saws used for sale

Manufacturer : Kasto Type : Verto A2 Year of construction : 2015 Control : Basic-Control Kasto Location : from the beginning of March 2024 from warehouse Sweden Easy-to-use Basic Control control Frequency-controlled, infinitely variable saw drive Infinitely variable, hydraulic saw feed Two hydraulic horizontal clamping vices Electromotive material feed via ball screw Specifications Cutting range 90° round. :260 mm Cutting range 90° flat (W x H): 320 x 260 mm Cutting range 90° square: 260 x 260 mm Shortest remnant length: 6 mm Smallest saw diameter: 10 mm Band saw dimensions: 3,180 x 27 x 0.9 mm Cutting speeds: 12-120 m/min Material support height: 950 mm Weight. 1,360 kg Dimensions. 2,365 x 2,250 x 1,767 mm (without roller conveyor) Automatic Band Saw with Reduced Volume Other equipment - Automatic zero positioning of the first saw section - Coolant ...

Cap. 200 mm.  ... more information

Description Mossner Record vert. Band saw. The welding machine is defective! Specifications Manufacturer Mossner-Rekord Model SSF-420 Use State  ... more information

Electrical voltage 400 V Frequency 50 Hz N° Phases 3 / 3 Ph Mass 486 Kg Dimensions sheet 2700 x 27 x 0.9  ... more information

Electrical voltage 400 / 440 V Frequency 50 / 60 Hz N° Phases 3 / 3 Ph  ... more information

The ELUMATEC SA 142/36 automatic aluminium cutting saw was manufactured in 2001 by the German brand ELUMATEC. The machine can be used for cutting aluminum profiles and PVC joinery. So far, it has only been used for cutting aluminium profiles. - Surface-specific material feeding (cyclic) via profile lifting system on one level - Single, double or triple feeding via selector switch - Safe material feeding thanks to two horizontal pressure cylinders Cvmmdigqg2 - Large cutting surface for wide profiles Technical parameters of the ELUMATEC SA 142/36 aluminium cutting saw: - saw speed: 2800 rpm. - cutting angle: 90 degrees to 45 degrees at SA 142/36 - cutting angle: 90 degrees at SA 142/36 - power output: 4000 W - Cutting unit feed: adjustable gradually - feed length/stroke : 5 to 730 mm - material transport: transport in step steps, pneumatic - air consumption without sprink ...

Article number: 19-03-036 Manufacturer: Pehaka Good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1976 L x W x H: approx. 1400x800x1900mm Weight: approx. 650kg Saw blade length: approx. 4400-4500mm Saw band width: approx. 6-35mm Max. installation height: approx. 300mm Projection: approx. 600mm Drive power: approx. 3.0kW Accessories  2 pieces of bandsaw blades Other accessories on request Price and other technical data on request

Saw blade diameter: 500 mm profile height: 250 mm profile width: 400 mm jack height: 215 mm jack depth: 185 mm Material stop swivel between 22.5° and 157.5° Jack height can be adjusted by motor with digital display Motor adjustment of the angles with digital display Depth stop motor adjustable with digital display Automatic sawing sequence via control with preselection of the cutting angles Pneumatic material clamps Coolant lubrication

Cutting range round 0°: 150 mm Cutting area square 0°: 150 x 150 mm Cutting area flat 0°: 150 x 165 mm Cutting range round 45°: 115 mm Cutting area flat 45°: 115 x 130 mm Cutting range round 60°: 60 mm Cutting area flat 60°: 70 x 70 mm Working height approx.: 700 mm Band saw blade dimensions: 1735 x 13 x 0.65 mm Cutting speeds : 40 / 80 m/min Motor output power S1 100%: 0.75 kW Voltage : 400 V Machine dimensions : 1200 x 750 x 1250 mm Weight approx.: 85 kg Characteristics: • For cutting profiles, tubes, solid materials made of VA, iron and non-ferrous materials • For miter cuts, the saw bracket can be swivelled by up to 60° • Infinitely variable lowering via hydraulic lowering cylinder • Torsion-free, strongly dimensioned saw arm made of grey cast iron • 2 cutting speeds for optimal cutting results • Robust construction, therefore smooth and vi ...

