accessories for machine tools used for sale

Technical data - see signs and under HAWE Hydraulik Used for: - Clamping systems and tool magazines in lathes - Test bench construction .. suitable for: continuous operation, short-term operation, periodic intermittent operation ( Used device ! - no warranty )  ... more information

The NOVOTECNIC EUROPA FTD-6 E-39 oil mist separator was built in 1992. Technical parameters: - capacity: 2000 l - nominal filter capacity: 500 l / min - filter unit:> 0.003-0.005 mm - connection power: approx. 15 KW - machine dimensions (L x W x H): 4000 x 1200 x 2800 mm - weight: approx. 2000 kg

Round table probably Walter with a diameter of 380 mm.  ... more information

Inv. Num. : 7571 Type: M 3000 Producer: Samsys Created: 2007 Parameters: Maximum rod length: 1240 mm Rod diameter: 65 mm  ... more information

nv. Num. : 7572 Type: BOSS 322E Produzent: IEMCA Erzeugt: 2012 Parametern: Maximale Stablänge: 3200 mm Gewicht: 830 kg  ... more information

Inv. Num. : 5413 Type: SN 542 Producer: FEDEK Created: 2008 Parameters: Maximum bar length: 3000 mm Rod diameter: 42 mm Weight: 800 kg Length: 4000 mm Width: 1000 mm Height: 1500 mm  ... more information

Inv. Num. : 6118 Type: Liftmaster L3030 Producer: TRUMPF Created: 2002 Parameters: In good technical condition.  ... more information

Four-jaw lining ø 500 mm very good condition Spindle holder with base baking and top baking  ... more information

Power chuck øOuter 800mm • Centrifugal force compensation for high spindle speeds • Proofline® chuck = fully sealed – low maintenance STANDARD EQUIPMENT • Chuck: 1 set of soft attachment jaws, see picture • 1 compensating stroke regulating wrench • Low maintenance 6-jaw power chuck with 2+2+2 tension. The high-precision machining of thin-walled components. The 2+2+2 compensation mechanism of the chuck Enables the clamping of thin-walled components Clamping force to 6 points, reduces radial deformation. - Centrifugal force compensation for high speeds; -Low maintenance and other benefits The mounting flange is A2-KK15

1x VDI 40 steel bracket holder C4 C4-RC2040-51030 L= ; B= ; WeightG:= 3kg 2.2)58760 Cylindrical C4 adapter diameter 50x90mm 9x Inner Extractor Bracket 10x External Swivel Holder 3x outer piercing holder visible as far as possible 1) C4_R166_4KF-12060 Female Thread Swivel Holder 2) C4-B_SNR-27042-12 3) C4-R166.4FGZ-27050-16 External Rotary Bracket Right Triangular Plate : 4) C4-SDJCR-27050-11 External Swivel Bracket Right Triangular Plate 5) C4-DSSNR-27042-12 External swivel holder right 1x with plate, clamped from above 6) C4-SVJBR-27050-16 External swivel bracket right 1x with insert, Torx screws 7) C4-SDUCR-13080-11 Coro Turn Drill Rod, Internal Rotary Square Plate-Torx Sxamuk 8) C4-PCLNR-17090-12 Internal torque with clamping 9) C4-SVQBR 13090-16 Internal Rotary Holder Copy Plate 10) 3pcs C4-RF15.1230-G20-27050B & 27060B Cut-off holder sword Shipping costs on re ...

As good as new reversible base jaws Insert: Three-jaw chuck of parallel toothing, Manufacturers, for example: SCHUNK; SMW Autoblock Power chuck on request? Designation of the base jaws GBK-500; GBK500 (SMW-Autoblok-SCHUNK, BERG) for the construction of commercially available reversible, interchangeable jaws Three-jaw wedge rod chuck ø 500mm: KNCS 500 manual chuck; THW500 B= width; H height; L= Length; S=N_backe; N= cross groove for interchangeable jaws; La=hole spacing; Za = tooth spacing; S= Groove (top jaw) base jaw W = 45 mm H = 57 mm L = 160 mm N = 30mm S = 18mm La= 60mm Thread M16 x 1.5 Weight approx. 9-10 Kg /set Price on request:

3x SK40 Collet Holder ER40 1x SK 40 Collet holder ER 32  ... more information

As good as new reversible base jaws Insert: Three-jaw chuck with helical toothing, also power chucks. Manufacturer: Three-jaw chuck FORKARDT-F400; RÖHM-Duro-400→ (FOKARDT; ROHM; SCHUNK; KITAGAWA) Name of the base jaws: for example: MFG 400; SFG400 Three-jaw wedge rod chuck ø 400mm: Hand chuck F400; F500L DURO400; DURO 500 Rota-S 400; Rota-S500 THW500 F B= width; H height; L= Length; S=N_backe; N= cross groove for interchangeable jaws; La= hole spacing; J=Za= tooth spacing; S= groove for top jaw or base jaw W = 45 mm H = 55 mm L = 160 mm N = 30mm S = 18mm La= 60mm Thread M16 x 1.5 Weight approx. 9-10 Kg /set

