saws used for sale

Primutini Cut-Off Tape Saw Roll diameter 1300mm Roll width 140 mm Cutting width to the right and left of the Saw blade 150mm Cutting height max. 650mm Drive 30 kW ... more information

Raimann VarioRip with mechanization! Max. cutting width 310 mm Chain width 340 mm Max. passage width / inlet width 650 mm Max. cutting height with clamping flanges 110 mm Max. cutting height 100 mm Min. wood length with use of the printing board 410 mm Feed speed 5 – 35 m/min Engine power 37 kW Number of printing rollers 4 Saw blade diameter min. / max. 300 mm / 350 mm Weight 2,060 kg Dimensions length x width x height 1.75 x 1.75 x 1.87 m Working height 850 mm Zciesgbg Suction diameter 250 mm Required extraction speed 30 m/sec Required extraction volume 5,300 m³/h

PAUL recutting saw type s-900-L with a passage width 906 mm, Cutting width 180 mm. The feed is infinitely adjustable 0- 90 m-min. The saw motor has 110 kW. Saw blade diameter 550 mm at 2500 rpm. With automatic feeding, Spreiselabscheider double-lamellig with pull-out tapes ... more information

Mayrhofer cross-cut saw Capping height: 20 cm Total length: 7,8 Meter with 6 saws 6 x Motor 5,5 kW Type H90 0 pcs saw variable (+-20 cm) 3m saw fixed 4m saw fixed 4.5m saw fixed 5m saw fixed 6m saw variable (+- 20 cm) very good condition - immediately available from stock Location: Austria, 3525 Lugendorf

Cross-cut saw for strong wood, glue binder, cantilevered wood... Work path approx. 3m , Cutting height approx. 45 cm Circular saw blade 900x50 good condition little worked!  ... more information

CASOLIN tenosquaring machine model TSX3: – 3000mm steel trolley – protection suspended on the blade – tilting blade D=400mm max, 5.5 hp motor, with 3 speeds 3000-4500-6000rpm – engraver D=110mm, motor hp 0,75, 8000rpm – cutting width on rip fence 950mm – spindle moulder with shaft D=35 x L=170mm, engine hp 5.5 , with 4 speeds 3000-4500-6000-8000 rpm – weight approx. 1500 kg Machine not according to CE standards, for export

3 axis control with boom with digital display for inclination Sled with warranty Remaining warranty 4 years  ... more information

Three flywheels Diameter mm: 900  ... more information

Multi-blade saw Paul Type K 34 G – OU/1200 Specifications: • Working width (mm): 1200 • Total power (kW): 47.6 • Saw shaft top: 1 • Saw shaft bottom: 1 • 5 saw shafts: included • 1 wave car: included • various spacer rings • Top rollers: with PU rubber coating • Bottom rollers: corded • Machine was technically overhauled about 1 year ago by the company Paul

Automatic vertical panel saw PUTSCH MENICONI mod. SVP 950 A for sale motor power HP 7,5 blade diameter mm. 300 blade revolutions 5000 max cutting length mm. 5300 max vertical cutting height mm. 2200 max cutting depth mm. 80 pneumatic mobile frame aluminum supports with polyzene coatings and wheels Digital Vertical Dimension Reader digital reader horizontal dimensions Overall dimensions mm. 6550x1500x3000 EC

CATALOG NO. 6913 TECHNICAL DATA - track width 360mm - roller width 350mm - max disc diameter 350mm - disc hole diameter 80mm - max cutting height 120mm in advance: - pawls - pulling shaft, toothed - pawls - smooth sliding shaft - shaft with saws - sliding, pressure roller from down: - 2 sliding rollers in front of the table top - runner - pawls - caterpillar - central lubrication of the track - electric lifting of the shaft with saws - electric lifting of the body - smooth adjustment of the feed speed - feed motor about 2.5 kW - main engine 30kW - overall dimensions length/width/height 2500x2300x1900mm - weight about 4000 kg ADVANTAGES – Czech production – 2 sliding rollers in the top - used multi-blade - very good condition Net price: PLN 59900 Net price: 12882EUR Net price calculated according to the exchange rate of 4.65 PLN/EUR (with large ...

ORDER NO. 6591 TECHNICAL DATA - track width 450mm - shaft width 450mm - disc bore diameter 80mm - shaft diameter 60mm - min dial diameter 300mm - max dial diameter 400mm - max cutting height 250mm - max width of input material 860mm - min length of the workpiece 800mm in advance: - repellers - pulling shaft, metal pressed pneumatically - repellers - pulling shaft, metal, pneumatically pressed - pressure - shaft with saws - pressure - 2 pulling shafts, metal pressed pneumatically bottom: - metal roller, slip roller - guide - repellers - caterpillar - shaft with saws - caterpillar - smooth adjustment of the feed speed on the inverter 4-40m/min - main motors 2x75kW - feed motor about 3kW - electric body lift up/down 0.55kW - electric shaft adjustment with saws 2×0.18kW - central lubrication - diameter of the extraction connection 2x300mm  ...

