other machines and plants used for sale

Zeiss LM 100 large inspection microscope The microscope has been used in the electronics industry, in the production of touch screens  ... more information

- Payload: 6000 kg - For standard skips 4 - 7 m3 (see photo) - Motor: electric 400V 50Hz - For lifting and moving skips within the company site. (1 person, walk speed)  ... more information

Winterhalter Pass-Through Dishwasher GS 502 Energy Cost-effectiveness reinvented: GS 500 Energy With the GS 500 Energy, you minimize your operating costs. This is because the built-in Energy exhaust air heat recovery system significantly reduces energy consumption. In addition, it ensures a good indoor climate and protects the environment at the same time. Winterhalter offers the advantages of the Energy version in all machine series. The GS 500 series from Winterhalter offers exactly the right rack washer for your individual needs. The classics GS 502 and GS 515 are perfect for restaurants, hotels or smaller catering facilities. As energy-saving versions Energy or Energy+, you can also get models that are equipped with innovative energy recovery systems with the same washing performance. And for extreme capacity fluctuations or a generally higher throughput, there is the GS 500 Twi ...

Narda PMM L3-32 3-Phase LISN  This Narda PMM LISN is designed for measuring network inferences from the power supply of products. The L3-32 is suitable for measurements on 3-phase AC powered electrical and electronic equipment. Since the L3-32 is equipped with a 1-phase socket and supports up to 32A, it is suitable for most devices. This LISN also supports DC up to 60Hz. The equivalent V-network of 50 ohms || (5 ohms + 50μH) complies with all standards. In addition, the LISN is equipped with a switchable high-pass filter from 150 kHz - 30 MHz, which is suitable for performing measurements of interference in a frequency range other than the 9 kHz to 30 MHz supported as standard. The L3-32 is fully compliant with CISPR 16-1-2-2, VDE 0876, FCC Part 15 and MIL-STD 461F. It is also equipped with an artificial manual transmission. Specifications Frequency Range: 9 kHz - 30 MHz Ma ...

Busch MINK MM 1252 AV vacuum pump with 5.5 kW motor (flow rate 250 m3/h) Dry claw vacuum pump INDUSTRIAL VACUUM GENERATION – HIGH EFFICIENCY, LOW MAINTENANCE Busch MINK 1252 AV vacuum pump 250m3/h for CNC Significant energy savings compared to conventional vacuum generators, minimizing operating costs Almost maintenance-free operation Dry and contact-free operation Endurance Proven design for more than 200,000 vacuum pumps in operation Information: Vacuum pump: BUSCH MINK MM 1252 AV 250m3/h for CNC Ultimate pressure: 100hPa (mbar) Normal engine speed: 3000 min-1 ISO2151 Noise Level: 75dB(A) Weight: 240kg Zwnhrefr Dimensions: 101x51.5x45cm Gas inlet/outlet: G 2" / R 1" Motor: 5.5 kW 3 x 230/400 V, 50 Hz Speed: 3000 rpm Bg. 112M B5-250 IP 55 Inlet Side: G2 Check Valve Outlet side: Integrated silencer Inlet filter: with paper cartridge Technical Specif ...

BECKER VT 4.25 OIL-FREE ROTARY VANE VACUUM PUMP B0nnjc2quw Model: VT 4.25 Equipped with specially developed vanes, this oil-free vane pump is distinguished by its high abrasion resistance and extremely long service life. Due to the low consumption, there is also minimal dustiness, which is why the pumps in this series are perfectly suited for precise cleanroom cleaning processes. This innovation from Becker not only stands out because of its 100% oil-free operation, excellent performance and low energy consumption. In the area of sensitive vacuum, it also guarantees precise conduction of air with low pulsation. Becker guarantees the pumps a service life of 20,000 operating hours or a maximum of 3 years. Enhanced pump life also extends service life and can eliminate the need for frequent service visits, as costly pump failures are no longer an issue. SPECIFICATIONS: Power: 0. ...

The Becker KVT 3.140 oil-free rotary vane vacuum pump is a vacuum clamping system for CNC machine tables, designed for continuous operation at any pressure level. The KVT 3.140 is a direct-drive unit supplied with a high-performance TEFC electric motor. The Becker KVT has a reputation for being extremely quiet. It is ideal for applications where oil or water is undesirable. It uses long-life self-lubricating graphite composite blades for operation. Included: ▪ built-in inlet filter, ▪ safety valve, ▪ vacuum regulator. Hrwho8tby Additional info ADVANTAGES OF THE BECKER KVT OIL-FREE VACUUM PUMP Oil-free = no impurities. Quiet and cool operation. Compact design, small footprint. Low maintenance. Information: Dry, air-cooled Integrated suction filter Suction power: 129 m3/h Power: 4.0KW Rated voltage: 50Hz, 400V Dimensions: L=873, W=470, H=336mm We ...

