- (5)
- Accessories (58)
- Angle Heads (17)
- Angle Tables (5)
- Bar Feeders (7)
- Bar Loaders (29)
- Boring Heads (9)
- Boring Spindle Units (1)
- Boring Spindles (7)
- Chip Conveyors (25)
- Circular saw blades (1)
- Clamping Angles (9)
- Clamping Cubes (17)
- Clamping Plates (75)
- Clamping Tables (20)
- CNC Control Systems (21)
- Collet chuck suspensions (2)
- Compressors (6)
- Control Systems For Machine Tools (2)
- Coolant Reservoirs (18)
- Cooling Units (7)
- Cross Slides (3)
- Dividing Units (15)
- Drilling Cube Tables (1)
- Dust extractors (2)
- Dust vacuum devices (2)
- Electrical (6)
- Electro Magnetic Clamping Plates (2)
- Exhaust extraction systems (15)
- Extraction systems for smoke (1)
- Faceplates (16)
- Facing Heads With 1 Or 2 Facing Slides (3)
- Feed Units (10)
- Feeds (6)
- Fine Boring Units (1)
- Flat surface grinding wheels (2)
- Grinding Discs (5)
- Grinding Spindles (5)
- Handling Units (2)
- Hydraulic Materials (2)
- Hydraulic Power Units (16)
- Indexing Table Units (1)
- Indexing Tables (4)
- Industrial extraction units (2)
- Lathe Chucks (13)
- Machine Tool Accessories (21)
- Machine Vices (19)
- Magnetic Clamping Plates (14)
- Magnetic Plates (5)
- Marking Plates (45)
- Measurement Technology (36)
- Measuring Plates (11)
- Milling Devices (7)
- Milling Spindle Units (5)
- Milling Spindles (8)
- Miscellaneous (4)
- Nebula withdrawal systems (2)
- Plate Fields (3)
- Precision vices (2)
- Presetters (1)
- Pump Units (4)
- Reciprocating Compressors (3)
- Refrigerated air dryers (1)
- Round Tables (20)
- Sensors (13)
- Servo Motors (1)
- Side Frame Units (2)
- Special sanding disks (1)
- Spindles (2)
- Straightening Plates (2)
- Tapping Units (2)
- Tension Bolts (1)
- Three-Jaw Power Clamping Chuck (5)
- Tool Cabinets (13)
- Tool Holders (43)
- Tool Trolleys (5)
- Turn-Round Units (2)
- Turning Spindle Units (1)
- Units For Machine Tools (7)
- Vacuum extraction units (6)
- Vibration Pots (1)
- Vices (62)
- Water Chillers (7)
- Welding fume exhaust systems (1)
- Workpiece Conveyors (7)
- more
- A + B (4)
- A+B KREUZTISCH (1)
- Aalenbach (5)
- ABA (1)
- ABB (2)
- ABW (1)
- ACME (1)
- AFS (1)
- AGIE (1)
- AIGNER (1)
- AKIRA SEIKI (1)
- ALBA (1)
- ALBERTI (1)
- ALIGN (3)
- ALLEN (5)
- ALLMATIC (12)
- ALLWEILER (1)
- AMEC (1)
- AMUTIO-CAZENEUVE (1)
- ANAG (1)
- APS (1)
- ARNO (2)
- ARNOLD (2)
- Arnold Müller GmbH (2)
- AROWA (1)
- ASEA (1)
- ASMUT (1)
- Asquith (5)
- ASSFALG (1)
- ASSORTS (6)
- Atlas Copco (11)
- ATLAS-COPCO (1)
- ATMH (1)
- ATS (5)
- AUFSPANNPLATTE (1)
- AUFSPANNSCHEIBE (1)
- Aufspannwinkel (4)
- AUTOWELL (4)
- AVC (2)
- AWB (1)
- BAKKER MADAVA (1)
- BALLUFF (1)
- BANTLEO (1)
- BARLOUT (1)
- BATTENFELD (1)
- BAUER (1)
- BAUMER (1)
- BBC (1)
- BECKER (1)
- BEHR (1)
- BEISSBRATH (1)
- BENZ (1)
- BERARMA (1)
- BERG (2)
- BERNARDO (2)
- BETA (6)
- BEWO (1)
- BIAX (1)
- BIELE (1)
- BIGLIA (1)
- BISON (7)
- Black Steel (2)
- Blis (2)
- BMF (1)
- BMS (1)
- BMT (2)
- Boehlerit (4)
- BOGE SOLIDBASE (1)
- BOHLE (3)
- BOLEY (1)
- BOMAR (1)
- BONANOMI (1)
- Bosch (2)
- Bosch/Rexroth (13)
- BRAMMER (1)
- BREUNING IRCO (1)
- BREUNING-IRCO (1)
- BRIDGEPORT (1)
- BRINKMANN (1)
- BROTHER REGOFIX (1)
- BRUCKNER (1)
- BRUDERER (2)
- BSI (1)
- BUECHE (1)
- Busch (2)
- BÜCHE (1)
