shredders used for sale

intake cross section: 2500 x 1,700 mm motor power: 160 kW rotor flight circle: 670 mm rotor execution: cutting inserts on tool holders counterknife: with cut gap adjustment machine weight: approx. 24,000 kg  ... more information

Hopper opening: 3,000 x 2,000 mm rotors: 2 Pcs. Rotor flight circle: each Ø 590 mm cutting tools: 13 pieces cutting plates 120 x 120 mm on tool holders bearing: pedestal drive: 2 x 90 kW machine weight: approx. 24,000 kg facilities: incl. hydraulic screen door latch / interfering substance removal

intake cross section: 5,000 x 3,500 mm motor power: 2 x 110 kW motor power hydraulic unit: 22 kW rotor flight circle: 635 mm rotor execution: 244 pcs. cutting tools on tool holders screen: hydraulically tiltable hopper volume: approx. 40 m³ machine weight: approx. 55 tons  ... more information

intake cross section: 1,600 x 1,200 mm motor power: 2 x 45 kW knife width: 55 mm knife number: 56 pieces rotor flight circle: 655 mm Planetary gearbox  ... more information

TECHNICAL SPECIFICATIONS Manufacturer: BHS Sonthofen Designation: Rotor impact mill Type: RPMX 1116 Year of construction: 2016 Drive power: 200 kW Rotor diameter x height: 1,150 x 160 mm Grain spectrum: 0 - 15 mm Grinding gap adjustment: 4 - 6 mm Number of rackets: 8 pcs. Circumferential speed: max. 90 m/s Dimensions (LxWxH): 4,600 x 2,000 x 2,800 mm Total weight: approx. 10,000 kg SPECIFIC COMMENT - Factory refurbished 2023 - Rotor wear parts completely renewed - Both outlet shafts renewed - Safety equipment renewed - Ideal for the recovery of valuable materials from metal-containing fine fractions (stainless steel and cable strands) - Without control (but can be offered)

TECHNICAL SPECIFICATIONS Manufacturer: BHS Sonthofen Designation: Pre-ripper Type: VSR 1215 Version: Twin-shaft shredder / rotor shear Year of construction: 2018 Rotor diameter x length: 530 x 1,500 mm Operating hours: approx. 500 h Drive power: 2 x 90 kW Rotor speed (max.): 16 - 37 RPM Nominal torque: 33,000 Nm Number of tearing tools: 8 pcs. Width of tearing tools: 80 mm Total weight: approx. 22,000 kg SPECIFIC COMMENT - Incl. control cabinet/control - Incl. hydraulic pressure unit - Incl. steel substructure - Warranty for approx. 500 Bh - Shredding of domestic, commercial, bulky waste, waste wood, e-waste, plastics,...

Recycling machine trade AGICOM- Pedergnana OG: The mulcher is used to recover iron and aluminum from high-voltage lines. Cable cross-sections: Ø 10 - 50 mm Power consumption: approx. 31 kW / 380 V Dimensions: approx. (L x W x H) 1,300 x 1,300 x 1,740 mm Weight: approx. 3,500 kg  ... more information

AGICOM recycling machines: Very good, almost as good as new single-shaft shredder for old cables, wood The cutting width or rotor length is 400 mm, 30 mm indexable cutting plates are installed. The machine has a hydraulically driven gate valve equipped with pressure monitoring. The machine has only 35 hours of operation and is still coated with the original paint in the cutting room. • Year of construction 2007 • Propulsion: 9.2 kW • Hydraulic pusher: 1.5 kW • Weight of single-shaft shredder Bano MAC400: approx. 850 kg

agicom recycling machines: Powerful, very powerful pre-shredder for old cables, scrap, paper/cardboard or plastic. Robust design, hydraulic pusher, easy replacement of the perforated screen, reversible blades Year of construction: 2021 Power: 30 kW; 400 volts Cutting blade: 43x43 mm Rotor length: 600 mm Rotor diameter: 250 mm Dimensions: 1550x1500x2100 mm Weight: approx. 1600 kg

Forrec AE-600R single-shaft shredder: Used and very powerful single-shaft shredder for a wide range of applications. Easy replacement of perforated screen, hydraulic pusher Technical data shredder Forrec AE-600R: 30 kW; 400 volts Cutting blade: 43x43 mm Rotor length: 600 mm Rotor diameter: 250 mm Dimensions: 1550x1500x2100 mm Weight shredder Forrec AE-600R: approx. 1600 kg

AGICOM recycling machines: Cable shredder/granulator IRS PM1840 used. Technical Data Cable Shredder: 5.5 kW, 32 A Perforated screen 10 mm; LxWxH: 135x120x212 cm approx. 550 kg  ... more information

Permanent Overbelt Magnetic Separator TYPE PEM1200 1200 x 550 x 200mm = 4x eyebolt for suspension Drive roller + deflection roller S235 steel welded and machined Ø150x300mm convex overtightened, shaft fixed with tension bearings. Two-hole flange bearing UCFL with grease nipple, sealed bearing cage Propulsion: Slip-on geared motor GEMOTEG 0.18KW, speed 0.4m/sec Connection 400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt endless GB30 black matt 7 x T20 cleats high-frequency welded High-quality 3-fold aluminum construction 2 side mudguards V4A Magnet dimensions: 700x230x120mm magnetic core encased in soft iron, so that a very high permeability can be guaranteed. Underbody tightly closed and sealed with stainless steel plate and pole shoes.

Granulator granulator with 600 mm rotor width, 3 cutting blades, 37 kW motor power, very little used, like new.  ... more information

Granulator with rotor width 1000 mm, motor 37 kW, with hopper attachment and hydraulic feed slide. Knives resharpened and whole machine repainted. Very good condition. Optionally with total separator and fan for the regrind.  ... more information

Granulator with rotor width 500 mm, feed chute, 6 replacement screens with square holes. The upper part can be opened by means of a rack and pinion winch for easy knife change and cleaning. Machine is in very good condition and has been little used. Optionally, a fan and a total separator for the regrind are available.

Pre-shredder for garbage, waste wood, green waste, roots, commercial waste etc., five travel drives, auxiliary hydraulics, SPECIAL FEATURE: Engine, hydraulic system and electrics new after fire damage, service and tools new or as good as new.  ... more information

Shredder for green waste, roots, waste wood, reed wood, organic waste, biomass, bark, etc. Equipment: Radio, hydraulic travel drive, overbelt magnet, SPECIAL FEATURE: Both shredding shafts, basket carrier with bio-cutting unit, baskets, tools, large service renewed before 100 hours of operation original Komptech.

Single shaft shredder with 1350 mm shaft, hopper 1350 x 1100 mm, motor 37 kW, all bearings new. Extremely robust construction. Slow runners.  ... more information

Permanent Overbelt Magnetic Separator TYPE DMPM1400 1.600 x 900 x 220mm = Solid steel construction, welded Welded & painted construction RAL 7016 (anthracite grey) Magnet dimensions: 1.000x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm spherical overtightened, shaft fixed with tension bearings. Drive: Slip-on geared motor GEMOTEG 1.1KW, speed 0.4-0.6m/sec Connection 400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5,4mm thick Conveyor belt width: 700mm 7 pcs. TG-40 cleats high-frequency welded Belt material: 3-ply particularly transversely stable Equipped with stainless alligator connectors RS125 Magnet Features: Built-in magnetic core: Strontium Ferrite Y30 Bonded SfRe strontium hard ferrite  ...

Engine power 4.0 (5.45) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 880 mm width 735 mm Height 1540 mm Weight 70 kg material Steel painted Hoehe ejection in 450 mm ; New machine - best condition  ... more information