injection moulding machines used for sale

We are a company dealing with international trade in used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Offered: Arburg Allrounder 220S 150-60 Clamping force: 15 t Production year: 1999 Injection weight: 14 (PS) g Injection unit: .../60 Screw diameter: 15 mm Specific injection pressure: 2330 bar Injection volume: 15 ccm Injection weight: 14 (PS) g Pump motor power: 5.5 kW Tool closure system: 150/... Clamping force: 15 t Distance between columns: 220 x 220 mm Opening distance: 275 mm Maximum plate distance: 425mm General data: Total installed power: 11 kW Oil tank capacity: 120 l Net price given. We invite you to our other auctions europnet.olx.pl, where you will find other peripherals and injection machines. www.europnet.eu

We are a company dealing with international trade in used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Offered: Arburg Allrounder 270S 350-60 Clamping force: 35 t Production year: 1999 Injection weight: 17 (PS) g Injection unit: .../60 Screw diameter: 18 mm Specific injection pressure: 2500 bar Injection volume: 20 ccm Injection weight: 17 (PS) g L/D ratio of screw: 24.5 Tool closure system: 350/... Clamping force: 35 t Distance between columns: 270 x 270 mm Ejector force: 30 kN Opening distance: 350 mm Maximum plate distance: 525mm Ejector stroke: 220 mm General data: Total installed power: 12.6 kW Oil tank capacity: 120 l Net price given. We invite you to our other auctions europnet.olx.pl, where you will find other periphera ...

ARBURG 200 TON WITH ROBOT WORKING HOURS ARE PRESENT ON THE PHOTOS YEAR : 1999 TECHNICAL DATA: EUROMAP SIZE: 2000-675 CLAMPING FORCE: 2000KN SCREW 50mm closing force: 90 kn OPENING STROKE MAX 650mm I EXCELENT WORKING CONDITION, MACHINE IS WORKING DAILY PRODUCTION MACHINE IS AWAILIBLE IMEDIATELY WE ORGANIZE DISMANTLING LOADING AND TRANSPORT TO THE CUSTOMER

ARBURG 270 S 150-60 U ALLROUNDER MACHINE WAS FULLY SERVICED NOT LONG AGO WITH NEW SCREW TECNICAL DATA IN LIST -PHOTO EUROMAP 150-60  ... more information

KRAUSS MAFFEI KM 125-520C1 (1998) Clamping force: 1250 kN Mold opening force: 70 kN Traversing force opening/closing platen: 35/28 kN Clamping platen (hxv): 745 x 770 mm. Clear width (hxv): 470 x 470 mm. Mold opening stroke: 600 mm. Mold installation height min: 300 mm. Maximum daylight: 900 mm. Ejector stroke: 150 mm. Ejector force forward/back: 10 kN Injection unit: SP520 Screw diameter: 45 Ls/D Ratio: 20 Injection pressure: 1878 bar. Swept volume: 275 cm3 Shot weight PS: 250 gr. Injection flow: 159 cm3/s Screw speed. Standard/ZE: 307/391 1/min Plasticizing flow: 31/40 Pump motor rated output: 18.5 kW Installed heating capacity: 13 kW Control zones, barrel heating: 5 Dry cycles: 1900 (Euromap 6) Oil filling: 345 l. Dimensions: Net weight with control cabinet: 6.000kg Length x Width x Height: 4.48 x 1.51 x 2.19 m. Max mold weight: 1485 kg. Plasticizing u ...

KRAUSS MAFFEI KM150-1000C1 (2000). Clamping force: 1500kN Mold opening force: 86 kN Traversing force opening/closing platen: 45/34 kN Clamping platen (hxv): 780 x 790 mm. Clear width (hxv): 500 x 500 mm. Mold opening stroke: 600 mm. Mold installation height min: 300 mm. Maximum daylight: 900 mm. Ejector stroke: 150 mm. Ejector force forward/back: 22/10 kN Injection unit: SP1000 Screw diameter: 55 Ls/D Ratio: 20 Injection pressure: 1904 bar. Swept volume: 532 cm3 Shot weight PS: 476 gr. Injection flow: 197 cm3/s Screw speed. Standard/ZE: 194/272 1/min Plasticizing flow: 35/49 Nozzle contact force: 110 kN Pump motor rated output: 30 kW Installed heating capacity: 19 kW Control zones, barrel heating: 5 Dry cycles: 1800 (Euromap 6) Oil filling: 345 l. Dimensions: Net weight with control cabinet: 7600 kg Length x Width x Height: 4.99 x 1.51 x 2.19 m. Max mold  ...

