subcategories
(3rd category level)
Manufacturer:
(Category: 101)
Inv. Num. : 6291 Type: MF630/15C Producer: Quaser Generated: 2017 Parameters: Control system: Heidenhain iTNC 640 Number of synchronized axes: 5pcs Minimum vertical spindle speed: 20 1/min Maximum vertical spindle speed: 15000 1/min Travel X-axis: 800 mm Travel Y-axis: 700 mm Travel Z-axis: 610 mm Maximum tool weight: 300 kg Machine height: 2530 mm Machine length: 3710 mm Machine width: 3230 mm Machine weight: 9050 kg Equipment: Workpiece probe Renishaw Jigs Axis X Y Z C A Tools
Catalog No. : 6346 Type: WHN 13 A Producer: TOS Made in: 1980 Characteristic: Control system: MEFI CNC 859 Length of the working table: 1600 mm Width of the working table: 1800 mm Maximum rotary speed of the spindle: 2800 1/min X-Axis travels: 2000 mm Y-Axis travels: 1600 mm Z-Axis travels: 1200 mm Power of the spindle: 38 kW Machine weight: 34.600 kg Replaced ball screws. Measuring each IRC axis separately. Drives separately each XYZ axis.
Catalog No. : 5750 Type: MCFV 1060 Producer: TAJMAC Made in: 2005 Characteristic: Control system: Fanuc Series 18i-MB5 Length of the working table: 1270 mm Width of the working table: 590 mm Maximum table load (evenly distributed): 1350 kg Maximum rotary speed of the spindle: 12000 1/min X-Axis travels: 1016 mm Y-Axis travels: 610 mm Z-Axis travels: 760 mm Equipment: Rotary table Internal cooling 4th axis Workpiece probe MP12 2022: New spindle Chip conveyor High pressure pump Ball bar 2021: X and Y axis laser compensation 2022: GO spindle - new ball screw on X and Y axis - replacement of the rod for holding tools - new bearings - geometry
Inv. Num. : 5479 Type: PC W 200 HA Producer: Å KODA Created: 1987 Parameters: Spindle drive power: 77 kW Minimum spindle speed: 0.8 1/min Maximum spindle speed: 630 1/min Mechanical feed length axis X: 4000 mm Maximum feed speed axis X: 4000 mm/min Maximum feed speed axis Y: 4000 mm/min Maximum feed speed axis Z: 4000 mm/min Cone: ISO 60 Spindle diameter: 200 mm Maximum turning-out depth: 2000 mm Spindle extension: 1600 mm Base size: 6400 x 5100 mm Ride of the stand on the bed: 5000 mm
Control system: HEIDENHAIN iTNC 530 Working table length: 1,350 mm Working table width: 1,300 mm Maximum table load (uniform): 8,000 kg Spindle drive power: 25 kW Maximum vertical spindle speed: 14,000 spinmin Maximum distance between the spindle and the table: 950 mm Maximum feed speed Axis X: 30,000 mm/min Maximum feed speed Axis Y: 30,000 mm/min Maximum feed speed Axis Z: 30,000 mm/min Machine height: 4,300 mm Machine length: 3.550 mm Machine width: 3,810 mm Machine weight: 16,000 kg Accessories: Span-conveyors Full coverage of the workspace
VOORTMAN V630 + HS540 beam drill line was built in the Netherlands. An easy-to-use machine with wide machining capabilities, allows to significantly increase the productivity of any industrial plant by fully automatic drilling, countersinking and threading of metal workpieces. All of this while maintaining low operating costs, high productivity and excellent precision. The VOORTMAN V630/1000A beam drilling machine consists of the following parts: – VOORTMAN V630 drilling unit – PEHAKA HS 540/1100 GBS band saw – roller conveyor The production line uses top-quality components from renowned brands to reduce size deviation tolerances and improve the quality of the final product. These include among others drilling heads with automatic 6-position tool changers for drills for various types of workshop work. During machining, the profile is fed to and from the workstation on a sp ...