The Becker KVT 3.140 oil-free rotary vane vacuum pump is a vacuum clamping system for CNC machine tables, designed for continuous operation at any pressure level. The KVT 3.140 is a direct-drive unit supplied with a high-performance TEFC electric motor. The Becker KVT has a reputation for being extremely quiet. It is ideal for applications where oil or water is undesirable. It uses long-life self-lubricating graphite composite blades for operation. Included: ▪ built-in inlet filter, ▪ safety valve, ▪ vacuum regulator. Additional info ADVANTAGES OF THE BECKER KVT OIL-FREE VACUUM PUMP Oil-free = no impurities. Quiet and cool operation. Compact design, small footprint. Low maintenance. Information: Dry, air-cooled Integrated suction filter Suction power: 129 m3/h Power: 4.0KW Rated voltage: 50Hz, 400V Dimensions: L=873, W=470, H=336mm Weight: 111kg ...

BECKER VT 4.25 OIL-FREE ROTARY VANE VACUUM PUMP B0nnjc2quw Model: VT 4.25 Equipped with specially developed vanes, this oil-free vane pump is distinguished by its high abrasion resistance and extremely long service life. Due to the low consumption, there is also minimal dustiness, which is why the pumps in this series are perfectly suited for precise cleanroom cleaning processes. This innovation from Becker not only stands out because of its 100% oil-free operation, excellent performance and low energy consumption. In the area of sensitive vacuum, it also guarantees precise conduction of air with low pulsation. Becker guarantees the pumps a service life of 20,000 operating hours or a maximum of 3 years. Enhanced pump life also extends service life and can eliminate the need for frequent service visits, as costly pump failures are no longer an issue. SPECIFICATIONS: Power: 0. ...

VACUUM PUMP 7,5kW 510m3 Becker SV 500/1 + Cartridge filter + non-return valve SIDE CHANNEL COMPRESSOR SV 500/1 SINGLE-STAGE VACUUM PUMP Side channel fan - ideal pump for MDF In addition, it is equipped with a non-return valve and an external filter with a cartridge. The SV 500/1 is a single-stage regenerative blower that offers high performance in a quiet, touchless environment. 100% oil-free and contact-free, these pumps are maintenance-free, highly efficient, and require only minimal maintenance. SIDE CHANNEL COMPRESSOR Side channel blowers generate vacuum or compressed air for a wide range of industries. In these blowers, the rotor rotates contactlessly, so they are maintenance-free and wear-free. Above the upper and lower parts of the impeller there are separate working channels, thanks to which it is possible to use a single-stage version of the device for high flow ...

MINK MV 0312 B Dry claw vacuum pump Dry claw vacuum pump BUSCH MINK MV 0312 B DRY VACUUM – QUIET, EFFICIENT AND COMPACT Quiet operation Low noise level thanks to state-of-the-art acoustic solutions, can be installed at workstations Efficiency State-of-the-art claw technology, low energy consumption, minimized operating costs, almost maintenance-free operation, efficient air cooling Compactness Small size SPECIFICATIONS: Nominal flow rate: 290 m³/h Ultimate pressure: 150 hPa (mbar) Nominal motor power: 5.5KW Nominal engine speed: 3000 min⁻¹ Noise level (ISO 2151): 69 dB(A) Weight (approx.): 300 kg Dimensions (L×W×H): 940 x 500 x 650 mm Gas inlet: G 2" Gas outlet: R 11/4" Dimensional Drawing Dry claw vacuum pump BUSCH MINK MV 0312 B Manufacturer's code MV 0312 B Pumping speed Air at 20°C. Tolerance: ±10% Markets & Applications Biogas P ...

Industrial vacuum cleaner on trailer approx. 3,5m³ volume Handbrake on rear axle  ... more information

SERAPID 12 T die cart built in Germany is an innovative vehicle of stable design, able to maximise production processes through the precise, safe and efficient lifting of dies or tools. All of this is due to an extremely efficient electric drive, reliable cylinders and rigid chain technology, which is an environmentally friendly alternative to traditional hydraulic systems. The SERAPID 12 tonnes die change cart also guarantees increased reach at maximum working speed, thanks to the capacious Hawker Perfect Plus batteries. The net weight of the machine is 5200 kg. Technical specifications of the SERAPID 12 T die lifting cart - maximum load capacity: 12000 kg - maximum lifting height: 2000 mm - minimum lifting height: 740 mm - lifting speed: 0-57 mm/s - travel speed: 2.7 km/h - chain stroke: 2500 mm - batteries: Hawker Perfect Plus - battery capacity: 48 V – 330 Ah - chain ty ...

SCHLEUNIGER WireTwister 3300 AD wire twisting machine built in 2016 in China offers unparalleled twisting performance, thanks to the use of high-quality components and high-tech solutions. The machine, designed for the production of twisted pair cables, is also very simple and convenient to use. The ends of the untwisted wires are simply loaded into the holders and the twisting head respectively. The SCHLEUNIGER wire twisting machine pulls the wire very accurately to the programmed position, after which the head twists the wires with programmable tension control. At the end of the process, the holders automatically eject the twisted pair into the integrated storing channel and the taker returns to its initial position. The SCHLEUNIGER WireTwister 3300 AD wire harness machine is brand new and originally packaged. The photos and video shown in the offer are for reference – they repres ...

