window production machines used for sale

Dimensions (L,W): , mmWeight: ca. 90 kgadjustable height (yes/no): ja stroke: 300 - 800 mmsurface of working table: 1.700 x 1.500 mmtable width: max. 3.800 mm0: ca. 130 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

Number of machnines: 15 StkLoading meters, approx.: - mTotal weight, approx.: - kgCompany closure for wooden window construction--------------------------------------Machines will be available from August/September 2024.Pos. 1: Weinig, PFA 17N, built in 1967Four-sided planer, 6 spindles, chain drive, with glazing bead separation, with planing headsContinuous feed, working width 170 mm, working height 120 mmElectric height adjustment feed beam Pos. 2: MAPO Spu 180, built in 1992, finishing machine, mobile Pos. 3: Gubisch CW 2, built in 1998, angle system with return,with Leitz IV 68 wood, wood-aluminum, Gold IV 78 wood1 slot spindle, 3 profile spindles Pos. 4: Götzinger OBM, built in 1998 corner bearing and olive drilling machine,1 drill head Olive, 1 x drill head corner beari ...

Bore diameter: variabel mmNumber of heads horizontal: 3 St.Number of heads vertical: 4 St.Dimensions (L/W/H): 6100x1500x2300 mmWeight: 950 kg1 NEW drilling and milling center Götzinger Power Drill 300With the Götzinger PowerDrill you can, depending on the type and design:- Drill on the front and on the long side- Dowels of front doors, pegs, fighters- The drilling patterns are freely programmable- You can drill: handle slides and corner bearings, with quick-change multiple spindle- You can: Milling lock case, pusher and PZ as well as 3D belts and drill- The machine has a horizontal and a vertical milling unit- A simple control lets you create drilling and milling programs, save and call againBase frame in sturdy design, covered with sheet metalTable top 1800 x 200 mmProcessing unit:X-axis - 500 mm working travelY-axis - 0-120 mmZ-axis - 0-105 mm (above table)Horizontal aggregates:1  ...

Tenoning spindle: 2 St.Number of milling agregates: 7 St.Spindle diameter: 50 mmcontrol: Weinig, PC-Nexus Weinig Unicontrol 12with radial and axial CNC spindles as well as VARIO table and milling carriage Machine can be seen in use for a short time!Technical data summary(please inquire about any additional accessories included) crosscut saw > Electronic crosscut saw, horizontally infinitely adjustable> Number of tools: 1 piece.> Spindle speed: 2,800 rpm> Spindle diameter: 40 mm> Tool diameter max.: 400 mm> Motor power: 3.7 kW> Laser directional light to detect the saw section> Axial adjustment path 150 mm NC axis, electronically infinitely variable> Radial pneumatic adjustment path 8 positions for e.g. edge rounding from aboveRounding aggregate > Position: horizontally below> Motor power: 1.5 kW> Spindle diameter: 20 mm> Tool clamping length: 25 mm> Spindle speed: 9,000 rpm> Tool diamete ...

Number of motors: 2 Stück0: 2380 mmControl: , 0RUCHSER RU-GL-45°-----------------------------------------------------Glazing bead saw at the sliding work tableDeveloped for cutting glazing beads in pairs on the sliding work tableThe RU-GL glazing bead saw is mounted on a sliding work table withScanning and clamping device fortwo glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw stuckright saw on carriagemounted to be moved manually. Pneumatic clamping device from above and fromthe side, safety two-hand operation. Saw motors 0.37 kW, voltage 400V.Sliding work table with felt pad, length with side shelf 3300 mm,Width 1400 mm, working height 800 - 1000 mm. Pneumatically lowerableCounter bearing for positioning the wings.Pos. 1: RU-GL double glass bead saw 45° on the RU-SA-3000-----------------------------------------------------for glazing beads up to 30 x 70 mm (W x H) ! ...

