subcategories
(3rd category level)
Manufacturer:
(Category: 109)
wire diameter range: a) up to 800 N/mm² = 6,0 - 15,0 mm b) up to 1200 N/mm² = 6,0 - 12,0 mm c) up to 1400 N/mm² = 6,0 - 11,0 mm cutting length: max. 14.000 mm wire feeding speed: 22 - 120 mtr./min. machine is been partly reconditioned and new painted; very good ... more information
Wire rod: 0.1 - 1.3 mm section area: 5 - 70 mm power: max. 400 rpm complete with cooling unit and driven wire reel; good ... more information
wire diameter range: 2,0 - 6,0 mmcutting length: up to 500 mmsuitable for Round- Profil- and Flatwire; ready for operation ... more information
wire diameter: 3,0 - 5,5 mmnail length: 15 - 80 mmoutput: 150/300 St./min.-for steel pins-; very good ... more information
wire diameter range: 1,8 - 3,4 mm nail length: 13 - 80 mm output: 550 nails/min. partly refitted and new painted; very good ... more information
Bushes or rollers with strip width: 3,0 - 23 mmStrip thickness: 0,7 - 1,5 mmInternal bush diameter: 3,5 - 7,5 mmOutput: 270/min.; very good -like new- ... more information
Machine is been partly reconditioned in 2014wire diameter range: 4,0 - 10,0 mmcutting length: up to 3.000 mmwire feeding speed: 90/130 mtr./min.; ready for operation ... more information
wire diameter range: 1,0 - 5,0 mmring diameter range: 100 - 600 mmwire feeding length: max. 2.000 mmoutput: 10 - 120 pcs./min.; very good ... more information
working width: 2.000 mmnumber of line wires: max. 16distance of cross wires: 6\", 12\", 18\", 24\" od. 36\"distance of length wires: 1/2\" to 1/2\"wire diam. length wire: 2,5 - 3,25 mmwire diam. edge wire: max. 4,0 mmwire diam. cross wire: max. 3,25 mmwire diam. knot wire: max. 3,25 mm; ready for operation
wire diameter range: 2,5 - 6,0 mmwire feeding length: unlimitedwire feeding speed: up to 36 mtr./minangle of bending: 0 - 340°; ready for operation ... more information
wire diameter range: 1,2 - 2,8mmmesh width: 20 - 70 mmworking width: max. 2.000 mmoutput: max. 170 m²/Stunde; good ... more information
Loading capacity: max. 300 Kg.Coil outsite diam.: max. 1.000 mm Coil inside diam. 240 - 560 mmCoil width: max. 180 mm; good ... more information
1 duck air tank (approx. 1500 ltr.), built: approx. 2014 1 compressed air refrigerant dryer (Boge); Year: approx. 2014 1 oil and water separator ... more information
REHEAT FURNACE Type: Walking Beam Incoming Billet: 160 x 160 mm x 8.300 – 12.000 mm Charge: Hot and Cold Discharging Temperature: 1150 Degr. Nominal Production 90 Ton/Hr Fuel: Natural Gas (LNG) Furnace inside dimensions: L x W 12.500 x 12.800 mm REBAR ROLLING MILL: Type: Housingless Stands Roughing Mill: 6 Stands Intermediate Mill: 6 Stands Finishing Mill: 6 Stands Horiz. Stands # 1,3,5,7,9,11,13,15,17 Vert. Stands # 2,4,6,8,10,12,14 Horiz./Vert Stands #16 and 18 CROP SHEAR No. 1 Head & Tail Cropping, Emergency Chopping Type: Crank Shear- Blade width 200 mm CROP SHEAR No. 2 Head & Tail Cropping, Emergency Chopping No. of Blades: 4- Blade width 180 mm DIVIDING SHEAR Cutting to multiple lengths COLD SHEAR Cutting to final length Shear type; CMC 0630 0950 No. of Blades: 2- Blade width 900 mm Product Length: 6-12 Meter (Standard) ...
