grinding machines used for sale

Edge grinding machine Rehnen -new- Type: Junior R 1 with motor band oscillation with support table at the deflection roller Additionally included in the scope of delivery is an angular and miter stop Engine power 2.2 kW Tape speed 22 m/sec Grinding belt dimension 2280 x 150 mm Abrasive back wall 850 x 150 mm Grinding unit swivelable 90 - 180° Grinding belt tension pneumatic Table size 750 x 350 mm The top in heavy casting with built-in three-phase motor 380 V, 2.2 kW 2850 rpm The machine is equipped with built-in switch-plug combination; Motor circuit breaker and main switch according to VDE Dimensions of the abrasive belt rear wall 850 x 150 mm the abrasive back wall is glued with a graphite sliding surface Steel table adjustable in height by spring pressure Grinding belt dimension 150 x 2280 mm The machine is supplied with 2 pieces of grindin ...

Grinding machine for curved parts Molded part grinding machine Make Calmbach & Söhne Double-sided grinding of shaped parts Oscillating rubberized grinding rollers Workpiece thickness maximum 120 mm Workpiece width maximum 130 mm Engine strength 2 motors 1.5 kW each Oscillation electromotor 4 speeds Suction connection diameter 120 mm Includes 20 grinding belts grit 60 + 120 Dimensions 1200 mm x 1500 mm x H 1550 mm

Used disc grinding machine Manufacturer: Zimmermann Type FZ SZ 2 Diameter 600 mm, double-sided Year of manufacture 1991 Power 1.5 kW Speed 920 rpm. Weight approx. 315 kg Swivel table, with handwheel, scale and zero lock Table can be completely swivelled away for easier sanding sheet change With angle stop, cylindrical grinding device and operating instructions Item location: 59425 Unna The machine can be viewed under power. We will be happy to send you more photos by e-mail. A forklift for loading is available. Prior sale is reserved. It is possible to professionally examine the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition, is non-binding and has been shown to the best of our knowledge and belief. Errors are therefore reserved. The warrant ...

SPECIFICATIONS max. sanding length mm: 1200 08 Spindle Hp 3.0 01 Engine (hydraulic pump) Hp 3.0 02 Motor Hp 1.5 for rotating brushes Complete with loader Control via 01 copy device in the upper part of the machine Hydraulic drive  ... more information

Long belt sanding machine, veneer sanding machine, Specifications: Table width 2800 mm Grinding width 2500 mm Table depth approx. 2000 mm Sanding belt length 9500 mm Pressure lamellar belt length 10 mm x 7750 mm Sanding belt dimensions 150 mm x 9500 mm Belt speed 25 + 12.5 m/s Suitable for intermediate paint sanding Workpiece height 6 - 220 mm Grinding engine power 24 kW Total power 27 kW Machine dimensions approx. L 5000 x W 2300 x H 2400 mm Space requirement of the machine in width is 3500 mm Machine weight 2600 kg TOP condition, technical documentation, sanding belt.

Technical data: Anti vibration welded steel construction Continuous Kettennantrieb 86 mm wide, chain parts made of steel and plastic, self-lubricating bearings, shift on prismatic Guide Adjustable belt speed 5-25 m / min Minimum height work table 870 mm (adjustable) The top pressure unit with adjustable Ã? rubber wheels 60 mm ball bearing Lateral pressure unit with rubber wheels Ã? 40 mm ball bearing Working height min / max 10/100 mm Minimum length 50 mm Minimum width of 30 mm The maximum width 200 mm Feed motor power 3 kW 1 milling unit kW / 2,4 2800 RPM 4 grinding machines with oscillating engines of Leistunj per 4 x 1.7 kW 2800ot RPM Total power consumption 12.5 kW Maschinenewicht 3000 kg very good Zistand, factory tested CE

Long belt Sanders for intermediate lacquer sanding Technical data: Grinding width: max 2,300 mm, min. 200 mm Workpiece height 8-200 mm 1.Schleifbandmasse 100-120 mm x 9000 mm 2.Schleifbandmasse 150 mm x 9000 mm Pressure plate tape measures 10 x 7280 mm Speed 4-12.5 m / min Suitable for intermediate lacquer sanding Grinding motor power kW 10/16 Total power: 20 kW Machine dimensions approx. B 4590 x L 2344 x H 1640 mm Engine weight 2150 kg

SPECIFICATIONS: Working width mm: 1350 Sanding belt dimensions mm: 2620 x 1300 Configuration: I. Iron roller diameter 300 mm II. Hard rubber roller diameter 300 mm - hardness 80 shore III. Scotch Brite Brush Unit 02 Motors + power regulator KW 30 / KW 22 / KW 2,2 Complete with motorized conveyor belt mm: 3500 x 1300

For sale second hand sanding maschine steinemann. Up and down paper, super wide, 200kw. 1990 yc. Short used.  ... more information

Long belt grinding machine, roller spacing approx. 3000 mm  ... more information

2 grinding units 1 calibration roller 1 sanding roller  ... more information

TECHNICAL DATA: Working width mm: 400 Workpiece length min mm: 350 Thickness mm: 150 No 2 brushing units (Turnable) Total connection kW: 1,83 Weight Kg: 1200  ... more information

TECHNICAL DATA: Working width mm: 1600 No 2 side brushes Lengthwise brushing unit Horizontal brush Horizontal brush Brush roller (transversal) Weight Kg: 2500 Total power installed kW: 11  ... more information

SPECIFICATIONS: Max. machining width: 800mm Working height: 150mm Installed power Kw: 3.0 2 brushing units consisting of 4 counter-rotating brushes Ø250mm x 220 mm Transport carpet with speed control Controller  ... more information

TECHNICAL DATA: Working width mm: 1600 No 2 side brushes Lengthwise brushing unit Horizontal brush Horizontal brush Brush roller (transversal) Weight Kg: 2500 Total power installed kW: 11  ... more information

TECHNICAL DATA: Required space mm: 830 x 860 x H 1150 01 Vertical brush KW 0,37 Motion: right - left Weight Kg: 250  ... more information

TECHNICAL DATA: Working width mm: 400 Workpiece length min mm: 350 Thickness mm: 150 No 2 brushing units (Turnable) Total connection kW: 1,83 Weight Kg: 1200  ... more information

TECHNICAL DATA: Mm useful width: 1600 02 Incoming tilting side brushes Cross rotary brush group Horizontal brush group Horizontal brush group Cross brush roller group Weight Kg: 2500 KW installed power: 11 Complete with 1000mm "Italmeccanica" carpet  ... more information

Technical data: Total length mm: 19800 Working width: mm 1000 Working length mm: 6600x1000 Pass-through height mm: 100 Polishing discs: Yes Polishing discs for edges: yes Diameter polishing discs mm: 200 Vacuum table: Yes  ... more information

TECHNICAL DATA: Size of the table mm: 1200 x 700 Sanding belt width mm: 90  ... more information