other machines for plastic used for sale

Fully automatic hot stamping press Oropress Mechanical eccentric press with lift table Lift table as pneumatic sliding table 250 x 250 mm Fully automatic sequence, optionally triggered with foot switch for single stroke Heated press punch 120 x 200 mm up to 250 °C Safety grille Film Feed Unit Built in 1986

URBAN Welding Cleaning Line Complete line, currently set to Rehau Urban AKS 6110/4-35/25 - Right stop - Year of construction 2001 - Welding dimension 3500 x 2500 - U-welding - C-welding Urban Cooling Belt 20/35 Urban SV 610 with turning station WT 660 - Flow direction right-left - Year of construction 2001 - with profile recognition -Tools: - ISBU - Radius gauge - 2 different groove knives at the bottom and top - Piercing knife for backstabbing wings - Various inner folding knives - Disc milling cutters - Drill groove cutters

For Wood, Plastic, Kitchens, Windows, Doors, Loading Furniture, construction, etc VAT not deductible.  ... more information

Stock number U1984-2 Used impact dryer for pellet by RIETER (Germany) model AERO 500 in stainless steel design (material 1.4541, AISI 321). Dryer is equipped with air blower providing 90 m3/min and driven by electric motor with power 18.5 kW. Dryer has reported output 4000 kg/h of outgoing product. Flow rate of water with pellet: 35 m3/h (maximal), 25 m3/h (nominal) and 20 m3/h (minimal). Nowadays machine has installed screens with mesh 1.2 mm. Machine new 1997. Shipping dimensions of dryer: width 1400 mm x length 3830 mm x height 2265 mm. Weight of machine – 700 kg. Body of drying chamber is sound-muffled. Technical documentation included in german language. Machine had been working on PP pellet.

Keyence Agilista 3200W High Resolution Industrial 3D Printer Material Jetting AR-M2 AR-G1L AR-G1H Type: Agilista - 3200W manufacturer: Keyence Corporation, Japan Date of purchase according to invoice: 18.05.2017 Operating time: 40,985 h Printing time: 1,907 h Specifications: - Printing material: AR-M2 (transparent printing material), AR-H1 (heat-resistant printing material), AR-G1L (Silicone Rubber [Low Hardness]), AR-G1H (Silicone Rubber [High Hardness]) - Support material: AR-S1 (water-soluble support material) - Build volume: 297 × 210 × 200 mm (DIN A4 size × 200 mm) - Resolution: 635 × 400 dpi - Layer thickness: High resolution AR-M2: 15 μm, normal Resolution AR-M2: 20μm, AR-H1: 20μm, AR-G1L/H: 30μm - Interface: Ethernet 10BASE-T / 100BASE-TX - Operation: colored touch panel - Dimensions: 95 x 70 x 136 cm - Weight 188 kg

- 5 aluminium silos with attachment filter incl. discharge screw with slide made of V2A - 4 aluminium silos for manual filling with discharge screws - 3 dosing scales - Optional with dust filter  ... more information

Plastic compactor Main drive 132 kW Complete system with recutting mill, fine material separation and recirculation, electrical control ... more information

Stratasys FORTUS 900mc 3D printer YOM 2015, USA Computer Numerical Control (CNC)- Brand: Touchworks Technology: Fused Filament Fabrication (FFF) Materials: Thermoplastics. Polymers/Thermoplastics: PLA, Polyesters, Polyamides, Polycarbonates, Styrenes: ABS, ASA, Polysulfones, Polyaryletherketone, Polyimides Two vials for main material 1508 cc Two vials for fixing material 1508 cc Automatic switching from one vial to another Feedstock format: Filament 95% rate of yield Total Installed Capacity: 7,5 kW Working volume (XYZ): 914.4 x 609.6 x 914.4 mm Details up to 200 kg Build volume 508.756164 L Min. layer thickness 0.51 mm X/Y accuracy: +/- .089 mm or +/- .0015 mm per mm, whichever is greater. Z part accuracy includes an additional tolerance of -0.000/+ slice height. Note: accuracy is geometry-dependent. The vacuum board is adapted for use with two sizes of construction s ...

Slitter rewinder for foil, paper, foiling and laminates. 7 my -200 my Max. material width = 1250 mm Speed max. mech = 350 m/min, Rewinder max. = 600 mm Min. working width = 25 mm, sleeve 76 mm, Max. working width = 1250 mm, sleeve 76 mm,, Unwinder (shaftless) diameter max. = 1000 mm Sleeve = 70-76/ 150 -152 mm, Cutting system = paper cutting, Side edge control , 16 knives included,

Laminating unit (not complete machines) The machine is used for the coating of a product web with simultaneous Laminating a second goods railway. Products = 200-800my PET with 40-80 my PE Working width max. = 1600 mm, Speed = 70 m / min Approximately 1000 operating hours New price approx. = 400,000 euros) Accessories: 1x Barrel melter 1 x storage unit 50 liter / 86 KW Nozzle