KRAUSS MAFFEI KM200-1400C1 (2001) MC4 control Clamping force: 2000 kN Mold opening force: 101 kN Traversing force opening/closing platen: 42 kN Clamping platen (hxv): 915 x 915 mm. Clear width (hxv): 560 x 560 mm. Mold opening stroke: 700 mm. Mold installation height min: 350 mm. Maximum daylight: 1050 mm. Ejector stroke: 200 mm. Ejector force forward/back: 28 kN Injection unit: SP51400 Screw diameter: 60 Ls/D Ratio: 21 Injection pressure: 2000 bar. Swept volume: 679 cm3 Shot weight PS: 618 gr. Injection flow: 325 cm3/s Screw speed. Standard/ZE: 259/368 1/min Plasticizing flow: 58/83 Nozzle contact force: 110 kN Pump motor rated output: 45 kW Installed heating capacity: 23 kW Control zones, barrel heating: 5 Dry cycles: 1400 (Euromap 6) Oil filling: 525 l. Dimensions: Net weight with control cabinet: 10.500kg Length x Width x Height: 5.69 x 1.90 x 2.24 m.  ...

KRAUSS MAFFEI KM250-1000C1 (1998) Clamping force: 2500 kN Mold opening force: 160 kN Traversing force opening/closing platen: 86 kN Clamping platen (hxv): 995 x 1050 mm. Clear width (hxv): 630 x 630 mm. Mold opening stroke: 820 mm. Mold installation height min: 330 mm. Maximum daylight: 1150 mm. Ejector stroke: 200 mm. Ejector force forward/back: 58 kN Injection unit: SP1000C Screw diameter: 55 Ls/D Ratio: 20 Injection pressure: 1904 bar. Swept volume: 523 cm3 Shot weight PS: 476 gr. Injection flow: 428 cm3/s Screw speed. Standard/ZE: 65/80 1/min Plasticizing flow: 58/83 Nozzle contact force: 110 kN Pump motor rated output: 45 kW Installed heating capacity: 19 kW Control zones, barrel heating: 5 Oil filling: 720 l. Max mold weight: 3430 kg. Dimensions: Net weight with control cabinet: 12.500kg Length x Width x Height: 5.97 x 1.04 x 2.36 m

ARBURG ALLROUNDER 221 K5 350-100 (2002) Injection molding machine Closing force: 350kN Opening stroke: 200 mm. Mold mounting height: 150-300 mm. Distance between columns: 350-500 mm. Mold clamping plates: 221 mm. Mold diameter: 342 x 250 mm. Weight of the mit. Mobile of the mold: 75 kg. Ejector force: 24 kN Ejector stroke: 60 mm. Pump motor: 7.5 kW Dry running time: 14.1s Screw diameter: 25 mm. Screw length L/D: 20 mm. Screw stroke: 100mm. Injection volume: 49 cm3 Injected part weight: 41 g/PS Injection pressure: 2000 bar. Injection flow: 54 cm3/s Spindle tangential speed: 29 m/min. Spindle torque: 300 Nozzle support force: 50 kN Nozzle separation stroke: 180 mm. Nozzle cylinder heating: 1600 +3 x 900 kW Oil tank: 50 l. Voltage: 50Hz Heating: 4.6 kW Total connection: 12.1 kW Weight: 1260kg.

SANDRETTO MEGA T 4435/610 injection moulding machine (1998) 610 ton thermoplastic injection machine In working condition. Euromap 4435/610 Screw diameter: 21 Calculated injection volume: 2831cm3 Screw length (LD): 21 Maximum injection capacity: 746 cm3/1” Laminating capacity: 86 g/1” Pressure on material: 1548 bar Closing force: 610 tons. Variable displacement engine torque: 5570 Nm. Screw speed: 153 RPM Screw hydraulic motor power: 120 HP Injection group stroke: 725 mm. Heating zones: 4+nozzle. Total heating power: 38 kW. Mold locking force: 5985 kN Mold thickness min/max.: 300/1000 mm. Mobile plane stroke: 930 mm. Plate dimensions: 1270 x 1270 mm. Column passage: 850 x 850 mm. Column diameter: 160 mm. Extraction force: 103 kN Puller stroke: 350 Vacuum cycles: 10-11 n/1” Hydraulic circuit pressure: 160 bar Oil tank capacity: 850 l. Electric motor powe ...

Manufacturer: Arburg Type: Allrounder 420 S 1000-350 Year of construction: 2000 Clamping force: 1000 KN Minimum tool installation height: 225 mm Maximum opening distance: 575 mm Screw diameter: 35 mm Maximum dosing volume: 139 cc Accessories: Helios granulate dryer, type Jetboxx E economy Flowbox Fa. Alpha ionstatex Protective enclosure with door (Bosch profile) for robot assembly Handle extension 200 mm Location: Seelbach We will be happy to send you further information on request.