Slab Caster Main Data • Manufacturer: Concast-Sumitomo • Number of Strands: 1 • Machine Radius: 8m • Number of Segments: 7 • Mould Size: 760 -1060mm (not adjustable when casting) • Slab Thickness: 160mm • Oscillator: Mechanical • Straightening: Multipoint • Cooling: Single Zone • Casting Speed: 1.7 m/min • Capacity: 650 kt/y • Tundish Weighing: Yes • Tundish Equipment: Stopper Rod, Submerged Entry Nozzle • Dummy Bar: Bottom Entry, Linkage Design • Slab Discharge: Propane Gas Torch Cutting • Breakout Detection: Yes. • Commissioned in 1992. • It has been mothballed since 2013.
Manufacturer: Blaw Knox Revamp: Clecim (1995) Configuration: 22.5”x 53 x 48”4Hi 5 Stand TCM Stand 1 Power: 1500 HP Stand 2 & 3 Power: 1750 HP Stand 4 & 5 Power: 2413 HP Main Sensors: 3 X Ray Gages Flat meter roll HGC: Long Stroke Cylinders in all Stands Work Roll Bending: Positive and Negative WRB available just in Stands 4 and 5 Actuators for Flatness Control: WRB and multizone WR coolant Stand 5 Strip width range: 600 - 1060mm Strip thickness range: 0.17 – 1.9mm Maximum Speed: 790 m/min Coil weight: Max 18.8 MT Capacity: 320.000 MT per year Crew: 6 Operators + 1 Crane Operator
Manufacturer: Bliss Revamp: Clecim (1994) Configuration: 19”x53”x48” 1 Stand 4Hi TMM Main Equipments: 1 Uncoiler Entry Bridle (Two Rolls 20”) Anti- crimping roll Work Roll Bending Exit Shear Exit Bridle (Two Rolls 20”) Electrostatic oiler (both sides) Tension reel HGC Strip width range: 600 – 1060 mm Strip thickness range: 0.17 – 1.9 mm Maximum speed: 610 m/min Coil weight: Max 18.8 mt Inner ⌀ at exit: 508 Capacity: 300.000 MT per year Crew: 3 Operators
Manufacturer: Fata Production Machinery (1995) Main Equipment: 2 pay off reels Entry Lap Welder (Taylor Winfield) Vertical Accumulator High Pressure Spray Cleaning Section Electrolyte Cleaning Section Brushing Cleaning Section Rinse Section Vertical Annealing Furnace (Selas) Flying Exit Shear 2 Tension Reels Line Capacity: 60.000 MT/year Maximum Process Section Speed: 113m/min Maximum Entry Section Speed: 136 m/min Maximum Strip Thickness: 0.28 mm Minimum Strip Thickness: 0.17 mm Maximum Strip Width: 1000 mm Minimum Strop Width: 700 mm Maximum Coil Weight: 18 MT Crew: 4 Operators
Meltshop Consists of: 1. 70 Ton EAF (Electric Arc Furnace) • revamped in 2009 by SMS-CONCAST; • Type AC, Shell Type EBT, diam. 5.400 mm; • Tap weight 63 Ton; • Tap-to-Tap-Time 42 Min; • 100% Scrap Charge; Electrode diam. 550 mm; • Electrode Regulation; • Upper Shell Water-Cooled Panels (Steel + Cu); • Arms design Conductive (copper cladded); • Scrap charge with 3 buckets 2. 65 Ton LF (Ladle Furnace) TAGLIAFERRI”; Tap Time 42 Min. 3. MATERIAL HANDLING SYSTEM, Conveyors and Hoppers 4. CONTINUOUS BILLET CASTER STS” revamped in 2008; • 4-Strands; • 5 meter Radius; • Billets 130 x 130 mm; • Automatic start and mould level control; • Oscillation with AC motors and variable oscillation frequency; • Water automation of primary and secondary circuits; • Heavy Duty Straighteners; ...
Tunnel Type Annealing Furnace Mioba Mfg: Mioba Year of Mfg. 2008 Temperature 450 – 950 C Fuel: Natural Gas 15 Zones with a total of 144 Burners Plate thickness 3-120 mm Plate width 700 – 3.800 mm Plate length 16.500 mm Max Plate with thickness of 40 mm: 3200 x 12.000 mm Max Plate with thickness of 8 mm: 2500 x 10.000 mm Special roll load 2.260 kg/M 7 Conveyor Roll Sections; total 177 centrifugal casted rolls Speed 0,25 – 25 M/Min. Furnace Length 80 Meter; inside width 3900 mm