Number of motors: 1 Stück0: 2500 mmControl: nein Single-sided glazing bead saw Hecht ES 300 A--------------------------------------swivels from 45° to 45° to fixed stopwith automatic feedpneumatic swivel overmanual swivel stopwith machine base, pneumatic tensionSaw blade HM 300 x 3.0/2.2/30 Z 80 Neg.Touch stroke 1.5 mSupport 1.5 m with supportKey stroke 3 mSupport extension from 1.5 m to 3 m with supportTable inserts grooved for rebated glazing beadsHECHT ASB manual length stop with digital display, 2500 mm(technical information according to the manufacturer - no guarantee!)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of motors: 2 Stück0: 2650 mmControl: , 0Ruchser RU-GLS-ED 45° glass bead saw--------------------------------------Developed for cutting glazing beads in pairsThe RU-GLS-ED45° double glazing bead saw must be adjusted to size manually. theMachine was designed for cutting glazing beads in pairs with acutting angle of 45° and features a fixed and amovable saw unit. The manual length adjustment is equipped withan electrical digital display. It can cut lengths from 240mm - 2650mmbe sawn. During the cutting process, the glazing beads with apneumatic clamping device clamped from above and from the front to prevent tiltingto prevent the glazing beads. Operation is via a safetytwo-hand operationItem 1: RU-GLS-ED45° double glazing bead saw-----------------------------------------------------with manual measurement, for the pairwiseCutting glazing beads, cutting angle 45°.Manual length  ...

cut-off saw: 3 KWSpindle diameter: 50 mmSpindle length: 300 mmNumber of tools: 3 St.connected load: 12 kWHaberkorn FZS 1 Studio tenoning and slotting machineMachine is still being checked------------------------------------------------------The compact tenoning and slotting machine forthe unusual window constructions.If you have the highest demands on a tenoning and slotting machineand easiest handling, you can meet them with the FZS 1 Studioright choice.This single shaft tenoning machine with 3 automatic tool positionscontributes to reducing downtimes through quick tool changes and aspecial swivel table for the production of studio windows and segments forArched window.The studio table developed for this purpose has special features that...enable rational work.Precise angle degree display via rotary encoder with 1/10 degree display. displayin the control panel.The splinter wood stays in ...

Number of motors: 1 Stück0: 2000 mmControl: manuel STRIFFLER glass bead saw 2733Miter cut 45 degrees with manual feed, pneumatic slot stopfor glazing beads with slots and tenons, manual length stop with scale.Self-dismantling and loading by buyerOR alternatively through us, then costs 50 euros(technical data according to the manufacturer - no guarantee!)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 3.700mm, 5.100mm, 6.100mm mmWorking height: 160 mm0: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

Working width: 4500 mmWorking height: 3000 mmNumber of cylinders: 6 St.Dimensions (L/W/H): 5600x1350x3550 mmWeight: 3000 kgS&S frame press Bavaria 2000 L---------------------------------With automatic pressing cycle + manual controlfor corner connections tenon+slots and dowel connection/caulked tenon,Can be changed via selector switch on the control cabinet.With basic equipment for optional use of counter profiles if the sash is onloose part can be folded over.CE versionBasic machine in the strongest welded frame construction,with thick-walled special hollow profiles.Guideways of the pressure beams for the press cornersin a low-abrasion machined version.Fast, smooth, manual width adjustmentthanks to ball bearing carriage, fixation in 50 mmHole grid, optional motorized width adjustment withwith hydraulic clamping (for an additional charge).Height adjustment and pressing using long-stroke  ...

Working width: 3648 mmWorking height: 2485 mmNumber of cylinders: 6 St.Maweg Euronova Quickomat frame press----------------------------with automatic measurement adjustment.Cylinder max. opened (maximum working dimensions)W 3,648mm x H 2,485mmTotal length: 4,720mm + 400mm control unitTotal height: 3,550 mm(technical information according to the manufacturer - no guarantee!)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. tool diameter: 400 mm: 180 mmoperating pressure: 2 barROTATHERM chamber washing systems are used in all areas of industry andCraftsmanship for cost-effective cleaning of a wide variety of items to be cleaned and materials used.The parts are cleaned like in a dishwasher. Inserted into oneWire mesh basket they are in the closed device with a hotLye shower washed from all sides. The machine will be selected after theTemperature and washing time set in operation. A centrifugal pump promotes theWashing water circulates to the nozzle system, which at the same time moves the basket in offset rotation. (Optional electric basket drive)After the cleaning process is complete, the device switches off automatically. the Parts can also be removed beforehand. In this case, when lifting thethe pump is automatically put out of operation.ROTATHERM chamber washing systems are available in various size ...