AUERBACH AX3 TLF deep hole drilling machine was manufactured by the renowned German company Erste Maschinen Fabrik (ERMAFA Sondermaschinen- und Anlagenbau GmbH) in 2011. Characterised by its high reliability and performance, the AUERBACH AX-3 TLF machine used in the drilling of deep holes with high precision and tolerances in various types of metal, provides excellent optimisation of all aspects of the process and a significant reduction in cycle times. The machining process is fully automatic in 6 axes (X, Z, W, Y, B, A), making it capable of obtaining holes with a maximum diameter of 32 mm and a depth of up to 1700 mm. The AUERBACH AX 3 TLF deep hole machining centre is equipped with, among others, a 1500 x 100 mm interpolated rotary table and a user-friendly HEIDENHAIN iTNC 530 CNC control for programming all parameters of the process. The total weight of the drilling and milling m ...
MORI SEIKI SH-500/40 Horizontal Machining Center was built in Japan in 1999 by MORI SEIKI CO., LTD. The machine is equipped with a numerical control type MORI SEIKI MSC-502. The milling machine has a table size of 500 x 500 mm and processes workpieces weighing up to 500 kg. The travel range of its X, Y, Z axes is 630 x 600 x 650 mm, respectively. The machine spindle rotates at 12,000 revolutions per minute. The milling machine is equipped with a magazine for forty tools with a maximum tool diameter of 150 mm, length 360 mm and a weight of 12 kg. The milling center is offered at a price with different types of holders. Technical parameters of the MORI SEIKI SH-500/40 CNC milling machine - CNC control: MORI SEIKI MSC-502 Travel range: - X axis (table travel length): 630 mm - Y axis (vertical movement of the spindle head): 600 mm - Z axis (cross table movement): 650 mm - distan ...
MORI SEIKI SH-400 Horizontal Machining Center was manufactured in 2000 in Japan by Mori Seiki CO., LTD. The CNC milling machine is equipped with Mori Seiki MSC-501 numerical control. The price of the machine includes various types of frames. Technical data of the MORI SEIKI SH-400 CNC milling machine - CNC control: MORI SEIKI MSC-501 - machine weight: 10100 kg
CNC Vertical Machining Center HERMLE C 50 U With track control Heidenhain iTNC 530 Year of Make: 2006 Travel : X 1000 Y 1100 Z 750 Speed range : 20 – 18,000 rpm continuously variable ( HSK 63) With the following accessories: NC swivel rotary table Ø 700 mm with pallet clamping system 800 x 800 mm (1 pallet) Vertical tool changer with 60 magazine positions ( HSK 63 ) Blowing air through the centre of the spindle Blow-off device IKZ 80 bar with paper belt filter Scraper belt conveyor Chip wagon Coolant Setup External minimum quantity lubrication, system control Sealing air for scales, bed flushing Oil mist extraction, status light Automatic Cabin Door , Automatic Cabin Roof Electronic Heat Compensation iTNC 530 Electr. Manual control module HR 410 3 D Probe Heidenhain BLUM Wz- bruch / Measurement A 2 Rotating transparent window Swarf Spray Gun 4 Pie ...
Table dimensions ( x-y/mm) 600 X 600 Stroke ( X/mm) 710 Stroke ( Y/mm) 550 Stroke ( Z/mm) 500 Type of controll Heidenhain Tnc 430 M Number of spindle per minute 100 - 18000 Tool magazine Yes Number of inserts in the tool magazine 30 Chuck connection Hsk 63 Maximum loading weight ( ton) 0,5 Location Vercelli Italy Machine Conditions Ce Marked Model Ucp 710 Year of made 2000
Control Heidenhain ... TNC 530 Clamping table surface ... 1200x600mm Axis X ... 1020mm Axis Y ... 610mm Axis Z ... 610mm Spindle speed ... 10-12000 rpm Controlled axes... 3 cooling ... 20bar SK 40 Max. workpiece weight ... 500kg Main engine power ... 22kW Rapid traverse ... 40,40,36m/min Magazine spaces ... 30 Machine weight ... 6970kg L x W x H ... 2920x2820x2860mm The machine is in good condition, possible to test under power.
