planing machines used for sale

Guiliet Profilier and Hobelautmat with Wepla heads Model: 220 KXR 220 Year built:1990 Condition: very good (used) MAX CROSS-SECTION 220 X 120 MM MIN CROSS-SECTION 30 X 6 MM ENTRANCE TABLE 2000 MM long. PLANING SHAFTS 40 MM Dressing shaft 5.5 kW right and left planing shaft combined 5,5kW Thickness planer shaft 5.5 kW WEIGHT APPROX. 1600 KG Cleaned, maintained and functionally tested. If necessary, we can gladly offer planing heads with continuous cutting edges.

Specifications: Planing width: 245 mm Planing depth: 0 - 4 mm Nominal stroke rate: idle 8500 1/min Cutting speed: 32.9 m/s Rated power consumption: 2300 W Weight: 13.2 kg Knife head diameter: 74 mm Universal motor: 230 V / 50 Hz  ... more information

SCM fs 52es SPIRAL Dressing thickness planer Planing width 520mm Spiral knife shaft Dressing table length 2250mm Planer fence 1500mm 90°-45° Machine Grey Cast Iron Tables 7 KW (9.5 HP) 400V 50 HZ Thickness table 850x520mm Passage of 3 / 240mm 4 feed speeds 5 / 8 / 12 / 18 m/min Dual folding system of the tables to the rear max. chip removal 5mm Speed 5000 min/1 1 extraction connection 120 mm Weight approx. 700 kg G&STÜ-5503502

Four-sided planer, model P 22 N, 2 sets of planer heads, reversible knife – strip planer knife, sound protection hood built in 85, Weight approx. 1500 kg Spindles: 4 Working width: 220 mm Working height 120 mm  ... more information

Four-way planer model P 23, five-shaft machine with groove bed, Shaft arrangement down/right/left/up/down, Number of planer shafts: 5 Planing height max.: 120 mm Planing width max.: 230 mm Dressing table length: 2,000 mm Feed power: 2.2 kW Feed speed: 5 - 24 m/min Speed: 6,000 rpm Spindle diameter: 40 mm Soundproofing hood good neat condition, year of construction 94, extraction distributor

WEINIG high performance planer Type Hydromat 22 BL (full checked!) Built in 1995 With safety hood and soundproofing cabin! Machine specifications: - Planing capacity 220 x 120 mm - Feeding, 8- 80 m/min, motor 18.5 kW Spindle layout: Bottom-right-Links Top - bottom, table rigid Bottom, table rigid, spindle prepared Top - bottom, table rigid, spindle prepared gap unit, consisting of 1 right and 1 left spindle 30 kW each (4500 rpm) incl. table roll, sliding roller, spray indentation and wedge dissipation 4 Roller pull-out Special printing and fittings for the production of top layer slats Feed (divider) for slats and pull-out tape

High-performance industrial planing machine In good condition, lots of accessories '  ... more information

High-performance planer With chamf device good condition 223 kW Year of construction 2003 Many spare parts  ... more information

Specifications Spindles: 2 Spindle arrangement: Bottom (5.5 kW) – Top (5.5 kW) Working width: 220 mm Working height: 120 mm Feed: 3 kW // 32 m/min Spindle diameter: 50 mm Jointer Counter bearings Short Parts Package ... more information

Weinig planing machine Product name: Planing machine Type: AF51 Manufacturer: Weinig Machine number: unknown Year of manufacture: unknown Condition: Used Technical details: - Total table length: 2,600 mm - Feed table: 1,380 mm - Removal table: 1,080 mm - Table height: 810 mm - Chip removal: 0 – max. 8.0 mm - Stop (L x H): 1,250 x 155 mm (obliquely adjustable up to 45° without scaling) - Planing width: 500 mm - 4-knife shaft with 4 strip planing knives - Suction nozzle: 160 mm - Power: approx. 3kW - Weight: approx. 750 kg - 4 knives installed with slight signs of wear - 1 piece Barkomat adjustment gauge - the engine and the knife shafts have been re-mounted - the table lips have been re-milled (approx. 8 mm slots) to reduce the noise level. minimize Machine dimensions/set-up dimensions (L x W x H): 2,600 x 1,350 x 810 mm Transport dimensions (L ...

ready for use m used Pre-dressing table for copper mill planing machines Total length 2600 mm Planing width 240 mm  ... more information

CATALOG NUMBER 6674 TECHNICAL DATA - max planing width 150mm - max planing height 130mm 7 spindles: 1) horizontal lower 150mm 3kW 2) vertical right 130mm 3kW 3) vertical left 130mm 4kW 4) horizontal upper 150mm 4kW 5) horizontal lower 150mm 3kW 6) vertical right 130mm 4kW - diameter of all spindles 35mm - all adjustable spindles up / down and right / left - from above, 4 pulling rollers, toothed - 4 rubber, pulling rollers from above - 2 clamps from above - electric adjustment of the planing thickness of 0.25kW - length of the introductory top 1970mm - central lubrication of the table top - smooth regulation of the feed speed - 1.5kW feed motor - diameters of the extraction ports 6x120mm - dimensions length / width / height 4000x1300x1600mm - weight about 3000 kg - German production - for 6 heads - used planer, very good condition Net price: PLN 36900  ...