Hand chuck three-jaw chuck FORKARDT, Type:FG315 Supplied with clamping flange Flange for milling or drilling table Three-jaw lining: cyl. Flange mount ø 300 mm, Bore diameter approx. 80 mm FORKARDT Basic Jaws FGB-315 with reversible top jaws. Mounting flange manufacturer FORKARDT DIN 55027 J6 Other DIN flanges on request The lining is cleaned and tested. Jaw guide, spindle and scenery stones are in good condition. Other clamping jaws are available on request. ( Option) Due to the weight, freight forwarding is required. Price within Germany incl. packaging approx. 100,00€

As good as new reversible base jaws Insert: Three-jaw chuck, helical toothing, Manufacturer for example: FORKARDT,RÖHM ,SCHUNK;,SMW-Autoblock Power chuck type on request? Designation of the base jaws FGB-630; FGB630 (FORKARDT) for the construction of commercially available, reversible, hard top jaws Three-jaw wedge rod chuck ø 6300mm: Hand chuck F630, Duro630; THW630 B= width; H height; L= Length; S=N_backe; N= cross groove for interchangeable jaws; La=hole spacing; Za = tooth spacing; S= Groove (top jaw) base jaw W = 65 mm H = 62 mm L = 230 mm N = xx mm S = 24mm La= 82mm Thread M20 Weight approx. 8-10 Kg /piece Price on request:

used, tested, good condition listed price / per holder Image: 8031 Absorbed SK 40 DIN 69871 with collet chuck ER 40 Manufacturer: DIEBOLD or KELCH Inside.- :Holder for ER 32 collets Outside.-: ø 65 mm nut for ER collets Length : 63 mm Supplied with tightening nut, with tightening bolt. Images 8032 Absorbed SK 40 DIN 69871 with collet chuck ER 32 Manufacturer: KELCH predominantly Interior holder for collets ER32 Outer diameter 60 mm Nut for ER collets Total length : 63 mm Delivery incl. 1 tightening bolt / tool. Image: 8031 Absorbed SK 40 DIN 69871 with collet chuck ER 40 Manufacturer: DIEBOLD or KELCH Inside.- :Holder for ER 32 collets Outside.-: ø 65 mm nut for ER collets Length : 63 mm Supplied with tightening nut, with tightening bolt. Images 8032 Absorbed SK 40 DIN 69871 with collet chuck ER 32 Manufacturer: KELCH predominantly Interior hold ...

Hand chuck three-jaw chuck FORKARDT, Type:315 Supplied with / without clamping flange Flange for milling or drilling table (option 150,00€) Three-jaw lining: cyl. Flange mount ø 300 mm, Bore diameter approx. 80 mm Included in delivery: short, modified FORKARDT base jaws FGB-315 with reversible top jaws. The mounting flange can be fixed on the milling or drilling table. Other DIN flanges on request The lining is cleaned and tested. Jaw guide, spindle and scenery stones are in good condition. Countertop jaws with clear signs of wear. Other clamping jaws are available on request. ( Option) Due to the weight, freight forwarding is required. Price within Germany incl. packaging approx. 100,00€

very good three-jaw chuck centrically exciting øA= 315 mm ø I= 100 mm cylindrical receptacle Chuck flange DIN 55027 on request incl. as good as new drill jaws Swivel jaws on request Forwarding or pick-up  ... more information

used-tested base jaws for three-jaw chuck - wedge rod chuck size approx. ø 315mm for power chucks on request Manufacturer: (FORKARDT-RÖHM-SCHUNK_KITAGAWA) Base jaws in good functional condition: Base jaw type: Helical toothing Metrics: Width: 32 mm Length: 125mm Height: F-groove: 12mm Bridge: 26mm Hole spacing: 54mm Thread: M12 x 1.5 mm Weight / per set: 3.5kg Supplied with or without screws There are several sets in stock. (New or tested-used)

used-tested base jaws for three-jaw chuck - wedge rod chuck size approx. ø 250mm for power chucks on request Manufacturer: (SMW Autoblock; SCHUNK; KITAGAWA; REISHAUER) Base jaws in good functional condition: KNCS250; QJ310; RHU250; THW; Schunk-Rota G250 Base jaw type: Helical toothing Metrics: Width: 26 mm Length: 104mm Height: F-groove: 12mm Bridge: 20mm Hole spacing: 40mm Thread: M12 Weight / per set: 3.5kg Supplied with or without screws There are several sets in stock. (New or tested-used)