subcategories
(3rd category level)
Manufacturer:
(Category: 107)
Type: RG 206 Bending length: 6,000 mm Capacity: 200 ton Stand size: 5,500 mm Tools: Amada tools Machine weight: 22,000 kg Equipped with: - AMADA bending plant evidence - control pedal - emergency from ... more information
pressure: 0160 tchamfer lenght: 5120 mmdistance between columns: 4050 mmControl: konv. throat: 300 mmtable width: 200 mmstroke max.: 200 mmdayligth: 400 mmfeed down: 50 mm/secfeed up: 100 mm/secfeed under pressure: 5 mm/sectotal power requirement: 11 kWweight of the machine ca.: 16 tdimensions of the machine ca.: 5,4 x 1,75 x 3,3 mMachine will be supplied with many tools.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Press force: 400kN, stroke rate: 100-1200H/min, stroke adjustment: 13mm/15mm/19mm/25mm/32mm/38mm/44mm/51mm/57mm, max. fixed stroke: 57mm, ram adjustment: 57mm, installation opening: 690mm, max. belt passage width: 190mm, belt running height: 60mm-140mm, bed opening: 640mm-220mm. Dimensions X/Y/Z: approx. 3000mm/2200mm/1700mm, weight: approx. 6100kg. Documentation available. On-site inspection is possible.
The slot line comes from the Italian brand Reac. 1980 model It enables cuts of 4.00 mm thick and 1100 mm wide. maximum roll weight 10-12 tons. ... more information
Roller leveler VEB BLEMA GOTHA Germany Strip max thickness 6 mm, max width 1650 mm 7 + 8 work rolls, diameter 110 mm, 3 rows of supports with hydraulic setup, hydraulic unit included 27 kW AC main motor very good condition, complete and ready for operation, still on foundations in our plant ... more information
Working width: 3000mm, max. sheet thickness: 15mm, with digital display of roller adjustment, driven rollers, mobile control panel, cone bending device, upper and lateral cylinder support device. ... more information
Max pipe Ø: 60,3 x 3.2 mm maximum bending angle: 180 ° PIN length: 3000 mm Electr. Supply: 380 V, 8.6 kW space: 2400 x 5700 x 1500 mm weight: approx. 2500 kg ... more information
plate thickness: 4 mmblade length: 250 mmangle adjustable from - to: fest 90 Gradtable surface area: 900 x 800 mmtotal power requirement: kWweight of the machine ca.: 0,65 tdimensions: 1,2 x 0,9 x 1,1 mHydraulic notching machine- Footswitch- 2 pcs. sheet metal stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2500 mmplate thickness: 5 mmdistance between columns: 2600 mmtotal power requirement: 5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information
pressure: 100 tpunching cross-cut in cmm: -- stroke: 100 mmthroat: 510 mmwork height max.: 1100 mmTwist power: 31 Durchm. in 25 mmchannels - flange: 100-400 mmNumber of ventilators: 80-400 mm: 100-400 mm: 100-550 mmpunch stroke: bei 20 mm Hub: 60 p.Minsheet thickness max.: bei Luftbiegung: 10 mmtotal power requirement: 7,5 kWweight of the machine ca.: 2,4 tdimensions of the machine ca.: 1,7 x 0,9 x 2,3 mElectric 380 Volt: Diverse punches and dies: Foot pedal: Machinefeets: Machine dealer with own stock of 2500 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Description: STOLLBERG S151 AT wire winder no. 103138Approx. Onsite Dimension. (l x w x h): 2,500 x 1,100 x 1,800 mm, weight approx.: 1,500 kg ... more information
RASKIN RT 64-2 punching machine manufactured in Switzerland in 1981, is designed for precise punching of holes in workpieces made of e.g. stainless steel, with a force of 30 tonnes. Technical parameters of the RASKIN RT 64-2 punching machine - maximum press force: 30 t - CNC control - number of strokes: 400/min - power supply of machine RT 64: 3x 380 V; 50 Hz
EVG Complete mesh welding line - Max. Width mesh - 2.400 mm - Max. Length mesh - 6.000 - Wire diameter range – 4 mm - 12 mm - Max. speed - 70 strokes / min. -Longitudinal wire spacings 100 mm, 150 mm, 200 mm -Cross wire spacings 100 mm, 150 mm, 200 mm -Longitudinal and cross wiress are from piece. -The line is complete and still in working condition served by one man. -Machine can be seen in factory.
working width: 2520 mm for sheets up to: 2.5 mm Opening width upper cheek: approx. 250 mm Adjustability bending cheek: 30 mm Upper cheek drive: 1.5 kW Lower cheek drive: 2.3 kW electr. Connection: 380 V kW Weight: 2300 kg Space requirement: 3300 x 1400 x 1430 mm ... more information
Working width: 2500mm, max. sheet thickness: 20mm, lateral cylinder support device with three adjustable support rollers and conical bending device, machine provided for exchangeable top rollers up to min. Ø 450mm, machine revision 2009, factory inspection 2012. ... more information
Specifications: - working width 2540 mm - max. cutting capacity St 40 4 mm - mot. Cutting angle adjustment - Cut gap. by scaled adjustment screws - Number of hydraulic holders 14 pcs - Mot. backgauge with positioning. 10 - 1000 mm - Stroke rate depending on cutting angle and cutting length 23 per min - Hydraulic drive 400 V / 7.5 kW - Table height 1030 mm - Space requirement approx. W 2500 x H 1630 x D 2150 mm - Weight approx. 3600 kg - with: - Sheet metal holding pneum. supported - front angle stop + support arms - Electronic cutting depth adjustment - Cut line lighting - E-foot switch
Inv. Num. : 4970 Type: VS 310-6 Producer: Safan Created: 1981 Parameters: Maximum cutting length: 3100 mm Maximum sheet thickness when cutting: 6 mm Maximum cutting angle: 2 h Oil tank capacity: 150 l Total power requirement: 11 kW Back gauge: 1000 mm Machine weight: 6200 kg ... more information
Working width: 4100 mm sheet thickness: 16 mm projection: 300 mm rear gauge: 1500 mm power: 400 V, 45 kW space: 4800 x 3500 x 2600 mm weight: 28000 kg ... more information
Working width: 2000mm, weight: 1.65t. ... more information
plate thickness:3 mmtotal power requirement:4 kWweight of the machine ca.:0,85 tdimensions of the machine ca.:1,2 x 1,0 x 1,1 mNotching machine hydraulic ... more information