Max. cutting length: 3000 mm Max. saw blade diameter: 380 mm Automatic positioning of the sawing unit via E 255 control system Cutting range at 90°: 195 x 120 mm Cutting range at 45°: 135 x 120 mm Minimum Quantity Spraying Device Pneumatic material clamps Mitre cuts possible on both sides 2-hand operation

Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. pawl width: 300 mm Max. notch height: 185 mm Max. jack depth: 185 mm Material stop can be swivelled with locking points and digital display Notch height motorized adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps Coolant lubrication

Saw blade diameter vertical: 600 mm Saw blade diameter horizontal: 500 mm Notching width:At 90° processing of profiles up to 300 mmTip mitres up to 30° / profile height max. 280 mmNotching depth:at 90° horizontally up to 185 mm / at 90° vertical up to 230 mmMaterial stop:swivel 30° - 90° - 45° Swivel material stop with latching points and digital display Latch height motorized adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps Coolant lubrication

Automatic Band Saw BOMAR Maxi diameter: Ø 250 mm Hydraulic clamping of the chuck Straight and angular cut Automatic descent Possibility to work manually or auto 2 rotation speeds of the blade Lubricant pump Voltage: 380 V Length: 2000 mm Depth: 1800 mm Total height: 1800 mm Weight: approx 1,5 T

Alternativ Saw KASTO PSB 280 U Blades dimensions: 450 mm x 40 mm x thickness 2 mm Cutting capacity in the round: 280 mm Square cutting capacity: 240 x 240 mm Rectangular cutting capacity: 280 x 160 mm Cutting capacity at 45°: 170 mm Automatic descent 2 speeds rotation Swivel jaws from 0 to 45° Jaws length : 350 mm x Height 150 mm Maxi jaws opening: 310 mm Lubricant pump Voltage: 380 V Dimensions (L x W x H): 1800 x 800 x 1300 mm Weight: approx 1 T

Vertical Band Saw PEHAKA HS 1000 Maxi cutting capacity: Ø 1000 mm Blades dimensions: from 11370 mm to 11470 mm x thickness 1,6 mm Straight cutting  ... more information

Semi automatic Band Saw EISELE THOMAS HTB 350 AO CN Cutting capacity in the round: Ø 260 mm Square cutting capacity: 240 x 240 mm Maxi jaws opening: 310 mm Jaws height: 140 mm Angular cutting Auto clamping of the second vise Auto descent by hydraulic variator Automatic non-functional (machine only work in semi automatic) Voltage: 380 V Length: 2200 mm Depth: 2200 mm Total height in height position: 2000 mm Weight: approx 800 kg

Automatic + Manual Band Saw ULTRA DEMURGER typeRH 360 Maxi travel: 1000 mm Straight cut Capacity in round: Ø 360 mm Capacity in square: 360 mm Automatic feed Hydraulic clamping Electricity and hydraulic revised in 2003 Possibility of blade speed variation (pulley drive on motor) Sliding vice dimensions: W 190 x H 215 mm Stop Sliding vice dimensions: L 385 x H 210 mm Machine delivered with 6 spare blades Lubricant pump Voltage: 380 V Length: 2500 mm Depth: 2400 mm Total height in height position: 2200 mm Weight: approx 2 T

Band Saw MEBA Blades dimensions: L 4270 mm x H 41 mm x Thickness 1,5 mm Maxi square cutting capacity: Ø 440 mm Flat cutting capacity: 700 x 300 mm Jaws width: 380 mm Jaws height: 300 mm Removable jaws at +/- 45° Auto blade descent with hydraulic advance Blade speed adjustment: mechanical variator Delivered with 2 feed tables Lubricant pump Voltage: 380 V Length: 2700 mm Width: 1300 mm Height in closed position: 1500 mm Weight: approx 1,2 T

Year of construction: 2016 Double Miter Saw Manufacturer: ELUMATEC, Type: DG 244-E580/5 E580 Control with automatically swivelling workpiece support, roller conveyor and accessories  ... more information

Stock number: 3831 ALUMINUM SHORTCUT SAW Manufacturer: TRONZADORAS MG, Type: TL 600-90 Machine NO.: 220309, Year of manufacture: 2022 Specifications: Large sawing capacity 230 mm Ø Large sawing capacity 210 x 210 mm 4-ct. Large blade diameter 600 mm Blade speeds 3000 rpm Accessories: Automatic feed. Pusher Autopos 6 Pinon 6000 mm max. 40kg/m Chip suction MG 570 4Kw Length: 1300 mm + 6700 mm, height: 1660 mm, width: 813 mm, weight: 450 kg