerable savings, as well as ensuring production efficiency, thanks to its speed and flexibility. The multi-spindle machining center has so far been used to machine 1/2″ internal and external threads from fi 24 x 6k14 brass rod. It took less than 4 seconds to produce 1 external thread. The total weight of the machine is ...

KUKA KR30-3 industrial robot was built in 2015. This compact machine with a robust design is the perfect solution for many applications such as handling, milling or welding workpieces where short cycle times and high accuracy are required. The increased arm’s range of movement allows free operation in all positions, even in hard-to-reach places. In addition, in order to achieve excellent dynamic movements combined with high process reliability, each of the 6 axes is driven by a powerful servo motor. The KUKA industrial robot designed in this way optimises even the most intensive production processes, while maintaining the highest productivity. The KUKA KR 30-3 robot arm was used sporadically and worked a small number of hours. Its task was the operation of injection moulds (picking up, handling and depositing previously prepared cores). The KR 30-3 6-axis robot weighs 665 kg. Tec ...

KUKA KR 210 R3100 ULTRA F industrial robot was built in 2015. This versatile device designed for, among others, palletising, assembling or handling loads gives the ability to freely manipulate objects with a maximum weight of 260 kg. Its compact, long-reach modular arm has 6 servo-driven axes thanks to which the KUKA robot arm achieves excellent dynamic movements, combined with high process reliability. Throughout its lifetime, the machine has operated a total of 13396 hours. The KR 210 R 3100 ULTRA F 6-axis robot weighs 1154 kg. Technical specifications of the KUKA KR 210 R3100 ULTRA F robot - number of axes: 6 - arm reach: 3096 mm - payload: 210 kg - total payload: 260 kg - controller: KUKA KR C4 - axis movement range A1 axis: ± 185° A2 axis: -140° / -5° A3 axis: -120° / 155° A4 axis: ± 350° A5 axis: ± 122.5° A6 axis ± 350° - axis motion speed A1 axis: 105 ...

KUKA KR 210 R3100 ULTRA industrial robot built in 2015 is the perfect solution for a wide range of applications t.i.e. handling workpieces, assembly or palletising loads. The machine is characterised by an extremely robust arm with compact dimensions and an increased range of movement, which gives the possibility to freely manipulate workpieces with a maximum weight of 260 kg in all positions, even in hard-to-reach places. In addition, each of the 6 axes is driven by a reliable servo motor, making the KUKA robot arm achieve excellent dynamic movements, combined with high process reliability. To this date, the KR 210 R 3100 ULTRA 6-axis robot has worked a total of 9198 hours. The total weight of the machine is 1154 kg. Technical specifications of the KUKA KR 210 R3100 ULTRA robot - number of axes: 6 - arm reach: 3096 mm - payload: 210 kg - total payload: 260 kg - controller: KUKA  ...

MACRI ITALIA PROVAR 6-90 U-D tube bending machine built in 2021 in Italy is designed for fully automatic, precise bending of tubes and profiles with a maximum diameter of 90 mm. The machining process is performed by the machine in 6 numerically controlled axes (X, Y, Z, B1, B2, A) by means of a movable working head with ground gears of superior strength. Each axis is additionally equipped with reliable brushless servomotors, which guarantee excellent dynamics and positioning accuracy throughout its lifetime. The MACRI ITALIA mandrel bending machine is offered with an extensive range of equipment, including top brand components (BOSCH REXROTH, SCHNEIDER, etc.) and innovative 3D software with anti-collision system and automatic workpiece correction. The machine is practically new – it has worked for only 20 hours. The PROVAR 6-90 U-D CNC bending machine weighs approximately 6500 kg.  ...

SODICK AG40L die-sinking EDM was built in 2011. This highly efficient machine is used for precision electrical discharge machining of workpieces with a maximum weight of 550 kg, enabling complex shapes to be achieved in even the hardest materials. Furthermore, workpieces machined in this way do not require other secondary processes to be undertaken, such as polishing. The installed CNC control has a useful perfect active control” function for simultaneous control of high-speed electrical discharges and axis movements, using 1 Gbit/s serial communication technology. The SODICK AG40L LN2 sinker EDM is offered with extensive equipment, consisting of, among others, an EROWA measuring probe, a 4-position linear tool changer and tooling. The total weight of the machine is 3900 kg. Technical specifications of the SODICK AG40L die-sinking EDM - feed in X/Y/Z axis: 400/300/270 mm - work ta ...

