Manufacturer:
(Category: 1300)
We have 3 cranes for sale. 2x column edwing crane (250kg payload of the brand ABUS) and 1x wall swivel crane (200kg payload of the brand ABUS). The cranes are in a top condition and were mounted only briefly, all documents are completely available. ... more information
Glass Heating Equipment Furnace GT1411 Equipment application. This special equipment is used for heating homogenously the flat glass and cooling it thereafter, is involved in the glass deep processing machinery. The suitable working glass is clear float glass. Power supply requirement and total weight of equipment. This kind of equipment requires a 3-phase-5-line AC power supply of 380V and total installed power of it is about 250kW. Total weight is about 10 tons. Constitution of Glass Heating Equipment. Computer, control cabinet, power regulation cabinet, loading table, heating section, coating section, annealing section, unloading table. The Furnace was in good operational condition when it was dismantled in 2016. The unit is located in a warehouse in Finland
Infeed and Outfeed roller conveyor transport system for material lengths 2.5-14m Entrance dimensions- 2100 x 600mm The machine can process a plate of 2000mm wide and min. 5mm thickness Transport weight of max 1000 kgm Number of Turbines- 6 Turbines of C-380 11 kW Turbine Power Average speed at BSa 2 12- 1-1.5 mmin Abrasive hopper with screw conveyor 2.2 kW Abrasive used- Round low carbon sheet shot or cut wire Buck elevator with a 5.5 KW gear motor and a broken belt detection sensor Machine with Brush blow off plant Machine equipped with screw conveyor Automatic height adjustment for the brush Automatic adjustment for the 4 outer turbines
The color shading in hardware consisting of automatic Auricolor SO tinting machine, large quantities of pasta to administer two LV-Dosing units, PC-based control unit, as well as equipment for intersections between lines. Shading equipment is made in accordance with the standards EN 50014 and EN 50016 and meets the explosion classification Eex p II T3. (The device is equipped with a fan, supply and exhaust pipes and pressure sensor to achieve a permanent vacuum supply to the pipe and well-ventilated.) 1 pack of Tinting Station LV-S18519 -contains 10 pieces 20-liter and 10 liter stainless steel tanks for 15 -the pump return 0.8 litres/min -Automatic nozzle shut-off -ohjauchoiceroniikka SA801, SA903 and SA704 2 x LV-Dosing units with frame structure -tank capacity 150 litres -pasta HL4625, 0.37 kW pump VIKING – approx. 5 l/min, Eex rated -Blade mixer helical motor, inverter ...
Belt conveyor 150x420cm This industrial conveyor features a robust belt with a width of 150 cm and a length of 420 cm, making it ideal for large-scale material handling operations. It is perfect for use in sectors such as manufacturing, logistics, and warehousing, If you need more specific details, feel free to ask!
Belt conveyor 150x420cm This industrial conveyor features a robust belt with a width of 150 cm and a length of 330 cm, making it ideal for large-scale material handling operations. It is perfect for use in sectors such as manufacturing, logistics, and warehousing, where efficient and reliable transportation of goods is essential. If you need more specific details, feel free to ask!
Inv. Num. : 7519 Type: IM-6225 Producer: KEYENCE Created: 2017 Parameters: Axis X: 100 mm Max. weight of the part: 2 kg Weight: 50 kg Measurement of measurements within 10 seconds ... more information
Inv. Num. : 7060 Type: Vaiocs-1 Producer: EMO Created: 1998 Parameters: Control system: SIEMENS SIMATIC Tank dimensions: 530 x 320 x 200 mm Machine dimensions: 4950 x 4170 x 2310 mm ... more information
Inv. Num. : 7403 Type: Mini Producer: Matrix Created: 2019 Parameters: Cabinet dimensions: 860 x 581 x 800 mm Equipment: Emergency power supply Scanner ... more information
Inv. Num. : 7039 Type:- Producer: ONI Created: 2010 Parameters: Cooling capacity: 250 kW Equipment: Outdoor Cooling Tower ... more information
Inv. Num. : 6932 Type: Harrier Producer: Svecia Created: 1993 Parameters: In good technical condition. ... more information
Inv. Num. : 5987 Type: POS-20 Producer: PPP IDEAPRO Created: 2021 Parameters: Power consumption: 2.2 kW Required exhaust air volume: 5000 m³/h Power: 20 t/h Device operating temperature: 5 C Current Conditions: 3/N/PE 400V 50Hz Weight: 1350 kg Rotary screens are used to separate contaminants from various loose dry and wet free-flowing materials.
Inv. Num. : 6592 Type: Producer: LISEC Generated: Parameters: The machine is in good technical condition. It is used as a sealant for the edges of insulating glass. ... more information
Inv. Num. : 6876 Type: GSH 500/1000 Producer: Zerma Created: 2013 Parameters: Hopper inlet in mm: 985x590 Dimensions of the rotor: Diameter in mm: 500 Width in mm: 1000 Rotor version F5 5-leg rotors Rotor blades: Number of rotor blade rows: 5 Number of rotor blades: 5x2 Number of stator blades: 3 Rotor speed (50 Hz): Rpm 528 Dimensions in the attached file Drive motor: in kW: 75 Trigger drive in kW: 11 Opening device: hydraulic Weight of the machine: in kg approx. 3500 Electrical data: the machine is still fully functional - connected to the electrical installation Accessories: complete second knife set knife adjuster
Inv. Num. : 6961 Type: SBS 1030 Producer: Hitema Created: 2018 Parameters: Radiator: R410A Number of compressors: 9 pieces Capacity: 1 MW Length: 8850 mm Width: 2250 mm Height: 2500 mm Weight: 7200 kg Equipment: 2x connection flanges ... more information
Inv. Num. : 6127 Producer: Camfil Created: 2017 Parameters: Filter included. ... more information
Inv. Num. : 6026 Type: NA K-3600 Producer: ESTA Created: 2012 Parameters: Supply voltage: 400 V Air flow rate: 3125 m³/h Current consumption: 10.9 A Machine dimensions: 950x950x3510 mm Machine weight: 510 kg ... more information
Inv. Num. : 6943 Type: WIR/G BOX Producer: Summa Created: 2007 Parameters: Machine weight: 2850 kg In good technical condition. ... more information
Inv. Num. : 6824 Type: DCE DEPRO 16 Producer: Donaldson Created: 2005 Parameters: Number of filter elements: 16 Filter Area: 282.4 m2 Machine dimensions: 3205 x 2100 x 1500 mm ... more information
Inv. Num. : 6900 Type:- Producer: Gema ITW Generated:- Parameters: Weight: 1200 kg The center consists of the following parts: Manipulator 2x (working height 2100mm) Automatic guns 6x Peristatic pump under cyclone Control for 6 automatic guns Switchboard ... more information