Description: Mini crawler excavator, complete with digging bucket, electronic ignition, rubber tracks, rotating 360 degrees turntable, hoses and hammer drive. Never used 0 hours The color of the excavator may vary depending on availability (yellow, red, other)Approx. Onsite Dimension. (l x w x h): 1,200 x 3,000 x 2,500 mm, weight approx.: 1,100 kg

Description: Displacement: 62 cm³ Maximum torque: 10, 000 rpm Rated power: 1. 4 kW Fuel Mixing Ratios: 25:1 Vibration level: K=1. 5 m/s2, 12. 12 m/s2Approx. Onsite Dimension. (l x w x h): 600 x 400 x 400 mm, weight approx.: 10 kg ... más información

Description: Universal floating hydraulic mulcher SOLMEK BM-600, for excavators from 12 up to 50 quintals, floating mulcher, oil flow rate 30-80 liters per minute, cutting size 600 mm, pin diameter 30mm, never used, packaged in its original packagingApprox. Onsite Dimension. (l x w x h): 1,000 x 800 x 800 mm, weight approx.: 175 kg

Description: Untested / defects cannot be excludedApprox. Onsite Dimension. (l x w x h): 1,400 x 950 x 1,500 mm, weight approx.: 150 kg ... más información

Description: Lot consisting of accessories for JPC excavators: - hydraulic hammer - bucket 200 - bucket 800Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 500 mm, weight approx.: 100 kg ... más información

Description: Displacement: 62 cm³ Maximum torque: 10, 000 rpm Rated power: 1. 4 kW Fuel Mixing Ratios: 25:1 Vibration level: K=1. 5 m/s2, 12. 12 m/s2Approx. Onsite Dimension. (l x w x h): 600 x 400 x 400 mm, weight approx.: 10 kg ... más información

Description: Universal floating hydraulic mulcher SOLMEK BM-800, for excavators from 15 up to 80 quintals, floating mulcher, oil flow rate 40-90 liters/minute, cutting size 800 mm, pin diameter 40mm, never used, packaged in its original packagingApprox. Onsite Dimension. (l x w x h): 1,000 x 800 x 800 mm, weight approx.: 175 kg

Wheel loader mount, adapter frame, universal carrier-Wheel loader mount: adapter frame for forks, solid design-Inner mounting width: 680 to 730 mm-Mounting: shaft Ø 50 mm, dimensions see photos-Forks: can be supplied at an additional cost, large selection available-Dimensions: 1500/340/H660 mm-Own weight: 104 kg

Description: 2.9m dipper High and low flow lines 600mm offset skid 3m wide GROENEVELD automatic greasing system ENGCON S70 hydraulic attachment 3 fixed buckets (2m, 1.5m, 600mm) As is' condition Machine loaded on flatbed truckApprox. Onsite Dimension. (l x w x h): 9,728 x 3,000 x 3,440 mm, weight approx.: 21,900 kg

Description: High and low flow lines 3m dipperstick GROENEVELD centralised lubrication S80 ENGCON hydraulic attachment 1 bucket (1600mm) Overhauled machine Machine loaded on flatbed truckApprox. Onsite Dimension. (l x w x h): 10,080 x 3,180 x 3,675 mm, weight approx.: 36,200 kg ... más información

Backhoe bucket, excavator bucket, demolition bucket, trenching bucket, excavator bucket, mini excavator bucket-Excavator bucket: mini excavator bucket Stable design-Width: 245mm-Height: 400mm-Depth: 500 mm-Inner mounting width: 96 mm-Hole: bore Ø 25 mm, dimensions see photos-the holder on the spoon: can be changed by us for an additional charge-Transport dimensions: 400/245/H470 mm-Weight: 30 kg with pallet

Description: Narrow chassis 700mm offset skid 3m wide High and low flow lines 3m dipperstick GROENEVELD centralised lubrication S80 ENGCON hydraulic hitch 1 bucket (1600mm) Cummins engine Kawasaki pump Overhauled machine OPERATING MASS: 32264KG ENGINE POWER: 209kW Machine loaded on flatbed truckApprox. Onsite Dimension. (l x w x h): 10,667 x 2,990 x 3,225 mm, weight approx.: 32,265 kg

Description: 2.9m dipper High and low flow lines 600mm offset skid 3m wide GROENEVELD automatic greasing system ENGCON S70 hydraulic attachment 3 fixed buckets (2m, 1.5m, 600mm) Overhauled machine OPERATING MAS: 27000KG ENGINE POWER: 145 Kw Machine loaded on flatbed truckApprox. Onsite Dimension. (l x w x h): 10,290 x 3,000 x 3,255 mm, weight approx.: 27,000 kg

Description: Narrow chassis 700mm offset skid 3m wide High and low flow lines 3m dipperstick GROENEVELD centralised lubrication End of dipper (No attachment, no buckets) Overhauled machine MAX. OPERATING MASS: 27 300 KG ENGINE POWER: 140kW Machine loaded on flatbed truckApprox. Onsite Dimension. (l x w x h): 9,880 x 2,990 x 3,340 mm, weight approx.: 25,700 kg

Description: 2.9m dipper High and low flow lines 700mm offset skid 3m wide GROENEVELD automatic greasing system End of beam As is (scales will be reassembled for sale) Machine loaded on flatbed truckApprox. Onsite Dimension. (l x w x h): 9,490 x 2,990 x 3,005 mm, weight approx.: 22,100 kg ... más información

Description: Eurocode: D10C0015 woking hours/ km: 14300 serial number: 545556 location: Budaörs HungaryApprox. Onsite Dimension. (l x w x h): 2,520 x 10,000 x 3,210 mm, weight approx.: 20,000 kg ... más información

JPC HT12 brand mini excavator.Year of manufacture 2023, as can be seen in the pictures with engine oil pressure display and voltage display as well as hour counter.Serial number: MD202311084Co-op motor air cooledapprox. 1020kgL: 2.75mB: 0.925mH: 2.25m ... más información

Mini excavator FF Industrial ME18 with 980 kg dead weight.Digging depth 1.65mEngine 1 cyl. Air cooled with side control as in the pictures!Viewing and test drive are possible by appointment. ... más información

Minibagger JPC HT12!as in pictures with 40cm bucket ... más información

JPC HT12 brand mini excavator.Year of manufacture 2023, as can be seen in the pictures with engine oil pressure display and voltage display as well as hour counter.Serial number: MD202311076Co-op motor air cooledapprox. 1020kgL: 2.75mB: 0.925mH: 2.25m ... más información