sheet metal working used for sale

The STIGAL DYNAMIC SPEED HQ 1500X3000 plasma cutter was manufactured in 2013 by the Polish company Stigal. A computer-controlled thermal cutter is designed for cutting out shapes from a sheet of metal. It is equipped with, among others in: CNC G-CODE control, CAD / CAM WRYKRYS software, CEBORA PROF 165 HQC aggregate, or a cover protecting the operator's eyesight. The cutter's cutting width is 1500 mm, length is 3000 mm and the thickness is 20 mm. The machine's torch moves at a speed of 330 mm / s and cuts metal sheets with a maximum thickness of 20 mm. The total weight of the machine is 3 tons. Technical data of the STIGAL DYNAMIC SPEED HQ 1500X3000 cutter - cutting length: 3000 mm - cutting width: 1500 mm - maximum material thickness: 20 mm - maximum cutting thickness: 20 mm - permissible table load: 150 kg / m2 - maximum travel speed: 90 m / min - type of burner height adju ...

The Diper Design DEVANADORA D5-EH-V35 sheet profiling machine was built in 2004 by the Spanish company Diper Design. The machine is designed for profiling metal sheets with a maximum width of 1250 mm. The mandrel diameters (closed / open) are 450 and 550 mm, respectively, and the roller diameter is 1500 mm. The profiling machine works with a bending speed of 35 m / min. Roof flashings were produced on the machine. By using an appropriate matrix on the machine, it is possible to produce e.g. gutters, metal shelves, window sills, profiles, etc. The total weight of the machine is 5 tons. The machine is fully operational and ready for further work. Technical data of the Diper Design DEVANADORA D5-EH-V35 profiling machine - bending speed: 35 m / min - maximum sheet width: 1250 mm - roll diameter: 1500 mm - spindle diameter (closed): 450 mm - spindle diameter (open): 550 mm – maximu ...

The IQM MICROSTEP SPLR 6001.25 Pr BEM 12 CNC plasma cutter was manufactured in 2008 by the Slovak company IQM s.r.o. Thanks to the rotary head tilted by ± 50 degrees, it is possible to cut sheets of various thicknesses - 25 mm with a burner tilt of 50 degrees, 35 mm with a burner inclination up to 25 degrees and 50 mm with a zero burner inclination. The working table has a bridge structure with pneumatically opened sections, and its dimensions are (L x W) 6000 mm x 2500 mm. The burner is equipped with, among others in: MSNC 500 CNC control, AsperWin software with AsperBevel module or Hypertherm HPR 130 plasma unit. The total weight of the R-SPLR 6001.25 PrBEM12I (G) plasma cutter is 5000 kg. Technical data of the IQM MICROSTEP R-SPLR 6001.25 PrBEM12I (G) CNC plasma cutter - dimensions of the working table (length x width): 6000 x 2500 mm - type of working table: bridge with pneum ...

The laser WUXI CHEERON QY-LC1500-2540 FIBER was produced in 2020 by the brand Wuxi Cheeron Qingyuan Laser Technology Co. The machine is new, it was only included for a test run after the purchase. The machine uses an IPG Photonics (Germany) laser source. The 3-axis fiber optic laser cutter has a power of 1500 W and a large working area of ​​4000 x 2500 mm. The modern design of the laser guarantees many processing possibilities, thanks to the fact that it is equipped with two automatic sheet metal loading tables, a cutting chamber, a large LCD screen, and extensive equipment. Laser technical parameters: - two automatic feeding tables: 4000 x 2500 mm - cutting working surface: 4000 x 2500 mm - closed, illuminated cutting chamber, with strong gas extraction - HD cameras for viewing in the cutting chamber and external viewing of loading tables - a closed container with a control  ...