max. tool diameter: 400 mm: 310 mmoperating pressure: 2 barROTATHERM chamber washing systems are used in all areas of industry andCraftsmanship for cost-effective cleaning of a wide variety of items to be cleaned and materials used.The parts are cleaned like in a dishwasher. Inserted into oneWire mesh basket they are in the closed device with a hotLye shower washed from all sides. The machine will be selected after theTemperature and washing time set in operation. A centrifugal pump promotes theWashing water circulates to the nozzle system, which at the same time moves the basket in offset rotation. (Optional electric basket drive)After the cleaning process is complete, the device switches off automatically. the Parts can also be removed beforehand. In this case, when lifting thethe pump is automatically put out of operation.ROTATHERM chamber washing systems are available in various size ...

Length: 5000 mmWidth: 750 mmHeight: 3500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

max. workpiece length: 4500,6000 mmprofile spindle: 3 Stückmain drive: 24 kWControl: Siemens 840d Working Process Logos Life Evo XS 2345-------------------------------Vollautomatisches CNC-Fensterfertigungsanlage mit automatischerBe- und Entladung.2 Portale mit 3 Frässpindeln mit 4- und 5-AchstechnologieCNC-gesteuerter Manipulator für Werkstückpositionierung mit 16 Stück Doppelzangen8 Stück komplett unabhängige Werkstückspanner für höchste Felxibilität undProduktivität128 WerkzeugplätzeNEU:Working Process baut nun auch 1-spindlige Anlagen mit bewährter Technologie fürkleinere Betriebe!Nebenstehend finde Sie aktuelle Videos dieser Baureihe.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bore diameter: , mmNumber of heads horizontal: , St.Number of heads vertical: , St.SPINAMATIC mod. GLF-HP Dübeleintreibgerät mit Leimangabe für Fensterfertigung------------------------------------------------------ ----------komplett wie folgt :- Fahrbare Ausführung- Dübelzuführung zur Pistole wird durch SPS-Steuerung gesteuert.- 1 Wendelförderer zur Aufnahme von Dübeln mit 1 Zuführung- Leimanlage ist mit Hoch-Druckpumpe 10:1 und Sonderleimspritzdüse für Dickleim (Typ D3 oder D4-Einkomponent) augerüstet- pneumatische Pistole für Dickleim- und Dübeleinsetzen mit Ausrüstungen fürnur einen Dübeldurchmesser nach Wahl zwischen : 6 - 8 – 10 oder 12 mm.Dübellänge : min. 25 mm. – max. 60 mm.Tiefeinsetzen = 30 mm.Der Leim wird durch eine Sonderleimspritzdüse, die mit SPS-Steuerung fürelektronische Dosierung in Verbindung ist, gespritzt .- Flexibler Arm mit Gegengewicht zu ...

: 3000 Working height: 2500 mm: 300-800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

Tenoning spindle: 2 St.Number of milling agregates: 7 St.Spindle diameter: 50 mmControl: CNC, Weinig PC-Nexus Weinig Uncontrol 12with radial and axial CNC spindles and VARIO table.. The machine has already been professionally dismantled and stored in 73447 OberkochenSpecifications summary(please inquire about any additional accessories included).. crosscut saw.. > Crosscut saw electronically, horizontally infinitely adjustable> Number of tools: 1 pc.> Spindle speed: 3000-6000 rpm> Spindle diameter: 40 mm> Tool diameter max.: 400 mm> Motor power: 3.7 kW> Laser guide light for detecting the sawing section> Axial adjustment path 150 mm NC axis, electronically stepless> Adjustment path, radial, pneumatic, 8 positions, e.g. for edge rounding from aboverounding aggregate.. > Position: horizontally below> Axial adjustment path together with the crosscut saw.electronic length stop.. > Length 450 ...

Table dimensions: 1000,400 mmpneumatic clamping: 4 St.moveable: Option For fast compression of Minizinken- or Softline compoundsespecially for larger cross-sections- Independent of the angle- Especially suitable for arched manufacturing- Table size 1000 x 400 mm- Pneumatic connection 10 bar- Air consumption 1 cdm / stroke- 4 clamping cylinders for workpiece clamping- Pairs switchable- Right half of the table supported on hardened shafts through ball linearbearings- 2 pressure cylinder for linear table displacement, separately switchable- Weight: 200 kg- CE - execution(Technical details according to manufacturer - without guarantee.!)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.