Nissei ASB50 year 2011 Working hours 60000 Including: Drier Wittmann Drymax E30 year 2012 with 100l hopper and Feedmax S3-40 Thermostat: Regloplas 90Smart year 2014 Regloplas 90smart year 2008 Available immediately  ... more information

Plastic Injection Molding Machine ERLHOFF - TE 20/90 ... more information

B&A REF: 8968 TON: 1000 SHOT WEIGHT: SCREW DIAMETER: 100MM STROKE VOLUME: 3925CM3 INJECTION PRESSURE: 1670AR PLATEN SIZES: 1800 X 1580MM DBTB: 1250 X 1000MM MIN MOULD HEIGHT: 500MM MAX MOULD HEIGHT: MM MOULD OPENING STROKE: 1100MM MAX DAYLIGHT: 2300MM EJECTOR STROKE: 400MM CONTROLS: DIMI EL2 PLUS CORE PULLING: 2 AIR VALVES: 2 ROBOT INTERFACE: EUROMAP SCREW DRIVE: ELECTRIC

B&A REF: 8966 TON: 380 SHOT WEIGHT: 1190 SCREW DIAMETER: 70MM STROKE VOLUME: 1308CM3 INJECTION PRESSURE: 2400AR PLATEN SIZES: 1280 X 1280MM DBTB: 920 X 920MM MIN MOULD HEIGHT: 300MM MAX MOULD HEIGHT: MM MOULD OPENING STROKE: 750MM MAX DAYLIGHT: 750MM EJECTOR STROKE: 700MM CONTROLS: CC 200 TOUCH AIR VALVES: 1 MOTOR: ELECTRIC HEATING CAPACITY: 44KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: ELECTRIC

B&A REF: 9033 TON: 370 SHOT WEIGHT: 1060 SCREW DIAMETER: 70MM STROKE VOLUME: 1175CM3 INJECTION PRESSURE: 1700AR PLATEN SIZES: 990 X 1070MM DBTB: 630 X 710MM MIN MOULD HEIGHT: 300MM MAX MOULD HEIGHT: 750MM MOULD OPENING STROKE: 710MM MAX DAYLIGHT: 1460MM EJECTOR STROKE: 275MM CONTROLS: DIMI EL2 PUS CORE PULLING: 1 AIR VALVES: 1 MOTOR: 37 HEATING CAPACITY: 22KW SCREW DRIVE: HYDRAULIC ROBOT INTERFACE: EUROMAP

Manufacturer: Krauss Maffei Type: KM 650-3500-700 CZ Year of construction: 2007 Control: MC 4 Clamping unit: Clamping force: 650 t Opening distance: 1150 mm Tool installation height min.: 600 mm plate spacing : 1750 mm Tie bar distance (h x v): 1100 x 900 mm Panel dimensions (h x v): 1510 x 1370 mm Centering (nozzle ejector plate): 200 / 200 mm 1.Injection unit: Screw diameter : 80 mm Injection weight in hp. Max. : 1400 g Displacement: 1543 cc Injection pressure: 2205 bar 2. Injection unit: Screw diameter: 45 mm Injection weight in polystyrene: 278 g Displacement: 305 cm³ Injection pressure: 2,336 bar Accessories: 2 x Air valve 16-fold cascade 3 x core pull on BWAP 3 x core pull on FWAP 20 x hot runner control units Robot interface: Euromap 67 Metrics: Total weight: 34,500 kg Total size L x W x H: 7.8 x 2.5 x 2.5 m Operating hours: 45400 h  ...

Manufacturer: BATTENFELD Type: HM 1300-9200H-7700H-BM Control: UNILOG B4 Clamping force: 13000 kN Year of construction: 2005 Technical data closing page: Drive type: fully hydraulic Closing type: Full hydraulics Type: four-spar Clamping force: 13000 kN Tie bar size h: 1600 mm Tie bar size v: 1250 mm Panel size h: 2220 mm Panel size v: 1880 mm Installation height min: 1000 mm Installation height max: 1800 mm plate spacing max.: 3850 mm Opening distance: 2850 mm Ejector stroke: 350 mm Ejector force: 165 kN Centering movable plate D: 315 mm Centering fixed plate D: 315 mm Technical data spray side: Screw diameter: 120 mm Displacement: 5655 cc Spray pressure: 1630 bar Screw length: 22 l/d Plasticizing current: 144 g/s PS The technical data of the 2nd injection unit are as follows: Injection unit II 7700 Screw diameter 100 mm, Specific spray pressure 1960 ...

Rexroth double pump for Battenfeld injection moulding machine R900737658 SYDFE1-20/100R R900737659 SYDFE1-20/071R  ... more information

Inverter for ENGEL robots Acopos Multi PO 220 Acopos Multi CO160  ... more information