- (24)
- Automatics (Lathes) For Bars (7)
- Bench Lathes For Precision Mechanics (25)
- Carousel Turning Machines (Lathes) (52)
- Centre-Drive Turning Machines (1)
- CNC Carousel Turning Machines (25)
- CNC Cycle Turning Machines (46)
- CNC Double Spindel Turning Maschines (Lathes) (13)
- CNC Long Turning Automatics (35)
- CNC Long Turning Machines (27)
- CNC Multiple Spindel Turning Lathes (9)
- CNC Sloping Beds (3)
- CNC Turning Automatics (28)
- CNC Turning Centers (161)
- CNC Turning Machines (427)
- Cutting-Off Machines (8)
- Cycle Lathes (37)
- End Working Machines (1)
- Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes) (265)
- Facing Disks (2)
- Facing Lathes (15)
- Facing Lathes With Tailstock (4)
- Feed Automatics (3)
- Heavy Lathes (28)
- High Precision Lathes (5)
- High Precision Turning Machines (Lathes) (9)
- Hollow Spindle Turning Machines (Lathes) (1)
- Horizontal Turning Centres (19)
- Horizontal Turning Machines (Lathes) (5)
- Longitudinal Turning Machines (Lathes) (7)
- Lunettes (13)
- Multi Spindle Automatics For Bars (14)
- Multi-spindle turn automatics (22)
- NC Universal Turning Machines (Lathes) (1)
- Other Turning Machines (35)
- Pointed Turning Automatics (Lathes) (4)
- Rotating Benches (16)
- Short-Bed Lathes (5)
- Single Spindle Automatics For Bars (7)
- Special Purpose Turning Machines (2)
- Spindle Turning Automatics (Lathes) For Bars (2)
- Thread Turning Machines, External (1)
- Three-Bake-Feed Automatics (1)
- Turning Automatics (13)
- Turning Benches (3)
- Turning Machines (Lathes) (121)
- Turning Machines (Lathes) And Turning Automatics (3)
- Turning Machines (Lathes) For Bars (2)
- Turret Lathes (5)
- Universal Lathes > 800 Mm Diameter (7)
- Universal Lathes Up To 800 Mm Diameter (10)
- Universal Turning Machines (Lathes) (26)
- Vertical Turning Centres (3)
- Vertical Turning Machines (35)
- Vertical Turning Machines With Pick-Up Spindle (3)
- Vertical Turning Machines, Open Gap And Straight-Sided (2)
- Vertikal Turning Machines (Lathes) (40)
- more
- A.I. HEMBRUG (1)
- AB (1)
- abb (3)
- ACCUWAY (3)
- AERO (1)
- AERZENER (1)
- AFM (3)
- AJAX (1)
- Alex Tech (2)
- ALFING (1)
- ALLG (1)
- AMUTIO (1)
- AMUTIO CAZENEUVE (1)
- AMUTIO-CAZENEUVE (2)
- ARAD (2)
- ARAD ELITE (1)
- ARGUS - FLOWSERVE (1)
- ARIX (1)
- AVM (1)
- AVM ANGELINI (5)
- AX SUPER PRECISION (1)
- AYEL-TECH (1)
- BARUFFALDI (1)
- BAUER (2)
- Benzinger (6)
- BERG (1)
- BERNADO (1)
- Bernardo (21)
- Berthiez (3)
- BEZINGER (1)
- BIGLIA (23)
- Binns + Berry (2)
- BISON (1)
- BOEHRINGER (18)
- BOEHRINGER MAZA (1)
- BOLEY (7)
- BORUI (1)
- BOST (1)
- BRAUN (1)
- BRAUN ZERBST (1)
- BREUNING IRCO (1)
- BRIGDEPORT (1)
- BRINKMANN (2)
- BUDAPESTI (1)
- BUFFALO (1)
- BULLERI (1)
- Bulmak (3)
- BULMAK / ZMM (3)
- BUMOTEC (1)
- BÖHRINGER (3)
- BöHRINGER VDF (1)
- CABE (1)
- CAORLE (1)
- CARNAGHI (1)
- CAZENEUVE (35)
- CAZENUEVE (1)
- CELORIA (1)
- Chevalier (4)
- CHIAH CHYUN (1)
- CHIAH CHYUN-MUELLER (1)
- CHIRON (1)
- CHOCIANÓW (1)
- CINCINNATI (1)
- CINCINNATI-MILACRON (1)
- CINNCINATI (1)
- Citizen (28)
- CITIZEN CINCOM (1)
- CKD BLANSKO (5)
- CLOVIS (1)
- CMIDURANGO (1)
- CMT (1)
- CMT MASCHINENBAU (1)
- CMT URSUS/EMCO (1)
- CMZ (17)
- CNC GORBREX (5)
- CNC-TAKANG (1)
- Colchester (58)
- COLOMBO (2)
- COLOMBO + LENNA (1)
- COMBI (1)
- Comev (10)
- CONTUR DIALOG (1)
- CORTINI (1)
- CRAVEN (2)
- CS (1)
- D160 (1)
- Daewoo (11)
- DAEWOO (DOOSAN) (1)
- DAEWOO PUMA (1)
- DAINICHI (1)
- DALIAN (1)
- DANOBAT (1)
- DE BERNARDI (1)
- DE MOOR (1)
- DECKEL MAHO (1)
- DECKEL-MAHO (1)
- DEFUM (1)
- DEMOOR (1)
- DIEDESHEIM (1)
- Dimitrov (2)
- ... more
Manufacturer:
(Category: 102)
used
Lathe Plauert DL 450, fully functional ... more information
New in: 2008
used
