Manufacturer:
(Category: 308)
No.: 2324 1 used strand-pelletizer Alphatec type AS-G 200 E year 2019, very good condition - lab / demo use only working width: 200 mm drive 7,5 KW – AC frequency controlled cutting rotor with hard-metal teeth pneumaticm pressure roller device Machine is ready for demo. More strand-pelletizer ex our Stock available: Scheer, Automatik, Rieter, IPS, AlphaTec, Pelltec, .. Our actual machine stock-list you can find on our Homepage: plasticotrading.de
Year: 2022 - technically efficient, ready to work - after full service - automatic screw feeding system - pneumatic control - machine base - pneumatic profile mounting ... more information
IMMEDIATELY AVAILABLE - video link on request KA 550 CNC-DRILL CNC-controlled 3-axis sawing and drilling center for sophisticated production technology Encapsulated, compact machine - designed as a closed production island - no noise and no chips in the machine environment - large extraction connection for efficient chip extraction. (The machine is also supplied as a two-axis sawing center without drilling unit). Dimensionally accurate 90° saw cuts both in small series and in large series production. CNC control based on Windows® with touch screen and color screen, simple menu-driven programming with symbols, remote maintenance module. Absolutely burr-free precision sawing of all materials such as - various plastics such as PVC and polyamide - GRP (glass fibre reinforced plastics) - aluminium - bronze - wood - copper - brass and . Drilling (through holes and blin ...
Year: 2018 - technically efficient, ready to work – after full service - engine: 1,5 kW - pneumatic feed - vertical clamps ... more information
Year: 2007 - technically efficient, ready to work - after full service - flow limitation: 0.2 mm - maximum welding dimension: 2400 mm - support arms ... more information
Clamping plates: 850 x 1250 mm - Fastening of the tools via T-slots Stroke of the upper Clamping plate: 400 mm max. Opening width: 800 mm max. Tool installation height: 400 mm min. Table height: 1080 mm Clamping force: 400 kN Opening force: 480 kN Beam angle: 85° top plate Tilt range Frame: From 0° to 90°, hydraulic Plate rotation range: From -90° to +90°, manual Travel cylinder: 1 PARKER travel cylinder Force elements: 2 power elements with clamping jaws, mounted at the front Mould weight above: approx. 400 kg max. Total mould weight: approx. 1000 kg max. Valve Control: Black/White Valves for Travel Cylinders and Power Elements Core Pull Control: Without Core Pulls Hydraulic power unit: H-L 55/22 - Operating pressure max. 250 bar Control: Without control Dimensions: Mould carrier: approx. 1,600 x 1,400 x 2,000 mm (width x depth x height) Weight: appr ...
Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw ... more information
Rotor diameter: 500 mm Rotor width: 1200 mm kW: 30 ... more information
The plant is suitable for the agglomeration of thermoplastic films and fibers. Depending on the material, the throughput is between 500 kg – 1000 kg/h. The facility consists of: • Feed belt • Load-dependent control for the feed belt • Metal detection coil • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo Ce9vqix • Plastcompactor unit HV-70, which consists of storage silo feed auger, plastcompactor, central blower and cooling circuit • HERBOLD recutting mill type SML 45/100-S4-2 • Intensive cooling • Conveyor blower SZS II 630/200 • Screening machine • Undersize recirculation into the compactor silo • Material conveying type MFT with big bag station and automatic diverter to the on-site silo • Automatic exhaust air filter • Electrical circuit •Compressor.
Bag machine TS 800 for side seam products from RHS Elektrotechnik (Stiegler) Conversion of servo technology 2017/2018 by RHS Working width 150 mm – 750 mm Throughput max. 50 m/min., 50 – 150 cycles/min. 2 single hole beams/6 mm Feed 70mm – 250 mm, single-lane unwinding ... more information
Bag machine U 1100 for side seam products from RHS Elektrotechnik (Stiegler) Conversion of servo technology in 2013 by RHS Working width 300 mm – 1100 mm, Throughput max. 70 m/min., 20 – 200 cycles/min., 3 single hole beams/6 mm Feed 70 mm – 300 mm, single-lane unwinding ... more information
Horizontal cutting machine Width max approx.: 1650mm Cutting height max approx. : 1200mm max block length approx.: 3000mm Year of construction 2021, Manufacturer: Hengsheng, modified by German company according to CE Little used Location Stuttgart ... more information
Used three-station slat banding machine by KURZ model LS101. New 1998. Allows trimming of three sides of the profile in one pass. ... more information
The mixer combines hot and cold mixing. After hot mixing, the material automatically enters the cold mixer for mechanical cooling. -hot tank 800 l. - cooling tank 2000 l. - hot stirring time from 6 to 10 min. - cooling time from 10 to 15 min. - engine power 110 kW The device is adapted to the production of WPC terrace boards. Components needed for the product, such as PVC and wood dust or MDF dust, can be combined.
- technically efficient, ready to work - after full service ... more information
Vertical Bevel-Cutting Machine Manufacturer: Hyma Model: VSL.A.75 Manually operated roller table with aluminium covered table-too Hand-wheel operated rest-plate with ratchet mechanism for repetitive cutting of same width: 0-130mm Inclinable cutting section with four dynamic balance blade-wheels, each suspended between two adjustable bearings Motorised angle-adjustment for cutting section: +/- 60 degrees. Electric blade drive motor Twister double-edge ground bank knife for cutting in forward and reverse movement of roller table Blade tension control with indication lamp and automatic cut-off on blade slackness and breakage Manually height-adjustable blade guard and fine-adjustable blade guide rollers above and below table Friction grinding apparatus with two adjustable cupstones Electrical control box mounted on table front, adjacent to operator Standard dimensions: Cuttin ...
Slitter Slitter cutting width 750 MM Knife length: 750 mm Mounted on a table (table dim. 1000 x 900 mm) 2 hands control (safety matter) ... more information
This haul-off machine, manufactured by Battenfeld Extrusionstechnik GmbH, is in the machine storage of Plastima Used Machinery. The machine, a model Haul-Off R630/6V, dates from the year 1990. Make: Battenfeld Extrusionstechnik GmbH Model: Haul-Off R630/6V Year of manufacture: 1990 Voltage: 380 V Power: 4,5 kW Pipe diameter max: 110 mm to 630 mm
PVC - heating / cooling mixing combination Hot mixer 750 ltr. / Cooling mixer 2,500 l. Engine power: 212 + 45 kW ... more information
- technically efficient, ready to work - chiselling up + down - place for the milling head ... more information