meat and fish processing machines used for sale

Fomaco FGM 112 is a high-performance equipment designed to enhance the quality of meat and fish while increasing the yield rate. It is specifically suitable for working with bacalao fillets, as it offers extended clearance to accommodate them. The machine is equipped with two bridges, each featuring 112 Quadro needles with a diameter of 2.5 mm. The capacity of this injector can reach up to 15 tons per hour, depending on the product being processed. This injector fully complies with all sanitary and safety regulations, ensuring the highest standards are met while significantly reducing production costs. Additionally, it is equipped with a brine filter and a storage tank for convenient brine handling and storage.

Baader 581 is an advanced machine designed for salmon and large fish filleting, emphasizing yield, hygiene, performance, and fillet quality. It's known for its innovative, computerized tools and versatility, making it suitable for various fish species and processing conditions, positioning it as one of the most powerful and advanced filleting machines globally. Fish species/size range: Salmon- 2-7kg (gutted, head on) Salmon trout- 1,8-5kg (gutted, head on) Processing state: headed and gutted Performance: 16fish/min Power consumption: approx. 6kW

Recently overhauled, the Mesa 955 cuts lower jaws and cleans fish heads using water-pressured brushers. It’s ideal for whitefish like cod, haddock, and pollock. The machine’s variable speed drive gives you precise control over fish heads during processing. Plus, it easily integrates into current production lines, enhancing workflow and efficiency.

We are selling here a Menger from the manufacturer Stork u. Herrmann, type KM 90D in a very good used and functional condition. The machine runs on 400 volts, built in 2020, rollable, completely stainless steel, 90 litres, workshop tested, ready for immediate use, dimensions W/D/H 80/110/120 cm, others on request.

All stainless steel meat mincer for flaked frozen meat. One of the best meat Grinders on the market 220 mm Diameter plate One knife, one mince plate set up With end ring support hoist  ... more information

Vemag Vacuum Filler Model Robot 500 With portion control and straight fill, two auger feeds, large hopper capacity. Stainless steel construction, very tidy condition. Offered in good working order  ... more information

Linco Flex-cut up line : - Tail cutter - wing tip cutter - Middle wing cutter - wing cutter - pre-cutter - Front half cutter - Breast cap cutter - Saddel splitter - Drum cutter - Chops cutter - unloader More pictures on request  ... more information

A bacon cutter from Treif is sold Type: Felix Year of construction 2016 incl. 2 pairs of creels of your choice Machine is in good condition and ready for immediate use Price from stock 6800 net  ... more information

An injector from Rühle is sold Type: IR 29 Year of construction 2019 Capacity: approx. 2000 kg/h Belt width: 360 mm With steaker attachment The machine is in very good condition  ... more information

The injector is a device for introducing brine solution through point injection of the raw product. Producer: Fomaco; Model: FGM 208 B; The machine has 208 needles (4mm diameter); The width of the tape is 740mm; The conveyor belt is not complete; Without brine filter; Length: 2300 mm; Width: 1200 mm; Height: 2300 mm; Weight: 1500 kg.

K&G Wetter/Möhle Wolf E 22 Enterprise 1.5 kw, 400 volts Used machine, function tested several available, from purchase of 3 pieces special price  ... more information

Cato PTF Peeler in reconditioned Condition  ... more information

Ramon 40 liter cutter, 2 speeds, bowl stainless steel, function tested  ... more information

124 needle (31x4) injector. 5,5 kW, 3x400 V, 50Hz  ... more information

Stock# U2410-1 Used stainless steel cutter/mill by Urschel Laboratories (USA) Comitrol Processor model 1700. Machine is designed for size reduction of free-flowing, dry and semi-dry, products and is equipped with microcut head. Urschel Comitrol Processor 1700 is able to work on three types of heads - slicing head, cutting head or microcut head. Machine is driven by 22,3 kW, 2955 rpm, 380 V, 50 Hz electric motor. Cutting chamber is sealed and deters escape of dust, vapor and liquid. Includes switchboard and control panel. Dimensions are approximately 1300 mm lenght x 900 mm wide x 1800 mm high, weight approx 500 kg.

Stock # U2397-4 Used stainless steel micro cutter/emulsifier by Haarslev A/S (DK) model HF 175. Machine is designed for emulsifing a product, paste type. Can run on meat, chicken, pork etc. Output depends on product and can reach 3-4 tons per hour. Feeding inlet into milling chamber has diameter 105 mm. Machine has stainless steel shaft driven directly by el motor 55 kW, 2950 rpm, 380 V, 50 hz. On the shaft there are mounted two sets of six blade knives and screens. First screen has diameter of holes 1.2 mm. Second screen has holes with diameter 0.8 mm. Knives and screens are designed in non-corrosive steel. Body of milling chamber designed in stainless steel. Discharge via outlet with diameter 65 mm. Machine has local control panel and is mounted on four legs. Includes technical documentation. Last time used in food industry.

Stock # U2397-2 Used stainless steel horizontal twin ribbon mixer by Laska (AT) model ME3000. Machine has internal dimensions of mixing chamber W 1505 mm x L 2005 mm x D 1170 mm. Total volume of mixing chamber 3000 l. Working volume in range from 2100 l up to 2400 l, and weight of batch up to 2400 kg. Mixer has twin shafts with welded ribbons. Each shaft is driven by el. motor 11/7.5 kW, 2880/1450 rpm, 380 V, 50 hz, via reducer and chain. Working rotation of each shaft 36/71 rpm. Mixer has top open. Discharge through two front wall outlets, equipped with two lids designed in teflon and operated via hydraulical actuators. Mixer has hydraulical device driven by el. motor 1.5 kW, builded inside supporting pedestal. Mixer is mounted on four tension cells. Machine has connection pipe for feeding liquid inside the mixing chamber during the work. Mixer is equipped with stainless steel lifti ...

Stock# U2397-1 Used stainless steel twin shaft paddle mixer by V.V.S. DI VISCONTI SRL (Italy) model I1500SF with total volume of mixing chamber 2500 l. Working volume in range from 1500 l up to 1700 l. Weight of batch up to 1500 kg. Machine has internal dimensions of mixing chamber W 1100 mm x L 2870 mm x D 900 mm. Shafts are driven by el. motor 22 kW, 1470 rpm, 400-600 V, 50 Hz, via reducer and belts. Working rotation of each shaft is 33,5 rpm. Mixer has top open. Discharge through one outlet with dimensions 500 mm x 200 mm, in front wall. Outlet is equipped with pneumatically operated lid layered with teflon. Mixer has stainless steel lifting device for work on rectangular containers with volume 200 l and width 660 mm. Lifting device is operated electrically. Machine has technical documentation. Last time used in food industry.

K+G Wetter Cutter 90 liters SM 90 STL Type 261  ... more information

Seydelmann AU200 AC6 Grinder High throughput grinder with extended hopper 121 Kw 2016 machine, in lovely condition.  ... more information