ATMSolutions ATMS 2030 150W laser cutting machine was built in 2018 in Poland. Distinguished by state-of-the-art solutions and components, the machine is used for precision cutting and engraving of a wide range of materials, i.e. rubber, wood and leather. Its deformation-resistant design with a large, 3000 mm long and 2000 mm wide through-table makes it possible to achieve high working speeds while maintaining maximum stability. Axis movement is performed by a top-of-the-range drive system consisting of linear guides with ground tracks and linear carriages, which ensures the highest positioning accuracy. The professional LaserWork control software for operating the machine supports the most important file formats and works directly with the most popular graphics programs (CorelDraw, AutoCAD, etc.). The CO2 laser ATMS 2030 is offered with a wide range of equipment, including, among others ...

WJATECH WJA D096P A MA screen printing conveyor dryer built in Poland in 2020 is dedicated to the advertising industry, where efficient drying of prints on fabrics or textiles is required. Fast achievement of the right temperature and a conveyor belt with a large working space make the WJATECH screen printing dryer the best solution in this field. Technical specifications of the WJATECH WJA D096P A MA screen printing conveyor dryer - HMI panel: WEINTEK - main switch - power: 64 kW - working pressure: 6 bar - power supply: 3×400 VAC; 50 Hz - dimensions (L x W x H): 4500 x 2200 x 1700 mm - weight of machine: 900 kg

BOVONE BISELLATRICE 471 glass beveling machine was manufactured in Italy in 2012. The machine designed to meet even the most diverse customer requirements, proves ideal for the precise machining of even the smallest glass sheets with a thickness of up to 25 mm. Made from the highest quality cast iron, the body of the glass bevelling machine guarantees high reliability, efficiency and stability during the working process. Flat and oblique glass edges are ground using 12 grinding wheels (including felt, diamond and peripheral grinding wheels), the configuration of which enables operation at very high working speeds. The total weight of the machine is 4400 kg. Technical specifications of the BOVONE BISELLATRICE 471 glass bevelling machine - maximum glass thickness: 25 mm - minimum glass thickness: 3 mm - minimum glass dimensions: 35×35 mm, 25×500 mm - number of spindles: 12 - work ...

ELMETHERM 27 x 4.4 m furnace for plastic pipes was manufactured in 1997 in France. The furnace is used in the process of heating and shaping single-layer plastic pipes with a maximum wall thickness of 3 mm and a diameter from 8 mm to 35 mm. The workpieces are preheated in the machine’s heating pipes and then vulcanised and shaped at 168°C. At the very end, the plastic pipes are moved to a special cooling tunnel, where they are cooled with air at 42.8°C. Automated heat treatment of large quantities of workpieces is possible due to the use of conveyors in the machine that transport the workpieces between the different stages of the process. All functions, such as switching on heating or cooling, are controlled via the SCHNEIDER MAGELIS HMI touch panel. The gas furnace for moulding PA plastic pipes weighs approximately 35000 kg. Technical data of the ELMETHERM 27 x 4.4 m industri ...

SCHLOTTER Galvanotechnik galvanising line, manufactured in 1994 in Austria, is designed for professional electrochemical treatment on various types of workpieces. During the treatment, a special coating is produced which protects the workpieces from mechanical damage and corrosion. The SCHLOETTER Galvanotechnik galvanising line, characterised by its high reliability and low operating costs, is equipped with a modern control system, which makes it possible to control the ventilation system and to adjust parameters such as process time in the galvanising baths and heater on/off times. The galvanising and phosphating line is fully complete and ready for operation. Equipment of the SCHLOTTER Galvanotechnik automatic galvanising plant - tumbler trolleys (6 sets) - trolleys for suspension system (5 sets) - centrifuges (2 pcs.) - rectifiers (3 pcs.) - workpiece dryer - ventilation s ...

MACHINERY CO2 1610 WiFi 160 W laser was built by the Polish company Technologie CNC in 2019. The machine is designed for engraving materials made of glass, ceramics and marble, as well as cutting such materials as acrylic and plywood. The machining process is performed on a large work table with a length of 1600 mm and a width of 1000 mm, using a powerful CO2 laser, guaranteeing high cutting speeds as well as the highest precision and quality of machining. The laser engraving machine supports the most important graphic formats such as DST, PLT, BMP, DXF, AI and the most popular graphic programmes such as CorelDraw, AutoCAD or Photoshop. The installed WiFi module allows for wireless communication with the machine. Along with the MACHINERY CO2 1610 WIFI laser engraving machine, equipment is offered consisting of an unused knife table and rotary axis, a CW 5200 liquid cooler and a dust e ...