Manufacturer:
(Category: 308)
Tensile testing machine for plastics, textiles, etc., type Z 653, built 1974, measuring range: 0 - 50 kp / 0 - 500 N. Pulling speed: 25 - 500 mm /min. ... more information
Mobile vacuum station for use on a degassing opening on the extruder or tool as well as for support in vacuum profile forming - a water ring vacuum pump VG-55 mounted on a welded and painted steel base frame with maximum vacuum Volume of 55m3/h, with kpl. connected supply and cooling system - Vacuum connection: 1x connection pipe with internal thread R1" or GEKA coupling and hydraulic hose 2TE DN25 length 700mm - a VA service water separator and storage tank with fresh water connection R1/2", level switch and drain tap for easier daily cleanse - a cooling coil built into the separation tank and removable cooling coil made of hde-ribbed tube - Water drain on water tank: R1 1/4" - Cooling water connection to cooling coil: R3/8" - an additional vacuum separation container made of steel (hot-dip galvanized) in front of a vacuum pump for separation (diffusion) of the ...
Cooling tray type KW 1000-200-200 self-sufficient for strand cooling in the production of granules or filaments. - a mobile and height-adjustable base frame made of welded steel raw, left machine version, painted - Frame-height adjustment of the top edge of the water bath from 900 mm to 1050 mm - a VA cooling tray 1000x200x200mm - 2 pieces adjustable and mounted strand holder - clamped to water edge - 1 piece wiper bled for partial strand drying - 1 piece of adjustable tub plug for filling height adjustment - 1 piece of VA water tank (reservoir) as service water tank - 1 piece of bacon water pressure pump to supply the cooling tank with sufficient cooling water from the water tank - 1 piece of direct 1/2" fresh water connection via float switch and solenoid valve for connection to the customer's side Fresh water network - Tub overflow - drain pipe DN50 for connection to ...
This belling machine from Thyssen Nothelfer is a very complete line. The line is disassembled and has a throughput of up to 10m pipe length. – Brand: Thyssen Nothelfer – Year built: 1996 – Max. tube Ø: 500mm ... more information
- technically efficient, ready to work - after full service - 1 kW engine - doorknob function - pneumatic horizontal pressure - copy template ... more information
Year: 2019 - technically efficient, ready to work – after full service - automatic milling process - movable milling unit - 4 engines - pneumatic profile climping - hydropneumatic feed of the unit - stepless adjustment of feed speed - double-sided profile supports ... more information
Brand new machine designed for screwing reinforcements in PVC profiles. - simultaneous operation of the screwing unit - adjustable distance between screwdrivers 42-110 mm - Automatic screw connection - automatic automatic movement alignment - the ability to work as a screwdriver - screw depth sensor - powerless steering control - Specific feed account Additional equipment: - machine base - pick-up rollers - pneumatic impulse to the feeder (13mm), preventing jamming of the screws in the feeder at the entrance and exit - screw depth sensor - horizontal pressure
Brand new machine designed for screwing reinforcements in PVC profiles. - simultaneous operation of both screwing units - separately adjustable distance between screwdrivers 250-540 mm - automatic screw feeding - automatic disconnection of the feeder movement - screw depth sensor - foot switch control Additional equipment: - machine base - pick-up rollers - pneumatic impulse to the feeder (13mm), preventing jamming of the screws in the feeder at the entrance and exit - feed force pressure reducer - additional manual slot for various screws - extended travel +30 mm to 130 mm - laser positioning pointer - screw depth sensor - horizontal pressure
Year: 2012 The machine has been in production since 2017. - technically efficient, ready to work - after full service - four-head welding machine VS 750 - EV 850 4-axis CNC cleaning machine - transport/cooling station - rotating station - online connection - automatic work cycle - profile height: 30-185 mm - welding dimensions: 350 x 350 mm, 2600 x 4000 mm - 0.2 mm and 2 mm flash reduction - seal formatters - Windows touchscreen operator panel - drilling head for the lower/upper hinge - disc cutter 250 mm - 1 axis of longitudinal travel with gripper
ELNIK Lab furnace MIM3001L-T-50-CF-AB 630,843,011 220,795,054 -AC-AP-DP-STC12-CE-14 year 2022 ... more information
- technically efficient, ready to work - after full service ... more information
- dimensions: 305 x 175 cm - brush strips - stable structure - adjustable leg height ... more information
Robot for flashless welding of PVC profiles - GRAF SL 4 FF EVO windows. Roboter zum gratlosen Schweißen von PVC-Profilen - Fenstern. ... more information
Automatic door handle for making holes for the handle in the window. Automatischer Türöffner zum Bohren von Löchern für Fenstergriffe. ... more information
Cutting center for pvc profiles. Direction of work from left to right. The set includes a label printer, chip extractor, waste conveyor. Zuschnittzentrum für PVC-Profile Arbeitsrichtung von links nach rechts Im Set enthalten sind ein Etikettendrucker, ein Spänesauger und ein Abfalltransporter
Full complete line SACMI for plastic caps. ... more information
Used lining machine PMC 250. Profile 916. Produced in SACMI Italy. Perfect working condition. ... more information
For sale complete line for plastic caps, include: 1. CCM48 with moulds and CVS 2. cooling system 3. slitting machine Perfect condition. Working at moment. Origin Italy. ... more information
SACMI line for plastic caps. Perfect condition. ... more information