Control Heidenhain Plus IT with Turn Plus Turning diameter max. circulation 520 mm Turning length 1175 mm Cross slide at the top with turning/milling spindle as motor spindle, mounting HSK 63A Main / Counter Spindle C-axis Y-axis ±90 mm B-axis ±120° 12-speed turret with driven tools Tool disc magazine 1 x 36-speed Tailstock Conveyor Weight 15 t
used
New in: 1967
used
SKODA SRM heavy duty lathe Turning diameter over bed 1400mm Turning diameter over support 1000mm turning length 11280mm faceplate 1250mm Workpiece weight in the stands max. 20000kg Bezel 395mm Bezel 620mm workpiece weight 16000kg Total power requirement 40kW ... more information
New in: 2020
used
â—‹CＮＣ 　　CINCOM SYSTEM FS-32iB â—‹capacity - work piece ã€€ã€€æœ€å¤§åŠ å·¥å¾„ã€€Ï†20mm ã€€ã€€æœ€å¤§åŠ å·¥é•·ã€€200mm 　　æ£é¢æœ€å¤§ç©´æ˜Žã‘径　φ10mm　最大タップ　M8 　　背é¢æœ€å¤§ç©´æ˜Žã‘　φ8mm　最大タップ　M6 â—‹ Main Axis 　　æ£é¢ä¸»è»¸å›žè»¢æ•°ã€€10000rpm 　　背é¢ä¸»è»¸å›žè»¢æ•°ã€€8000rpm ( rare end ) â—‹ATC 　　21 tools 　　ãã—刃　旋削5本＋milling 4 tools 　　æ£é¢ç©´æ˜Žã‘　4本 　　背é¢ç©´æ˜Žã‘　8本 â—‹motor 　　主軸用　2.2/3.7kw 　　背é¢ç”¨ã€€1.1/1.5kw ○機械ã®å¤§ã㕠　　寸法　幅2540mm＋ãƒãƒƒãƒ—コン719mm×奥行1185mm×高ã•2 152mm 　　é‡é‡ã€€2200kg â—‹Bar feeder 　　オートãƒãƒ¼ã€€Alps　ASR X-20ZCⅡ　 length 3.0m
New in: 1986
used
Machine weight: 20,000 kg Faceplate diameter 1250 mm Number of supports: 1 pcs Dimensions: height 4250 mm width 5630 mm depth of 3550 mm Extras: copying apparatus, turret head on the vertical support Technical condition at the time of sale: Replacement rotary amplifier on thyristor converter. Not operated since 1994 p. Small repair and adjustment of electrical and mechanical parts. The maximum dimensions of a workpiece Height 1150 mm The diameter of 1400 mm Weight 8000 kg
New in: 2004
used
Turning Diameter: 640mm Turning Length: 1,585mm Standard Turning Diameter: 400mm Distance Between Spindles: 1,930mm Max RPM: 4,000 Power Capacity: 36 / 45 KW Max Torque: 600 Nm ... more information
used
Max Turning Diameter (in): 16.14 Max Turning Length (in): 13.78 [23.63, 39.37] Spindle Nose Type: A2-6 [A2-8, A2-11] Speed Range (minâ»Â¹): 50~5,000 [42~4,200, 30~3,000] Standard Power (hp): 30/20 Rapid Traverse X/Z (ipm): 984/1,182 ... more information
used
Max. workpiece diameter: 175 mm Max. workpiece length: 420 mm Max. bar capacity diameter: 65 mm Max. X-axis stroke: 165 mm Max. Y-axis stroke: 80 mm Max. Z-axis stroke: 420 mm ... more information
New in: 2014
used
2 x 12 driven position turrets - 2 x C axis - Y axis in upper turret 100 mm (+/- 50 mm) - Fanuc 31i-B Control - tool eye - high pressure pump - rotating unloader - well tooled - LNS Sprint S2 barfeed with rear magazine. ... more information
New in: 2001
used
Sell a used Monforts KNC 5 Year of construction 2001 Spindle head size 8 Rod passage 70mm Sinumerik 810 D control system with manual turn Center width 1080mm Circulation Ø Face carriage 260mm Circulation Ø max 500mm Speed range 2-2800 1/min Documentation fully available Parat Holder Coolant system Tailstock Conveyor New 3 jaw chuck Centra Machine is fully functional Geometry very good
New in: 2001
used
GENERAL Project No.: 905398 Quantity: 1 pcs. Manufacturer: EMAG Type: VL 3 Control: Fanuc 18i TB Year of construction: 2001/2022 State of condition: Refurbished machine Layers approx.: 2-3 layers DESCRIPTION TURN circulation diameter over bed cover 210 mm chuck diameter 170 mm speed main spindle 7500 1/min power main spindle at ED 10-40/100% 25/16 kW torque main spindle at ED 10-40/100% 134/85 Nm Spindle diameter in the front bearing Main spindle 80 mm Spindle flange size main spindle size 5 (DIN 55026) Axes on the main spindle unit X/Z Travel in X/Y/Z main spindle unit 400/-/200 mm rapid traverse speed in X/Y/Z main spindle unit 60/-/30 m/min Feed force in X/Y/Z main spindle unit 5000/-/5000 N Direct displacement measuring system main spindle unit X/Z Full clamping cylinder on the main spindle Revolver bottom Number of stations/driven by 12/12 Tool ho ...