The PRIMA POWER PLATINO 1530 laser was produced in 2012 by the Italian company Prima Power. Technical parameters: – machine time worked: 24800 hours – power: 2500.0 W – CNC control: Primach 20L – X travel: 3000.0 mm – Y travel: 1500.0 mm – working area: 3000 x 1500 mm – maximum sheet length: 3000.0 mm – maximum sheet width: 1500.0 mm – maximum sheet thickness: 15.0 mm – maximum load on the table: 250.0 kg – machine length x width x height: 12000.0 mm × 6000.0 mm × 3000.0 mm – machine weight: 12000.0 kg Rofin Sinar DC 025 CO2 laser specification – type: CO₂ – laser: Rofin Sinar DC 025 – power: 2,500 Watt – power stability: + -2% FS – wavelength: 10.6 µm – gas type: He 67.7%; CO2 4.1%; N2 28.2% – beam propagation factor M2: 250 microseconds, 70 used resolutions – positioning accuracy: + -150 radians – operating condi ...

The press brake HAMMERLE BM 200-3100 press brake was built in 1996. The folding machine was serviced regularly. Technical parameters of the press: - control: INFINITRON - number of NC axes: 11 - pressure: 200 tons - bending length: 3100 mm - working stroke: 400 mm - distance between the body walls: 3240 mm - maximum distance between the table and the bumper: 965 mm - voltage: 3 x 400 Volt - control voltage: 24 V = - total power: 28 kW - deflection arrow compensation - total machine width: 4400 mm - total height of the press: 3400 mm - weight of the press: 16 600 kg

Sheet metal profiling line was built in 2017. Equipment: – profiling machine – guillotine – control system – hydraulic press with an aggregate  ... more information

The laser BYSTRONIC BYVENTION 3015 was manufactured in 2009 in Switzerland. The laser cutter is equipped with two cutting heads: 5 and 7.5 inches. Technical parameters : - laser source power: 2200 W - punching machine hours: 17487 h - 2 cutting heads: 5 and 7.5 inches - maximum size of the processed sheet: 3000 x 1500 mm - maximum cutting thickness, black steel: 8 mm - maximum cutting thickness, stainless steel: 6 mm - maximum cutting thickness, aluminum: 4 mm

Laser cutting machine ECKERT DIAMENT FIBER 2 KW built in 2011. The machine worked for 2 years in one shift. Technical data of the laser cutter: - power: 2 kW - source: IPG - cutting head: Precitec - man hours: 8200 h - maximum cutting thickness, black steel: 12 mm - maximum cutting thickness, stainless steel: 8 mm - maximum cutting thickness, aluminum: 8 mm Machine equipment: - 2 exchangeable tables, dimensions: 1500 x 3000 mm - cooling system - filtration ventilation: the possibility of "return" of purified air to the hall or venting outside - additional software: Lantek Expert, used for nesting parts for cutting, allowing for the most effective use of material - an additional camera system that allows you to monitor the operation of the machine

Plasma-gas cutting machine ECKERT JANTAR 2 was produced in 2007. Technical parameters: – CNC control: ECS 859 – table: 9 sections, 1.62 m long each – table width: 3.2 m – table length: 14.58 m – number of slides: 3 – possibility of communication with a computer – possibility of plasma and gas cutting – 2 Harris gas burners – plasma cutting thickness: 8-10 mm – gas cutting thickness: up to 90 mm – power supply: 230 V – rated current: 12 A – plasma aggregate: PA-S45W

The profile perforating machine INTESO S3130T was manufactured in 2011 in the Czech Republic. Technical parameters: - Maximum internal diameter of the sheet metal coil: 80 mm - Maximum length of the finished product: 3000 mm Technical data : - screen control panel: SIEMENS - maximum length of profiles: 3000 mm - maximum cross-section of perforated profiles: 120 x 80 mm; fi 80 mm - automatic linear feed - optical sensor for automatic control of the correct length of the part - linear positioning of the hydraulic cylinder stroke - non-deformation perforation technology - the possibility of perforating profiles of various shapes - memory of perforation programs - two-sided perforation (in one operation) and one-sided perforation - automatic lubrication - maximum pressure of the hydraulic press in the line: 147 kN (15 tons) Tool accessories for the INTESO S3130 T punchin ...