HEBÖ STM 4 M wrought iron machine built in 2005 in Germany is used in the production of gates, fences or railings. The simple design, combined with a reliable motor and high-quality tools, enables efficient machining of components with high repeatability. Technical specifications of the HEBÖ STM 4 M wrought iron machine - power: 5 kW - power supply: 400 V; 50 Hz - weight of machine: 830 kg

AGIE AGIECUT CLASSIC 2S wire EDM machine built in 2004 in Switzerland is used for the production of, among others, precision dies, tools and punches. Workpieces with a maximum weight of 450 kg are machined using electrical erosion, which can achieve complex shapes in even the hardest materials. This process is performed in a dielectric-filled work tank using a wire with a maximum diameter of 0.33 mm, which is threaded through a special AGIEJET system. The workpieces machined in this way do not require any other secondary processes such as polishing to be undertaken. The AGIECUT CLASSIC V2 wire EDM machine also features an intuitive CNC control with many useful functions. It is possible to purchase the dedicated cooler shown in the photos at an additional cost – price negotiable. The AGIE EDM machine weighs 2580 kg. Technical specifications of the AGIE AGIECUT CLASSIC 2S EDM machi ...

AGIE CHARMILLES PROGRESS FOCUS 3 wire EDM machine was built in 2012 in Switzerland. The machine is used for precision electrical discharge machining of workpieces with a maximum weight of 800 kg, which makes it possible to achieve complex shapes in even the hardest materials. The machining process uses wire with a maximum diameter of 0.33 mm, which is threaded through the semi-automatic AGIEJET system. Moreover, workpieces machined in this way do not need to undertake other secondary processes such as polishing. The AgieCharmilles wire EDM machine is offered with an intuitive CNC control and a portable control unit with LCD display AGIEJOGGER. There is also the possibility of retrofitting the machine with the cooler shown in the photos at an additional cost, price to be agreed. The PROGRESS FOCUS 3 EDM machine weighs 3900 kg. Technical specifications of the AGIE CHARMILLES PROGRESS ...

ABERLINK Axiom Too HS coordinate measuring machine built in 2022 in the UK, is used to make extremely accurate measurements of workpieces weighing up to 500 kg. Thanks to the use of state-of-the-art technology, the highest accuracy and objectivity is ensured, ideal for measurements with tight tolerances. The ABERLINK CMM machine uses, among others, 0.1 µm resolution scales in each axis and drive rods, which make it measure around 20% faster than the standard variant. In addition, the machine’s compact design with a high-quality granite work table makes it an excellent choice for use in both laboratory and production hall environments. The Axiom Too HS measuring machine is offered with an extensive range of equipment, including the revolutionary Aberlink 3D software, the RENISHAW TP8 touch-trigger probe and the RENISHAW PH10 PLUS indexing head with PHC10-3 controller. Technical s ...

KOLZER DGK36″ PVD sputtering machine was built in 2017. This specially constructed machine is used in the vacuum coating process, after which the workpieces are characterised by a metallic effect” with high resistance to abrasion and chemical agents, as well as innovative colours. The PVD sputtering process involves the expulsion of metal atoms from a target (evaporation material) placed in the working chamber, which are then transferred and deposited onto the surface of the workpieces. In this operation, the target is exposed to a technological vacuum, consisting of process gas and high voltage. At the end, the workpiece surfaces are cleaned and activated by the plasma installed in the machine. This solution offers virtually unlimited possibilities for coating any type of surface. In order to meet all demands and requirements, the KOLZER magnetron sputtering machine meets the hig ...

H.E.F. HEF DURFERRIT salt bath nitriding line was built in 2001. This highly advanced production line makes it possible to improve the mechanical properties of the workpiece by increasing its strength and resistance to wear and corrosion. To achieve this, the workpieces undergo thermo-chemical treatment in the form of salt bath nitriding, which results in an anthracite or black colour and a surface hardness of up to 1300 HV. The H.E.F. HEF DURFERRIT thermo-chemical treatment line has been continuously serviced and upgraded throughout its service life. About 2.5 years ago, the lining and heaters were overhauled and the main nitriding ladle was replaced. It is also possible to purchase a new spare main ladle for the offered machine at an additional cost. The production line includes: – a ladle for washing/rinsing workpieces (3 pcs.) – plunge pre-heating furnace – SURSULF nit ...

METRIS-NIKON MCA II 5124 measuring machine built in 2011 is a versatile device that can be used for measuring both small-sized objects as well as complex, large-sized parts. In addition, thanks to the computerisation of measurement procedures and its compact design, the machine can be used directly in the production environment or even inside the measured objects. The measurement process starts with an angular displacement of the arms to ‘pass’ through reference points. The operator then brings the machine’s measuring tip to the surface of the measured workpiece and validates the coordinates using a button located on the head. The coordinates are then transformed by the calculation procedures to the cartesian system (X,Y,Z), where they are used as the basis for determining the dimensions by approximation of the measured features and geometric figures, i.e. circles, cylinders and ...