Part Number 6481 TECHNICAL DATA - max disc diameter 350mm - disc bore diameter 30mm - shield cover - max cutting height 100mm - max cutting width 800mm - possibility of cutting at an angle in a vertical plane of +90°/-90° (arm travel or disc travel) - the ability to rotate the arm right / left - arm adjustment up/down - diameter of the extraction connection 60mm - 3kW motor - table top size 1100x1040mm - dimensions length / width / height 1550x1100x1600mm - weight 191kg ADVANTAGES – very good condition – used saw Net price: 7 900 PLN Net price: 1 816 EUR depending on the price 4,35 EUR (Prices may fluctuate with higher fluctuations)

Order No. 6712 TECHNICAL DATA - min. board length after formatting 800mm - max length of the board after formatting is 1300mm - max board width 270mm - max board height 70mm - max diameter of the disc 350mm - shield on the discs (serves as a pressure) - spindle diameters 60mm - length of spindles working part 260mm - main engine power 4kW - feed motor power 0.75kW - 2 feed speeds - dimensions of the table top 1820x15100mm - diameter of the extraction connector 2x100mm - overall dimensions: length / width / height 1900x1900x1400mm - weight 578 kg ADVANTAGES - Polish production - for processing a pallet board - used saw, very good condition Net price: PLN 14900 Net price: EUR 3311 Net price, calculated at the rate of 4.5 PLN / EUR (with greater fluctuations in the rate, the price may change)

ORDER NO. 6524 TECHNICAL DATA - track width 360mm - shaft width 350mm - max disc diameter 350mm - disc bore diameter 80mm - max cutting height 120mm - table top size 2040x840mm in advance: - ratchets - pulling shaft, toothed - ratchets - smooth sliding shaft - shaft with saws - slip shaft, pressure shaft bottom: - 2 rolls in front of the table top - guide - ratchets - caterpillar - central lubrication of the track - electric shaft lifting with saws 0.55kW - electric body lifting 0,55kW - smooth regulation of the feed speed - diameter of the extraction connection 140,125mm - main motor 45kW - overall dimensions L/W/H 3530x2220x2200mm - weight about 4000kg ADVANTAGES – Czech production – 2 slip rollers in the countertop – used multisaw – very good condition Net price: 62900 PLN Net price: 13978 EUR depending on the price 4,50 EUR  ...

Order No. 6720 TECHNICAL DATA - diameter of the main saw 500mm - 35mm spindle diameter - max cutting height 70mm - max material width 210mm - min / max length of the material before cutting 500 / 4000mm - pneumatic blade slide - diameter of the extraction port 100mm, 140mm - overall dimensions: length / width / height 2700x1200x1650mm + control - 3kW engine - feeding table with pull rollers - 0.37kW engine - overall dimensions: length / width / height 5100x900x1000mm - sorter with 4 pneumatic ejectors - 0.75kW engine - overall dimensions length / width / height 5500x1000x1050mm - constant feed speed - total weight 2245 kg - Italian production - original DTR + CE documentation - used machine, very good condition PRODUCT FEATURES The Cursal TRV 2200E 500 optimizer is designed for cross cutting of material. Truncated elements can be grouped according to their le ...

3200 cutting width 3200 Back Gauge  ... more information

Code: 0264 Brand: MARTIN - GERMANY Model: T 72/A AUTOMATIK - CE Standard 4-axis controlled panel saw with scoring unit for cutting wood panels, furniture, customised furniture, plastics, coatings, aluminium, etc. - CE Standard Technical data: Aluminium squaring carriage length mm 3700 Max blade diameter mm 500 F30 Cutting height mm 170 Cutting width mm 1250 Motor power Kw 7,5 N° 3 speeds rpm 2800/4000/5500 Blade inclination 0-45,5° Parallelogram cross table tilting from 2 sides, with Led display Parallelogram transverse table extension 4 Controlled axis : Blade lifting - Blade tilting - Parallel guide - Reference stop 3-axis electrically controlled scoring unit Motor Kw 0,75 Blade diameter mm 120 F22 Electric adjustment guard Clamping device for small parts "BESAUMFIX" Compressed air 6-7 bar Suction base diameter 120 mm Suction guard diameter 100 mm Overall ...

Code: 0261 Brand: CEMIL - ITALY Model: T 140 M - CE Standard Automatic cutting machine for wooden boards, packaging, window frames, wooden rods and various - CE Standard Technical data: Cutting capacity mm 500 x 140 Blade diameter mm 450 F30 Motor power Hp 7,5 Blade speed/min 3200 Infeed roller conveyor mm 1650 Outfeed roller conveyor mm 1250 Strong workpiece support stop Diameter of 2 suction ports mm 140 Compressed air 7 bar Overall dimensions of assembled machine mm 3500 x 1950 x 1600 h Weight kg 480

Glue binder cross saw Width 3200 mm (saw path) Saw blade diameter 900x50 Little worked !  ... more information