- BüRENER MASCHINENFABRIK (1)
- C.STIEFELMAYER (1)
- CAPTO (1)
- Carl Zeiss (3)
- Carl Zeiss Jena (2)
- CARMITECH (1)
- CASTROL (1)
- CEKABA (1)
- CEPA PADBERG AS 5 Y (1)
- CHICK (1)
- Chinoise (10)
- CKD (1)
- CLARCKSON (1)
- COGNEX (1)
- ... more
subcategories
(3rd category level)
Manufacturer:
(Category: 110)
used
Hand chuck three-jaw chuck FORKARDT, Type:315 Supplied with / without clamping flange Flange for milling or drilling table (option 150,00€) Three-jaw lining: cyl. Flange mount ø 300 mm, Bore diameter approx. 80 mm Included in delivery: short, modified FORKARDT base jaws FGB-315 with reversible top jaws. The mounting flange can be fixed on the milling or drilling table. Other DIN flanges on request The lining is cleaned and tested. Jaw guide, spindle and scenery stones are in good condition. Countertop jaws with clear signs of wear. Other clamping jaws are available on request. ( Option) Due to the weight, freight forwarding is required. Price within Germany incl. packaging approx. 100,00€
used
very good three-jaw chuck centrically exciting øA= 315 mm ø I= 100 mm cylindrical receptacle Chuck flange DIN 55027 on request incl. as good as new drill jaws Swivel jaws on request Forwarding or pick-up ... more information
used
used-tested base jaws for three-jaw chuck - wedge rod chuck size approx. ø 315mm for power chucks on request Manufacturer: (FORKARDT-RÖHM-SCHUNK_KITAGAWA) Base jaws in good functional condition: Base jaw type: Helical toothing Metrics: Width: 32 mm Length: 125mm Height: F-groove: 12mm Bridge: 26mm Hole spacing: 54mm Thread: M12 x 1.5 mm Weight / per set: 3.5kg Supplied with or without screws There are several sets in stock. (New or tested-used)
used
used-tested base jaws for three-jaw chuck - wedge rod chuck size approx. ø 250mm for power chucks on request Manufacturer: (SMW Autoblock; SCHUNK; KITAGAWA; REISHAUER) Base jaws in good functional condition: KNCS250; QJ310; RHU250; THW; Schunk-Rota G250 Base jaw type: Helical toothing Metrics: Width: 26 mm Length: 104mm Height: F-groove: 12mm Bridge: 20mm Hole spacing: 40mm Thread: M12 Weight / per set: 3.5kg Supplied with or without screws There are several sets in stock. (New or tested-used)
New in: 2002
used
Euromate SCS + Coral PR/7.5 - Dust Extraction / Welding Fume Extraction Euromate SCS Air Filtration System - Air filter for welding fumes - 2 cartridge filters (need to be replaced) - Year of construction 2001 Coral PR/7.5 Extraction System - Motor power 5.5 kW - Speed 2800 rpm - Inlet diameter 400 mm - Year of construction 2002
New in: 2020
used
Aigner Air Jet 4 - Abrasive dust extraction Dry sanding of various materials often produces dust that is harmful to health. An effective solution for this is the use of an abrasive dust extractor. This device reduces dust emissions and helps to comply with the particulate matter limits: 5 mg/m³ in Austria and 1.25 mg/m³ in Germany. - Aigner Air Jet abrasive dust extraction - EC pipe extraction arm - Powder extinguishing system with detection line - incl. documents - Year of construction 2020 Specification - Max. air flow: 5000 m³/h - Max. pressure: 5000 Pa - Filter: 4x 13 m² - Dust: 10 g/m³ - Nominal power/current: 7.5 kW / 35 A - Nominal voltage: 3x 400 V - Net weight: 560 kg
used
New in: 2019