New in: 1975
used
Conventional Vertical Lathe O-M TMS2-18/40 Made in 1975. Table size: 1800mm Max swing: 4000mm Max turning height: 1500mm Condition Under power. ... more information
New in: 2002
used
CNC Lathe Spinner TC 80L- MC Control Siemens 810 D Year of construction 2002 Spindle passage 80mm C-axis The offer is aimed exclusively at traders within the meaning of §14 BGB ... more information
used
Bar feeder LNS Hydrobar Type HYS 6.36HS-4.4 Year of construction 1990 the holes have the following diameters: 45, 41, 36, 30, 25 ,15,5 The offer is aimed exclusively at traders within the meaning of § 14 BGB No sale to private individuals! ... more information
New in: 1999
used
L + Z Lathe KNUTH 1000 A L + Z Lathe KNUTH Type 1000 A Masch. No. 118 255 Year of construction 1999 Center width 1000 mm max turning diameter over bed 400 mm Tip height above bed 200 mm max turning diameter over support 240 mm Turning diameter without bridge 580 mm Length of bridge: 52 mm Spindle bore 52 mm spindle cone: MK 6 Quill cone: MK 4 Spindle speed 30-1600 rpm. 12 steps Longitudinal feeds 0.04 – 1.06 mm Transverse feed 0.02 – 0.53 mm Tapping (30) 0.45 - 20 mm Tailstock quill 130 mm Power supply 400 volts, 50 Hz, 6.6 kW - 3-axis digital display position indicator - KNUTH, - Spindle speed over 15 gear stages - 3-jaw lathe chuck Ø 250 mm -4 Jaw chuck never used. new - Quick-change steel bracket Multifix size B with 3 inserts - Coolant tank with pump in the machine base - Spindle brake with foot pedal - Foldable chuck protection - Splash guard - Eme ...
used
Tip height: 102 mm Top width: 450 mm Spindle bore: 32 mm Reduction gear Links.-right rotation 2-stage drive Vario speed: 270-3000 rpm Knee circuit Turning diameter over bed: 200 mm Spindle nose: W 20 Tailstock Quill: MK 2 Dimension (Lxwxh): approx. 140 x 56 x 123 cm Weight: approx. 550 kg Accessories available Manual available The machine is located in a clean good condition!
New in: 1959
used
Tip height 102 mm Top width 450 mm Leit.-/ spindle Collets W20 available Rotational speed: approx. 210 3000 rpm Reduction gear Links.-right rotation 2-stage drive L x W x H: CA. 1760 x 595 x 1230 mm Weight: approx. 650 kg ... more information
used
Tip height: 130 mm Top width: 450 mm Rotational speed: approx. 55-3000 rpm Pneumatic clamping system Spindle nose: W 25 Div. W25 collets available Div. holder available BERGER LAHR axis motors Combitec EIP E-500 control Manual control available Coolant system available Machine lamp available Machine feet available Dimension (Lxwxh): approx. 1400 x 560 x 1230 mm Weight: approx. 550 kg The machine is located in a clean good condition!
New in: 1984
used
CNC-heavy duty lathe Kramatorsk 1A660 Year of manufacturing: 1984 Distance between centers: 11.500 mm Turning diameter: -Over bed: 1650 mm -Over cross slide: 1340 mm Work piece weight: max 25 tn Spindle bore: 105 mm Spindle speed range: 0,5 - 250 rpm Cross slide travel: 735 mm Spindle stock pinol travel: 260 mm Threads: -Meter: 1 - 96 mm/r -Whitworth: 20 - 3/8 -Modul thread -D-P thread Size: -Length: 17.100 mm -Width: 2.800 mm -Height: 2.000 mm -Weight: 46,5 tn Control: Bosch M5