other energy machinery used for sale

description: S7 control for full bottle transport. Partial range from filler to labeler. capacity range was approx. 55,000 beer bottles 0.33/0.5 l all information without guarantee Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK technicians are working worldwide for our customers! We are looking forward to h ...

Brake module, brake unit, brake chopper-Manufacturer: Lenze, brake module from CNC machining center Santenberg GTC S 2-Type: EMB9352-E-Input: DC 725V Imax=25A-Output: Pav= 19 kW Ppk = 32 kW-Number: 1x braking module available -Dimension: 55/380/H185 mm -Weight: 2.3 kg ... more information

Cooling output: 11,000W, max. operational pressure: 30bar, connected load: 6.5kW, an inspection is possible. ... more information

Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low-voltage networks, circuit breakers for transformer, generator and system protection, switch disconnectors, disconnectors-Manufacturer: Moeller, switch disconnector from CNC machining center Santenberg GTC S 2-Type: P7-160 DAOV-NZM7-Slewing drive: with extension-Dimensions: 440/105/H180 mm-Weight: 2.1 kg

Description: Cogeneration plant for the electricity production from renewable sources The machine was created to be fueled with vegetable oils of rapeseed, sunflower and soybean oil, but thanks to the complex heated introduction system, it can burn animal fats and palm oil. The hourly production of electricity is equal to 940 kw/h The machinery is composed of: power source ,with fuel heating before combustion (underground tanks excluded) WÄRTSILÄ NSD 6R22/26 engine, produced in 1999 with a power of 1,065 kw at 1,000 rpm (power reduced to 940 kw/h to comply with authorisations) alternator DENOX system control panel catalytic silencer with cover and chimney chiller for cooling and heating systems hot water generation system with heat exchanger for powering warehouse heating systems transformer room ,with control panels, Landis+Gyr E650 meter, MESSINA SVT/R+AC/R medium voltage  ...

Switch cabinet - cooling device, switch cabinet air conditioner, distribution cabinet, heat exchanger spindle cooler-Manufacturer: Harbor, heat exchanger spindle cooler from CNC machining center Santenberg GTC S 2-Type: HPW-10AR-Voltage: 110V 50/60Hz-Dimensions: 250/75/H580 mm-Weight: 5.7 kg ... more information

CNC control, control panel, machining center-Manufacturer: Fanuc, control panel/CNC control from CNC machining center Santenberg GTC S 2-Control: Fanuc Series 18i-TB-Grinding spindle control/balancing: Balance Systems VM25-Transport dimensions: 800/680/H250 mm-Total weight: 48 kg ... more information

Oil drip pan 1080 litres Oil collecting tray with feet made according to RAL RG 616, content 1080 litre, material S235JRG2, painted,. Dimensions: Height 750 mm, length 1200 mm, Width: 1200 mm incl. test certificate Year 2012, unused  ... more information

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, analog input module, sensor/actuator module, connection, electronic modules, PLC module, expansion module-Manufacturer: Fanuc, electronic module extension module from CNC machining center Santenberg GTC S 2-Type: 21I EMIOB00021I-Extension module: Type: A03B-0815-C001 4 pcs.-Dimensions: 545/220/H140 mm-Weight: 3 kg

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, analog input module, sensor/actuator module, connection, electronic module, PLC module, expansion module, plug-in card circuit board, operator panel-Manufacturer: Fanuc, plug-in card circuit board from CNC machining center Santenberg GTC S 2-Type: A20B-2002-052 MES-1A-Extension module: Type: A03B-0815-C001 4 pcs.-Dimensions: 150/110/H30 mm-Weight: 0.2 kg

he Empty container Container Cummins QSV91 or similar genset is available for sale immediately. The floor of the container is very high specs and built to enhance durability in tough conditions. Below are the dimensions for the genset container and air-intake as: Container: 3.5 Meter High 3.5 Meter Wide 12.6 Meter Length Air intake on front: 2.6 meter high 3.3 meter wide 2.9 meter Length Available for sale... The empty container with highly specialised flooring and walls considering the equipment to be installed in there. The container pictures are attached to this advert, as seen. Everything inside the empty container. Please see attached the pictures for the units available for sale. Kindly advise your interest if you would like to get further details feel free to contact us back. For arranging the visit inspe ...

Heating power: 185 kW Heating water inlet temperature: 55 C Heating water outlet temperature: 60 C Heating water volume: 32 m3/h Refrigerant: R 134a Starting current: 147 A Capacity: 2x 25 kg Operating voltage: 400 V Control voltage: 230 volts Operating pressure: 28 bar Displacement: 101 m3/h Power consumption: 43 kW Subject to prior sale - errors possible Ref. No.: E-1165

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog module, analog module, analog output, interface module, communication processor, digital interface balancer-Manufacturer: Balance Systems Balancing Unit B6 from CNC machining center Santenberg GTC S 2-Terminal modules: Type 9SHVM2510NL000 2 pieces-Dimensions: 300/275/H130 mm-Weight: 5.3 kg

Lauber Energy Use Centre for 4 containers. The plant is abandoned due to conversion of the production. We replace our steam engine with a turbine, which is why most of the waste heat is eliminated. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. 4 containers of wood chips/firewood can be connected ( 35m3). Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) The system consists of: Intake hopper for air incl. dust filter Blower unit Heater 370kW Funnel for air flow incl. 4 shut ...

Power supply, converter, converter, power supply unit, Smart-UPS, spare battery, UPS system-Riello: Sentinel Dual UPS UPS system SDH 1000-Connection: 220-240 V/50/60 Hz-Power: 1000 VA/900 W-Dimensions: 425/170/H435 mm-Weight: 37.3 kg ... more information

Servo drive, servo card, output module, CPU card, input processor, power pack, control card, input card, controller, converter, controller, servo module, axis amplifier, DC converter, axis amplifier, velocity control unit, spindle amplifier module-Manufacturer: Fanuc, Spindle Amplifier Module from CNC machining center Santenberg GTC S 2-Type: A06B-6110-H015-Number: 2x servo module available-Price per piece-Dimensions: 285/90/H380 mm-Weight: 4.9 kg/pc.

Servo drive, servo card, output module, CPU card, input processor, power pack, control card, input card, controller, converter, controller, servo module, axis amplifier, DC converter, axis amplifier, velocity control unit, spindle amplifier module-Manufacturer: Fanuc, Spindle Amplifier Module from CNC machining center Santenberg GTC S 2-Type: A06B-6111-H011#550-Number: 2x servo module available-Price per piece-Dimensions: 285/90/H380 mm-Weight: 4.7 kg/pc.

Servo drive, servo card, output module, CPU card, input processor, power pack, control card, input card, controller, converter, controller, servo module, axis amplifier, DC converter, axis amplifier, velocity control unit, spindle amplifier module-Manufacturer: Fanuc, Spindle Amplifier Module from CNC machining center Santenberg GTC S 2-Type: A06B-6114-H207-Number: 2x servo module available-Price per piece-Dimensions: 310/60/H380 mm-Weight: 4.4 kg/pc.

Stock # UG6358 Used cogeneration plant by Caterpillar working on natural gase. Consist of two motors type G3516C, each with power 1.2 MW. Total power 2.4 MW.  ... more information

Refrion Dry Coolers Cooling capacity 530kW at cooling water temp. 40 - 35 degrees C. EC fan control  ... more information