new
CNC lathe type 10"/ 250mm Recording A2-8" with soft top jaws, tails and bolts Max speed 2800 rpm Suit thread M60 ( Interchangeable ) ... more information
New in: 2018
used
Rapid Original TRM 350 Quick Release Holder type TRM350 Indexing 0.005 With 7 alternating necks 4 Pcs 201/350 34mm 1 St 202/350 Prima 32mm 2 Pcs 216/350 Diameter 50mm ... more information
New in: 2019
new
SK40 DIN 69871 Oil Feeder met Holder Weldon 40mm A= 65mm For internal cooling for rails without internal cooling through the spindle ... more information
New in: 2019
new
SK40 DIN 69871 Oil Feeder Weldon 32mm ... more information
New in: 2016
new
Electric automatic inclined bed filter Cloth belt filter Gravity fleece belt filter coolant preparation 1000 mm x 1760mm with circulation pumps For cleaning liquids, waste water emulsions Cooling lubricants of suspended solids and particles, with circulation pumps Manufacturer Seperatoren- Technik und Anlagenbau GmbH Year of construction: 2016 as good as new , unused Type: E-BF 150 BOM number 021966 Machine number: 16-0002 Container capacity: approx. 550 litres Operating voltage: 3x400 V Frequency: 50 Hz Pre-fuse: A 16 max throughput: (I/min) 150 Control voltage I (V)24 DC Weight: approx. 400 kg Length: approx. 2760 mm with control cabinet Width: approx.: 1100 mm Height: approx.: 1020 mm with control cabinet Non-woven tape roll width: approx:1000 mm Non-woven tape roll Length: approx: 1760 The filter is used to clean liquids. The liquid to be cleaned run ...
used
Dividing Head LOEWE - Round table: 360° - Round axis diameter: 400 mm - Space requirement (W x D x H): 0.7 x 0.6 x 0.2 m - Weight: 240 kg - Condition: good ... more information
used
- Granite top T/W/H: 750/ 500/ 20.5 mm - Aluminium plate B/D/H: 750/ 500/ 40 mm - Space requirement (W x D x H): 0.75 x 0.5 x 0.805 m - Machine weight: 370 kg - Condition: very good Details Measuring table or laboratory table with a granite plate and an aluminium plate with base frame glued to it, aluminium plate with threaded holes M8, hole spacing 50 mm
used
Multifix steel holder head Manufacturer MIVESA - the original Size C Location hole for Multifix on the support, diameter 23 mm Weight: 11 kg Very good condition ... more information
New in: 2012
used
- Load capacity: 27 kg - Machine weight: 100 kg - Space requirement (W x D x H): 1.1 x 0.25 x 0.5 / 0.6 x 0.5 x 0.67 m - Condition: very good Details Gripper for tools or other parts. The part weight can be adjusted for lifting/lowering. Functions: Lifting/Lowering, Gripping, Swivelling Gripper holder 0.42 x 0.5 m Accessories no other accessories
New in: 2010
used
VNr. A57408/00 -Centrifugal pump 4 m3/h, 400 V, 5.5 kW ... more information
used
Machine spindle for belt drive and direct drive overhauled in 03/03 and no longer used original packing from GMN 2500 U/min serial no. 280217 used, in full function ... more information
New in: 2014
new
To be sold on behalf of a customer. Condition new. 4. Axis for CNC machine to program via control. Hydraulic. Heavy-duty design ... more information
used
4 pieces used leveling shoes L =37 cm x W = 22 cm set height as on the pictures is 10cm, the leveling shoes have at the top a approx. 20mm and at the bottom a approx. 7mm plastic support, ... more information