other machines and plants used for sale

Vacuum sweeper, ride-on sweeper, place sweeper, indoor sweeper Hako Jonas 1200E with high emptying. Very manoeuvrable machine. A video of the running machine can be sent on request. Sweeping width approx. 115cm Travel speed approx. 8km/h Electric traction drive 4.3kW Climbing ability approx. 16% Battery 24V/420Ah, from October 2016 Theoretical area output 9200 sqm/h Side brush hydraulically driven Waste container 130 litres with hydraulic high discharge up to approx. 140cm Charger Hako Horn Operating instructions CE mark Minor areas repainted Dimensions approx. 2000 x 1150 x 1450mm (LxWxH). Weight: approx. 1100kg The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

YOM: 1997 SHIP’S PARTICULARS: NAME: M/V HHIC-F1 HOME PORT: Manila GROSS TONS: 1380.00 G/T NET TONS: 414 Tons LOA: 67.26 Meters TYPE OF SHIP: ROLL ON-ROLL OFF TRADING: COASTWISE WITHIN SUBIC BAY ONLY TYPE OF SERVICE: COMPANY USE - SERVICE BOAT ONLY MAIN ENGINE: CUMMINS x 2 HORSE POWER: 850 x 2 SERVICE SPEED: 8.5-11 kts

KWANDONG”(2x) DOOSAN 746 kW each (2006) Gross/Net tonnage 56/38; L X B X D; 23.5 x 4.80 x 2.05 M Ship name: HHIC-2 Port of registry: Philippine Subic Delivery day: 2006.12 Gross Tonnage: 40 Tons Class: Korea Society of Ship Inspection & Technology Capacity: 60  ... more information

CEMENT PLANT BATCHING PLANT CONC. BATCH PLANT 210M3/HR-200KW BP210CMPH (Type I Portland Cement shall be used) Make: Hosan Engineering Co.,Ltd.Edit Make Model: HSBP-210MS Cement Plant control panel Silo tank- 2 units compressor water tank - 2 units Cement mixer Crusher plant Crusher 1 conveyor - 3 units crusher w/ wheels control panel Crusher 2 conveyor - 4 units crusher w/ wheels Control panel Concrete Hollow Block Plant Maker: Harex Eng’g Co. Ltd. Model: H212 mixer conveyor - 2 units Hollow block molder/press control panel Capacity: 210 m/ Hr Make: Hosan Engineering Co.,Ltd. Model: HSBP-210MS Capacity: 210 m/ Hr

BLASTING & PAINTING SYSTEM DMK Co. CONSISTING OF: Air Blast Units, Vacuum Recovery System, Silo Tank. Dust Collector, Bucket Elevator, Rotary Separator, Storage Tank, Chute Hopper, Vacuum Recovery, Collection Tank, Ventilation System; MAIN CHARACTERISTICS: SHOP B (2008/2009); DMK Co.; This system consists of blasting, conveying, restoring, and impinging facility; Room size: W: 50.000 x L:50.000 x H: 17.000; 16 Nozzles, cap 32 ton/hr; Turbines 1509 KW; Abrasive: Steel Grit 0,5mm -1,0mm; Initial Charge Grit: 300 Ton; PAINTING SHOP; Room size: W: 50.000 x L:50.000 x H: 17.000; Dry filtering method; Motor 960KW BLASTING SHOP Ventilation System Dehumidifier (YDHM-CDH-15,000-100) - 1 Unit Fan and blower 120hp - 2 Units per exhaust pipe - 4 units total Exhaust pipe for 120hp fan- 2 units Fan and blower 40hp - 1 Unit Exhaust pipe for 40hp fan - 1 unit Dust Collector Ma ...

System Components: ​ Control Panels (in control room) Washing Unit - 1 set Control Panel Centrifugal Ventilator - 22KW Booster Pump System - 15HP Pre-Heater - 780,000Kcal/hr - 1 set Control Panel Shot Blast Machine - 1 set Control Panel Bucket Elevator - 2 sets Air Receiver Tank - 3cu.m Dust Collector - 1000cu.m/min Dust Collection Buckets Water Paint Booth - 1 set Control Panel Air Motor - 100PSI - 3 units Air Diaphragm Pump - 1 unit Mixing Bucket - 2 units Paint mixing tools and jigs Activated Carbon Tower - 400cu.m/min 1 set Dry Oven - 300,000Kcal/hr Control Panel Marking Unit - 1 set Control Panel Rectifier IN/OUT Conveyor - 4.6MW x 230.95ML Control Panel ​ Accessories/other items included: Portable Vacuum Recovery - 1 unit Fan - 11KW; 3P; 440V; 60Hz Exhaust Fan - 1,646W; 220V CO2 Mag Welders - ProPAC600A - 3 units Gouging Machine - LH ...