SHUZ TUNG CNC 50 BRM CNC tube and profile bending machine built in 2014 in Taiwan allows for fully automatic, serial production of complex spatial workpieces in 5 axes with simultaneous hole punching. Excellent precision and accuracy of bending are guaranteed by the reliable servo motors used in the machine, which are responsible for realising the main working movements, i.e. bending, rotation and material feed. The rest of the movements are driven by a central hydraulic system with electronic lubrication. The SHUZ TUNG CNC mandrel bending machine is operated via a control panel with an installed CNC controller with the option of saving an unlimited number of programmes. In addition, the automatic servo bending machine is equipped with several bending rolls, a high-quality mandrel and an actuator to support material feed. The 50 BRM automatic CNC mandrel bending machine weighs 3500 kg ...

ACCUTEX GA 43AL wire EDM machine was built in 2018 in Taiwan. This highly efficient and reliable machine can achieve complex and difficult shapes, making it ideal for the production of precision tools, dies and punches. The traditional drive has been replaced by a direct, closed-loop linear drive system to eliminate backlash and increase cutting capacity by up to 10%, with much lower energy consumption and constant operating temperature. The GA 43AL EDM machine features a state-of-the-art AccuteX CNC control based on a Windows system with touchscreen and compatibility with CAD/CAM software. The controller optimises the machining parameters according to different wire diameters, corner angles, arc radius and workpiece thickness for the best cutting efficiency and accuracy. The wire EDM machine weighs 2800 kg. Technical data of the ACCUTEX GA 43AL wire EDM machine - CNC control: Acc ...

HEXAGON OPTIV CLASSIC 321 GL tp optic measuring machine was built in 2009 in Switzerland. This technologically advanced machine is the best solution for highly accurate measurement and inspection of e.g. electronic parts, micro-hole dies, fibre optics and inkjet nozzles. Thanks to the use of an 8-segment LED ring light with RGB colour sensitivity adjustment, the HEXAGON vision measuring machine detects and captures the edges of coloured parts much more easily compared to standard greyscale or lighting modifications. The offered machine also features, among other things, a 3 axes microprocessor CNC with vector path control, a CCD camera with 6.5x zoom and PC-DMIS Vision metrology software with the innovative MultiCapture function, which finds all 2D characteristics in the field of view simultaneously, increasing the inspection speed by up to 50%. The total weight of the machine is 170 kg. ...

OKUNO MSC-15 spring coiling machine was manufactured in 1998 in Japan by OKUNO Machine Co. The machine designed for the efficient production of springs from wire with a maximum thickness of 0.3 mm, consists of a wire spool rack with a braking system, a heating device for annealing and a forming machine. The wire processing process begins with taking material from a spool mounted on the machine stand, which is then fed into the heating device to anneal both ends of the spool. The pre-treated material is then fed further into the forming machine, where it is shaped into a spring by automatic cutting and bending. The length of wire feed is regulated by a digital indicator located on the machine frame. Technical data of the OKUNO MSC-15 spring coiling machine - maximum wire feeding length: 10m ± 5 mm - thickness of material: 0.15 – 0.3 mm - material width: 5.0 – 15.0 mm - maxi ...

Scaffolding production line built in 2015 is designed for the efficient production of steel boards used in construction scaffolding. The sheet metal unrolled from the coil goes through a straightening machine and is then subjected to the relevant machining stages. At the beginning of the machining process, the appropriate side holes are punched and the sheet is perforated to ensure adequate slip resistance. In a further stage, the sheet goes through a rollforming line, which gives the final shape of the board. The installed software of the machine allows to choose from 8 different steel scaffolding board lengths ranging from 0.73 m to 3.07 m. A complete steel scaffolding boards production line with tooling performs the entire process fully automatically. The automated production line for construction scaffolding boards consists of the following components: – software – B&R PP41  ...

LXSHOW LXW 2000 W FIBER laser cleaner manufactured by Chinese manufacturer LXSHOW Jinan Lingxiu Laser Equipment Co., Ltd. in 2022, is a widely used industrial device designed to remove e.g. rust, paint, oil and oxide layers from the surface of workpieces. The use of the laser cleaner guarantees the removal of contaminants without any damage to the surface and achieves exceptional cleanliness, impossible to achieve with conventional workpiece cleaning. Laser cleaning is performed without the use of chemicals or cleaning solutions, making the fiber laser cleaner environmentally friendly. At the end of the process, the waste takes the form of a solid powder, easy to store and recycle. The LXSHOW fiber laser offered together with the reliable 2 kW RAYCUS RFL-C2000 generator ensures long-lasting, uninterrupted and highly efficient performance at a low cost of operation. The LXSHOW LXW20 ...