Laser cutting machine BYSTRONIC BYSPRINT FIBER 3015 built in 2014. The machine is equipped with ByLoader for loading sheet metal. Technical specifications : - laser type: FiberLaser - power: 3 kW - activation time: 38752 h - cutting time: 19591 h - automation: ByLoader 3015 - automatic sheet loading - adjustment range: 300-3000 W - wavelength: 1060-1080 nm - nominal size of sheet X, Y, Z: 3000 x 1500 x 70 mm - maximum workpiece weight: 750 kg - table change time: approx. 35 s. - positioning deviation: + - 0.1 mm - positioning spread: + - 0.05 mm - edge detection accuracy, capacitive detection: + - 0.50 mm - accuracy of edge detection with CutControl: + - 0.15 mm - accuracy of optical edge detection using Detection Eye: + - 0.15 mm - maximum parallel positioning speed X, Y, Z axes: 100 mm / min. - maximum simultaneous positioning speed of the X, Y, Z axes: 140 mm / min ...

Laser engraving machine with 30 watts of laser power - Laser source 30 watt CO2 metal tube Demonstration machine, with minimum operating hours (approx. 10 hours) - incl. Windows 10pro 64-bit PC system - incl. 22" screen - Everything is fully installed and adjusted - Engraving software in German - Very easy to use - Switch on and get started - Co2 laser source with 30 watts for high-contrast and fast markings with extremely high resolution - Deep engraving possible - Wobble function - For engraving on e.g. wood, plastic, anodised surfaces, etc. - Heavy industrial quality - Complete system / ready for immediate use - Working space approx. 500 x 600 x 600mm (lxwh) - Clamping surface with mounting threads in 50mm increments - LED work area lighting - 50mm pipe connection for smoke extraction - Engraving area approx. 180 x 180mm - Expandable up to approx. 3 ...

Laser engraving machine with 60 watt laser power used demonstration machine - with minimum operating hours (approx. 20 hours) - 60 watt MOPA laser (enables colored laser engraving on stainless steel) - incl. 4th axis (rotary unit) - incl. Windows 10pro 64-bit PC system - incl. 22" screen - Everything is fully installed and adjusted - Engraving software in German - Very easy to use - Switch on and get started - Fiber laser source with 60 watts for high-contrast and fast Markings with extremely high resolution (see pictures) - Depth engraving up to 4mm possible (also in hardened steel) - Wobble function, e.g. for cleaning metal components - for engraving on many metals (stainless steel, brass, aluminium, etc.) and a lot of plastics - Heavy industrial quality - Complete system / ready for immediate use - Working space approx. 500 x 600 x 600mm (lxwh) - Clampi ...

Inv. Num. : 7570 Type: TruMatic L 3030 Producer: TRUMPF Created: 2001 Parameters: Laser power: 1800 W Work table length: 3000 mm Work table width: 1500 mm Maximum sheet thickness when cutting: 20 mm Feed length X-axis: 3000 mm Y-axis feed length: 1500 mm Feed length Z-axis: 115 mm  ... more information

Inv. Num. : 7597 Type: Bylaser 2200 M Producer: Bystronic Created: 2006 Parameters: Laser power: 2.2 kW Work table length: 3000 mm Work table width: 1500 mm Machine weight: 1100 kg  ... more information

Inv. Num. : 7613 Type: QOPJ 250/ 1400 Producer: SMERAL Created: 1990 Parameters: Maximum sheet metal plate width: 250 mm Maximum sheet thickness: 2 mm Machine weight: 577 kg  ... more information

Inv. Num. : 7569 Type: Aquacut 4001.20 Producer: Microstep Created: 2004 Parameters: Work table length: 4000 mm Work table width: 2000 mm High Pressure Pump: STREAMLINE SL-IV 50 hp  ... more information

Catalog No. : 7614 Type: Kompakt 1500/3000 Producer: VANAD Made in: 2015 Characteristic: Laser power: 2 kW Length of the working table: 3000 mm Width of the working table: 1500 mm Maximum thickness of the cut sheet metal (Stainless Steel): 12 mm Maximum thickness of the cut sheet metal (Aluminum): 6 mm Equipment: Filtering system Compressors Software

Inv. Num. : 7538 Type: CNC HAP 4200 Producer: ERMAK Created: 2008 Parameters: Control System: Delem DA-GGW Compressive force: 200 t Maximum bending length: 4100 mm Machine height: 3050 mm Machine length: 5150 mm Machine width: 2250 mm Machine weight: 15000 kg  ... more information