Brand New UBE Squeeze Casting Machine Still in crates never installed. Specifications: Make: UBE Model: VSC 700 YOM: 2016 700 metric ton Vertical Cold chamber/High-pressure Squeeze Cast machine Fully Loaded Daylight 1.350 mm Die Closing force 7.000 KN ( 17.5 MPA) Column Internal Dimensions ( Vertical x Horizontal) 940 x 770 mm Column Diameter 180 mm Die Stroke 750 mm Die opening Force 352 KN ( 17.5 MPA) Injection Force ( Max-Min) 999 to 480 KN Injection Stroke ( Including Docking Stroke) 872 mm Sleeve Docking Stroke 170 mm Plunger Tip Diameter ( outer tip) 135 mm Plunger Tip Diameter ( Inner Tip) 60 mm Injection Position Machine Center Injection Speed Max. 110 mm/ sec Ejection Force 196 KN (17.5 MPA) Ejection Stroke 40 mm Distance from Die Mounting surface to Ejection Plate 190 mm Number of Valves 1 moveable and 2 fixed Motor for Hydraulic pump 480V ...

ZINCALUM LINE FATA PRODUCTION MACHINERY Manufacturer: FATA PRODUCTION MACHINERY YOM: 1990 Main Equipment: 2 Uncoilers Entry lap welder (Taylor Winfield) 6 Strands Horizontal Entry Accumulator Horizontal Annealing Furnace (Non Ox Heating Section – Radiant Tube Soaking Section: 1 Jet Cooling –Sow Down Cooling Section, Down Chute with electrical heaters AJAX Pre-melt Pot (7 MT) – heated by Two 300 KW channel type inductors AJAX Coating Pot (60 MT) - heated by Four 300 KW channel type inductors. 3roll type Rig. KHOLER Air knives Coating thickness measuring (DMC) 6 Hi Leveller Chemical treatment (Inmersion Tank) Oiler Flying Shear 2 Tension Reels with edge control Strip width range 610 – 1220 mm Strip thickness range 0.30 – 0.85 mm Coil weight entry zone Max 18 MT Coil weight delivery zone Max 9 MT Maximum speed 120 m/min ZNAL  ...

Yom: 2011 Elevating transporter 700 Ton KAMAG U1409-22H HS8E (2011) L/C No.: 5636ILS110510227 Package No.: 01/04 Gross/Net Wt.: 130,000Kg / 130,000Kg Dimension: 24,000 x 7,000 x 1,600 Weight 130,00 Make KAMAG Serial 20102227 Year 2011 Capacity 700  ... more information

SEKWANG Shot Machinery Co. Ltd SKHSS-4600 PRE-TREATMENT SYSTEM (2006) Including: -Main Pre-treatment system -Main control panels -Conveyor -Compressor -Dust and Fume Collector -Pre Heater -Shot blasting -Vacuum Recovery -Welding Machine -Blower -Mixing room Including an assortment of spare parts : Bearings Chain Belts Manganese Filter Sacks, etc. Make SEKWANG Shot Machinery Co. Ltd Model SKHSS-4600 Year 2006

RUDDER TRANSPORTER HYUNDAI HYDRAULIC CO. LTD Hyundai Hydraulic Co. Ltd. Rudder Transporter (2009) Size: 6410 x 7220 x 6995h Capacity: 200Tons Weight: 76.5Tons Frame up/down Capacity: 100T x 4set Stroke: 1500mm Speed: 180mm/min Driving Driver: Hydraulic motor Swing: Manual 5, 15, 30, 45, 90 deg. Speed: 1~6 M/min Working table Capacity: Pushing: 44T x 2 set Pulling: 28T x 2 set Stroke: 500mm x 2 set Working Table Sliding Capacity: 50Tons Stroke: 1300mm x 2step x 2set Table size: 1900 x 5650 mm Rudder Clamping Capacity: 65Ton x 4set Stroke: 650mm Hydraulic Pump type: Tanbem Gear Pressure: 210Kg/sq.cm Tank: 400L x 2set Hose: Connect type Electric Main: AC440V x 3P x 60Hz Control: AC220V x 1P x 60Hz Weight: 76,50 Capacity: 200 Make Hyundai Hydrau ...