Table dimensions ( x-y/mm) 920 X 435 Stroke ( X/mm) 762 Stroke ( Y/mm) 435 Stroke ( Z/mm) 510 Type of controll Siemens Tool magazine Yes Number of inserts in the tool magazine 30 Features Integrated Position Encoder Location Milan Italy Machine Conditions Ce Marked Model Dnm 400 Ii Year of made 2016
Hurco BMC 4020 with Ultimax 4 controller, built in 2000 Machine runs well and is immediately ready for use. Travels: x-y-z. 1016mm x 508mm x -610mm Speed 8000 1/min, magazine 24 places Tool changer has been repaired and runs very well. Keyboard and trackball and touch screen new. Preparation for Lehmann rotary axis installed. (servo pack and wiring in the control cabinet) Sale free loaded onto truck Visit by appointment with us in 83558 Maitenbeth.
Posmill C 1050 with Yaskawa robot, Year of manufacture 2014, Control Heidenhain iTNC 530, Travel X/Y/Z 1050/530/630 mm, Tool changer 25-speed, Recording ISO 40, Table size 1150 x 560 mm, Spindle speed up to 10,000 rpm, Yaskawa Robot Motoman, IKZ 20 bar, 4 axle, electr. Handwheel Workpiece measuring system,
Specifications: - Machining, drilling, milling, threading of aluminium profiles + steel profiles - Steel – profiles up to 3 mm wall thickness - Working range of the axes approx. - X (longitudinal) 4000 mm - Y (landscape) / Z (vertical) 470 / 420 mm - Max. workpiece dimensions when machining 1 + 2 profile sides Wkz. 60 mm - L 4000 x W 275 x D 200 mm - Max. workpiece dimensions when machining 3 profile sides Wkz L 60 mm - L 4000 x W 137 x D 200 mm - Max. workpiece dimensions when machining 3 profile sides Wkz. 53 mm - L 4000 x W 263 x D 200 mm - Max. workpiece dimensions when machining 3 profile sides Wkz L 53 mm - L 4000 x W 263 x D 200 mm - Tool holder HSK 63 F - Tool changer with 8 tools - Max tool diameter for milling 50 mm - Max. saw blade diameter 180 mm - Max. ...
Type VR 6A Producer Mas Year of manufacture Max. drilling diameter iron/casting 63/80 mm Max. vertical arm adjustment 950 mm Max. motion of milling head on arm 1613 mm Dimensions l x w x h 3240x1300x3900 mm Machine weight 5800 kg Main motor output 5.5 ... more information
Maximum drilling capacity in steel/casting 63/80 mm The maximum drilling diameter in steel 300 mm leadership Maximum distance spindle axis to the leadership mantle 2000 mm Vertical adjustment arm 950 mm spindle speed - The number of stages 16 - Range from 11 to 2000 /min Main engine power of 5.5 kW Total input 8,5 kVA Weight 7100 kg
MATSUURA ES-450HII PC-5 4 Axis Horizontal Machining Center Year of manufacture 2001 Control FANUC 18i – M Machine number 10414639 Travel X – 450 / Y – 400 mm / Z – 400 mm B-Axis 360,000 Equipment: Tool Magazine 61 Spaces Pallet storage for 5 pallets 300 mm x 300 mm and set-up station Spindle SK 40 Speed 50 – 15,000 rpm. NC rotary table as B-axis KNOLL coolant system Cooling system HYFRA Coolant filter system Conveyor Operating Instructions/Documentation Machine data on storage medium All other accessories visible in the photos and video are not included in the scope of delivery, so they are not part of this sale. The scope of delivery only includes the accessories that are expressly listed here, in the order confirmation and invoice. There are three more MATSUURA machining centers available. Sales are preferably made en bloc. EXW D-77866 Rheinau O ...
Description Horizontal machining center Hyundai Kia HS400 X 620 Y 560 Z 650 Dist Table Spindle Nose 150 - 800mm 60 ut ISO40 15000 rpm 22kW max 167N Omlat ut give 75 (140) x 300mm L, max 10kgs Fast 50m/min 30 bar through spindle pallet 400 max load 800kgs Renishaw CNC Fanuc 18i MB Specific Details CNC Fanuc 18i MB X axis 620 mm Y axis 560 mm Z axis 650 mm Table – Pallet dimensions 150 X 800 mm x mm Max load on table 800 kg