CATALOG NUMBER 6651 TECHNICAL DATA - max width of the workpiece 220mm - max height of the workpiece 120mm - 4 spindles: 1) horizontal bottom 220mm 4kW 2) vertical right 120mm 4kW 3) vertical left 120mm 4kW 4) horizontal upper 220mm 5.5kW - all adjustable spindles up / down, right / left - diameter of the spindles 40mm - from above, 4 introducing rollers, toothed, including 2 double ones - from above, 1 pulling roller, smooth, rubber - rubber, pulling roller at the bottom - pneumatically pressed rollers - feed on cardan shafts - 1.1kW feed motor - 0.37kW lifting motor - electric adjustment of the planing thickness - length of the introductory top 1980mm - side pressure - smooth adjustment of the feed speed 8-16m / min - central lubrication - diameter of the extraction port 5x140mm - locked in the cabin - dimensions length / width / height 3400x1500x1700mm - wei ...

Order No. 6716 TECHNICAL DATA - max planing width 510mm - maximum planing height on both sides 190mm - maximum four-sided planing height 130mm from down: - guide rails - preliminary table, adjustable - smooth skid roller - 510mm planing shaft, 4-knife 5.5kW - 2 smooth, sliding shafts - adjustable rollers in the lower table top in advance: - pulling shaft, toothed - pressure - pulling shaft, toothed 2 pcs - pressure - 520mm planing shaft, 4-knife approximately 7.5kW - pressure - pulling shaft, smooth - pressure in the back: - side spindles 2 pieces - 1.right, vertical 130mm 4kW - 2nd left vertical 130mm 4kW - manual spindle feed - diameter of the spindles 40mm - adjustable spindles up / down, right / left - the axes are positioned alternately - side clamp 2 pcs - locking spindles - 2 types of feed speed + smooth about 3kW - diameter of the extraction conn ...

CATALOG NUMBER 5843 TECHNICAL DATA - shaft width 510mm - 3-knife shaft - shaft cover - length of the tops 2530mm - cast iron tops - both adjustable tops - cast iron guide adjustable at an angle - 3kW engine - dimensions length / width / height 2530x900x1000mm - weight 897 kg ADVANTAGES - Italian production - used planer - intended for professional use Net price: PLN 11500 Net price: EUR 2738 depending on the price EUR 4.20 (Prices may change with higher fluctuations)

Part Number 6393 TECHNICAL DATA - max width of the workpiece 200mm - max height of the workpiece 150mm - number of spindles 4: 1) horizontal bottom 200mm 5,5kW 2) vertical right 150mm 4kW 3) vertical left 150mm 4kW 4) horizontal upper 200mm 5,5kW - all heads adjustable up/down, right left - spindle diameter 40mm - spindle speed 6000rpm in advance: - pulling introductory shafts, toothed 6 pcs including 2 double - 1 pulling shaft, rubber bottom: - introductory shaft toothed, pulling, torsional in the lower table top - side pressure 3pcs - lead roller, pulling, metal, smooth - all pneumatically pressed rollers - length of the introductory table top 2130mm - table top adjustable up / down - central lubrication - electrical setting of planing thickness - lifting motor 1,1kW - smooth regulation of the feed speed on the inverter - feed motor 3kW - feed  ...

KUPFERMUHLE four-sided planer with additional table, multi-saw 600x200mm - after technical inspection - German production - DOUBLE-SIDED PLANING HEIGHT 200 mm - ideal for wet wood - electric height adjustment - double feed chain - additional preliminary table with a 340 mm head - additional material feed systems TECHNICAL PARAMETERS: planing width 600 mm cutting height on both sides planing height on four sides 200 mm 100mm power of vertical spindle motors 2 x 5.5 kW lower shaft motor power 7.5 kW upper shaft motor power 11 kW engine power of the first head 4 kW multi-saw engine power 15 kW adjustable vertical heads four upper pulling rollers three lower pulling rollers two receiving pull rollers 4 knives per shaft, shaft diameter 145mm six types of feed speeds 7 / 9 / 11.5 / 14 / 18 / 23 m/min 2 rows of anti-kickback pawls spindle diameter 40 mm disc  ...

WEIBERT WJ-D53 Thickness planer Planing width of 530mm n=5000min 4 knife shaft Tersa n=5000min Planer shaft D=125mm Max. chip removal of 8mm Passage height from 3-300mm Feed speed of 8 and 16 m/min. Motor for feed 1.5 KW (2 HP) Suction nozzle of 160mm Electronic height adjustment of the thickness table with display Machine table, planing shaft bearing block and table guide made of Cast iron! Numerical display of the planing height Long thickness table Motor 5.5KW 400V 50HZ G&WJ-D53

Weibert FS32 Dressing thickness planing machine Dressing thickness planer FS32 with spiral knife shaft Weibert FS32 Planer width: 320mm Spiral knife shaft Motor power: 4KW n=4500rpm, 400V Passage height: 4-225mm Professional stop Digital height adjustment WJ-300100 OPTIONS AT EXTRA COST: Slotted hole drilling device Wescott chuck 0-16mm Driving device Dressing table extension adjustable 750mm

Weibert FS 32 Dressing thickness planing machine Planer width: 320mm Planer shaft: 3-reversible knife shaft Motor power: 3KW n=4500rpm, 400V Passage height: 4-225mm Professional side stop WJ-300100 OPTIONS AT EXTRA COST: with professional dressing stop Slotted hole drilling device Westcott chuck 0-16mm Driving device Height adjustment digital Drive motor 4KW S1