Machines for the production of wicketer bags. (e.g. bread bags) Material = Ldpe; HDPE, PP Power max. 120 bag / minute. Rapport 250 -500 mm, Unwinder width = 1400 mm ( With brake ) Side edge control . Folding unit Punch for holes Wicket transport unit  ... more information

Automatic machine Bag machine for the production of bags on roll. Capacity 50 bags / minute (depends on the size) Machine width 1200 mm Unwinder width = 1200 mm (tubular film) Core Magazine Folding unit for C folding Floor welding and perforating unit Automatic winder (turnstile) with automatic sleeve feed

For sale is a laminating resin system from IMT SpraySystems. The plant is in very good condition, it has been properly shut down by personnel of the machine manufacturer and filled with mesamol for protection. New price of the system is 85000.-€. The system was cleaned and visually prepared. Circuit diagram, operating instructions and maintenance overview are available. The systems were regularly inspected by the manufacturer as part of a maintenance plan. Applications: Wind power (offshore and onshore) Shipbuilding Lightweight construction Automobile industry Railways (e.g. for the sealing of track beds) Aircraft construction (especially for the construction of the individual components) Corrosion protection Concrete renovation Chemical Resistant Equipment Wastewater (especially in the sewerage system) On request, at an additional cost, the machine can undergo factor ...

Lot Composed of various machinery for the processing of plastic and wooden components for eyewear. n.1 Ventilation System with extractor and filters: Used for the extraction of fumes generated by the combustion of PVC materials in ovens. n.1 Cielle CNC machine: Used for milling and cutting wooden components for glasses. Brand Cielle Model ALFA 61X6, Year 2011, S/N 24/11 WEIGHT 250kg VOLT 220/240 POWER 1800W n.1 Double action oven: Used for firing PVC material (Working temperatures up to about 300 degrees Celsius, 4 pieces. n.1 Green Box Chiller for closed-loop cooling of machinery. n.1 Press and Dehumidifier (5 pieces) : o Press: Used to cut labels that were then printed on the fabric. o Dehumidifier: Used to dehumidify TPU material into granules. o 1 Laser : Used for laser cutting organic material, also used for cutting fabric (textile). Can also be used for engraving. o n ...

Plant complete with all the machinery and molds to produce plastic pots, saucers, cages and thermoformed pot holders of various types and sizes: from 40 cm. up to 1 m. Composed of: N1) 135 ton SANDRETTO plastic injection press N1) 135 ton SANDRETTO plastic injection press N1) 200 ton SANDRETTO plastic injection press N1) 300 ton SANDRETTO plastic injection press N1) 400 ton SANDRETTO plastic injection press N1) 5 pallets CAMPETELLA robot + labeller N1) 7 pallets CAMPETELLA robot + labeller N3) automatic stacking and coding lines N2) mold cabinets with drawers with a capacity of 1000 kg N1) refrigerator to cool water N1) freecooler to cool the oil N59) molds for flower pots

Holtrop Jansma clean air extraction with rotary lock, fire protection device, autom. Fire extinguisher & fire damper Brand: Holtrop Jansma Type: MSO400 ZRSL Year of construction: 2022 M-No.: W0061083B, Clean air extraction: MSO 400ZRSL Intake manifolds: ø400 mm Length: 3,650 mm Width: 1,230 mm Height: 3,270 mm + 1,500 mm Weight: 1,000 kg Capacity: 11,000 m³/uur Pressure: 1,965 Pa Power supply: 11 kW, 380V, 3Ph, 50 Hz Filter surface: 69 m2 Length of filter tubes: 1,450 mm Filter tube diameter: 200 mm Cleaning: included Return air duct: 500500 mm Noise: 80 dB(A) Flame Protection Fire Extinguishing Device:: Includes: automatic powder fire extinguisher Automatic flame protection flap in the return air duct automatic shutdown of the fans Check valve in the intake line Vibrating device: Incl. programmed Switchboard Turnstile: DRSL-3000 Dimensions of di ...

Year: 2004 technically efficient, ready to work – after full service 3 engines pneumatic profile climping  ... more information

Year: 2007 - technically efficient, ready to work – after full service - engine: 2x 0.45 kW - disc: 2x 200 mm - pneumatic feed - vertical clamps  ... more information

Eddy current separator from Bakker Magnetics 104 E The latest eccentric eddy current "104" X Ecentric Magnetics has been specially developed and designed for the separation of fine particles from, for example, bottom ash, electronic scrap or small metal fractions. The high-speed magnetic rotor in this machine has the highest number of poles on the market, namely 104 (!) and operates at a speed of 3,600 rpm. The 104 rotor produces an astonishing field frequency of 1.56 kHz Production width 2 meters wide

Stock - No.: 1820 1 used, overhauled CUBE DICER as type Sagitta - LANCELIN BG 200 working width 200 mm drive 7,5 kW – NEW cutting tools 4 x 4 x 3 mm cube pellets incl. pneumatic infeed roller system More pelletizing equipment ex our stock Wuppertal Germany available, Ask for our most recent stock-list or visit us