2684 kW ‘’SAMKWANG’’ (2010) 2 CUMMINS Engines 1342 kW each; Gross/Net tonnage 314/94; L X B X D: 30.59 x 9.40 x 4.20 M Hull Material: Steel Draft: 3.627 Meter Fuel Capacity: 91,504 L Maximum Speed: 13 Knots Cruising Speed 11 Knots Engine Horsepower: 1,800 HP each Engine Cycle: 4 SN: 33180913/33180861 Auxiliary Engine: 2 Emergency Generator: 1 Model: Hull No. SKSB188 Capacity: 10 crews Make SAMKWANG SHIPBUILDING & ENG'G. Serial 00-0000778 Year 2010

Unused and not yet fully assembled two-chamber industrial washing machine, is offered very far below original price! Technical data according to manufacturer's specifications: Dimensions Width = 3278 mm Height = 3350 mm Depth = 3924 mm Weights Total weight = 6500 kg Ab. Gross batch mass = 500 kg Required floor load capacity = 1500 kg/m² Washing medium Operating medium = demineralized water Water connection = 4 bar, 3/4", cold Working temperature range = 10 -70°C, adjustable Flood pumps = 2 centrifugal pumps, flow rate per pump approx. 2 mn³/min, connected load per 4 kW Water Quantity Washing Process Chamber 1 = 3.9 m³ Water level measured from above Water level chamber 1 = max. 250mm, nominal 100-200 mm, min. 50 mm Heating Heating basin = 10 cartridge heaters, electric Total connected load = 85 kW Nominal voltage = 3 x 400 V AC~ PEN Control volta ...

Nilfisk T30S, item number 4030600083 3.0 KW, 400 V, 50 Hz, 2840 rpm, 3 phases, 6.6 A, cos phi 0.90, Iso F, S1, IP55 Weight 103 kg, container volume 100 liters Vacuum -220 mbar, 130 m³/h Overpressure 278 mbar, 120 m³/h Year of construction 2011  ... more information

Angle gearboxes / gearboxes NOSEN type. RN-4 M-I-LR-1:1 T shape / 1 shaft input - 2 wave outputs -Shaft diameter 19 mm -The ratio of i = 1:1 -Speed max 1500 rpm -Weight 10 kg -Max. Of torque at 1500 rpm: 31.9 NM used from inventory.  ... more information

Angle gearboxes / gearboxes NOSEN type. RN-6 M-I-LR-1/1 T shape / 1 shaft input, 2 outputs of waves -Shaft diameter 25 mm -The ratio of i = 1:1 -Speed max 1500 rpm -Weight 23 kg -Max. Of torque at 1500 rpm: 96 NM  ... more information

1 post PILZ safety relays, a total of 46 units, consisting of: 1.Pilz PNOZ1 (for emergency stop and protection doors), ID 475695: 5 piece 2.Pilz PNOZ (for emergency stop and protection doors), tag 474695: 5 piece 3.Pilz PNOZ 5(NOT-AUS-Schaltgerät), tag 474590: 1 piece 4.Pilz PNOZ 8 (for emergency stop and protection doors), tag 474760: 1 piece 5.Pilz PNOZ X 2.1 (for emergency stop and protection doors), tag 774306: 1 piece 6.PILZ PNOZ X 2 (for emergency stop and protection doors), tag 774303: 1 piece 7.Pilz PZE 9 (contact expander module), tag 774150: 5 piece 8.Pilz PZE X4P (contact expander module), ID 777585: 1 piece 9.Pilz t & a 5V (guard door monitoring), tag 474965: 1 piece 10.Pilz PNOZ X 7 (for emergency stop), tag 774059: 1 piece 11.PILZ PNOZ X8P, tag 777760: 5 pieces, (for emergency stop, safety doors and light barriers) 12.Pilz PNOZ X3P, ident 777310:  ...

Used Hydropneumatic Press / Assembly Press - Pressing force 10 KN (1 to) - Used hydropneumatic cylinder make TOX - Pneumatic two-hand control - Portal frame aluminum profile 90 90 mm - Machine table made of aluminum profiles and multiplex plate 700 700 mm - Total weight approx. 50 kg Suitable as an assembly press for insezing components. With x- and y-adjustment alignable vice for die diameters up to 80 mm. Or for small punching or embossing tools. All tools or vices are quickly changed through the groove system.

Test press for single-axial pressure tests from 0 to 10 KN (0 to 1,000 KG) Purpose: Test press for single-axial pressure tests from 0 to 10 KN (0 to 1,000 KG / 10 KN maximum load). Without distance measurement. Manual lifting spindle press - Static pressing force 5 KN (0.5 to) - Portable, stable press frame made of polyamide PA 6G - Manual spindle stroke gearbox with spindle 20 mm, incline 5 mm - With handwheel diameter 120 mm and handle - Gearbox reduction 1: 10, per handwheel revolution 0.5 mm spindle path - This requires only very low hand force. - Table size 235 195 mm - Light width 190 mm - Stamp size diameter 70 mm - With 4 holes 8 mm for fixing a larger stamp plate - Very easy to operate by spindle and worm gearbox - Total weight approx. 25 kg Force measuring device: Weighing module with shear rod load cell for nominal load 1,100 kg. ...

Ball-lock pins d = 10 mm Wearing length 50 mm Stainless steel with 2 balls 40 pieces in stock  ... more information