- (10)
- Centres de elaboración de rectificado (4)
- Centros de conformación y rotación (10)
- Centros de elaboración (163)
- Centros de elaboración de fresado (10)
- Centros de elaboración del perfil (2)
- Centros de elaboración horizontales (41)
- Centros de elaboración universal (67)
- Centros de elaboración verticales (124)
- Centros de mecanización especiales (1)
- Centros de mecanizado CNC (294)
- Centros de mecanizado CNC horizontales (56)
- Centros de mecanizado CNC verticales (192)
- Centros de mecanizado de alta velocidad (HSC) (5)
- Centros de mecanizado de herramientas (1)
- Centros de procesamiento de portales (9)
- Centros de taladrado (4)
- Centros de taladrado de alta velocidad (HSC) (1)
- Centros horizontales de taladrado y fresado para piezas cúbicas (3)
- Centros verticales de taladrado para piezas cúbicas (2)
- Fábricas de perforación de bandejas (11)
- Fábricas de perforación de bandejas para apoyar las mangas (8)
- Fresadoras de taladro (33)
- Fresadoras universal (1)
- Mandrinadoras (56)
- Mandrinadoras CNC (26)
- Máquinas de machos de roscar (23)
- Máquinas de perforación manual (16)
- Maquinas de perforación profunda (32)
- Máquinas de perforaciones de semillas (1)
- Máquinas de punteo (9)
- Máquinas de punzonar (3)
- Máquinas de taladro de huecos largos (1)
- Mesas giratorias redondas (5)
- Obras de perforación en coordenadas (8)
- Obras educativas en perforaciones (4)
- Otras taladradoras (7)
- Otros centros de mecanización (12)
- Taladradoras (74)
- Taladradoras a batería (9)
- Taladradoras automáticas (28)
- Taladradoras automáticas de tambor distribuidor (1)
- Taladradoras de columna (184)
- Taladradoras de mesa (55)
- Taladradoras de montante (58)
- Taladradoras de precisión (2)
- Taladradoras de punto de centrado (2)
- Taladradoras de sobremesa (59)
- Taladradoras de vias múltiples (2)
- Taladradoras en fila (22)
- Taladradoras especiales (1)
- Taladradoras magnéticas (2)
- Taladradoras multihusillo (32)
- Taladradoras para agujeros profundos (11)
- Taladradoras radiales (93)
- Taladradoras radiales rápidas (13)
- Taladradoras verticales (1)
- Taladradoras verticales de coordenadas (2)
- Taladradoras verticales de plantillas (2)
- Taladradoras-roscadoras (8)
- Taladro de núcleo (1)
- Talarados de alto rendimiento (4)
- Terraja automática (1)
- Tornillos portapieza (193)
- más
- AB MARVIN (1)
- ABA (2)
- ABARBOGA MASKINER (1)
- ABB (1)
- ABCD MACHINERY (1)
- ABM (8)
- ACCUWAY (2)
- Aciera (24)
- ACME (1)
- ADRIASTROJ (1)
- AEG (6)
- AGFA (1)
- AGIE - CHARMILLES (1)
- AGIE - CHARMILLES 3R (1)
- AGIE CHARMILLES (3)
- AKIRA SEIKI (2)
- AKIRA-SEIKI (1)
- ALBERTI (1)
- ALBRECHT (1)
- ALESA MONTI (1)
- ALESAMONTI (1)
- ALFRA (1)
- ALIA TOOL (1)
- ALKETT (1)
- ALLMATIC (35)
- Alzmetall (122)
- AMADA (1)
- ANAYAK (1)
- ANGER (1)
- ANJO (3)
- APEC (1)
- APOLLO (1)
- APRA NET (1)
- ARBOGA (7)
- ARBOGA MASKINER (1)
- ARCHDAHLE (1)
- ARES_SEIKI (1)
- Arion (2)
- ARLO (1)
- ARNOLD (4)
- ARSENAL (1)
- ASDORF (1)
- ATLAS COPCO (1)
- ATOLL (1)
- ATORN (2)
- AUDAX (1)
- Auerbach (5)
- Avia (4)
- AVIA FOP (1)
- Awea (8)
- AXA (19)
- Axile (2)
- AXON (2)
- AXON LITZ (1)
- AYCE (2)
- AYEL-TECH (2)
- BARON MAX (1)
- BATLIBOI (1)
- Battenfeld (2)
- BECKHOFF (1)
- BEMATO (1)
- BERARDI (1)
- BERG (IBAG) (1)
- BERGER (1)
- BERGMAN-BORR (1)
- BERGMANN (1)
- Bergonzi (4)
- Bernardo (19)
- Bernhard Steinel (2)
- Bernstain (2)
- BEYER (2)
- BGU (1)
- Bierrebi (3)
- Bierrebi LEA SRL. (9)
- BIGLIA (1)
- Bimak (5)
- BIZERBA (1)
- BJM BECKHOFF (1)
- BJM Miksch (2)
- BLANSKO (1)
- BLUETECH (1)
- BLUETOOTH CNC (1)
- BLUTHARDT (7)
- BLUTHARDT/PARABO (1)
- BMW (2)
- BOEHRINGER (1)
- BOLEY (1)
- BOLLHOFF (1)
- BORING MACHINE UNION (1)
- BOSCH (1)
- BOSS (1)
- BREDA (5)
- BREVETTI MOTTA (1)
- BRIDGEPORT (24)
- BRIDGEPORT 1 (1)
- BRIDGEPORT 2 (1)
- BROTHER (18)
- BUCK (1)
- BUFFALO MACHINERY (1)
- BUMOTEC (1)
- ... más
Fabricante:
(Categoría: 101)
Año de construcción: 1954
usado
Rotational speed: 90-710/min, connected load: 12kW, can be inspected. ... más información
Año de construcción: 1989
usado
X-travel: 2x 500/ 1600mm, y-travel: 300mm, z-travel: 250mm, controls: Heidenhain TNC 355, with documentation, accessories available, was maintained regularly, an inspection is possible. ... más información
Año de construcción: 2005
usado
X-axis: 2000mm, y-axis: 750mm, z-axis: 800mm, max. workpiece weight: 2.5t, spindle hours: 12000h, connected load: 60kVA, length: 4000mm, width: 3100mm, height: 3200mm, weight: 22t, with documentation and tools, has been regularly serviced, on-site inspection is possible, the machine will be available from July 2024.
usado
Connected load: 5kW, weight: 3t. ... más información
usado
Stroke: 780mm, rotational speed: 30-1700/min. ... más información
Año de construcción: 1951
usado
Drilling capacity steel/ cast iron: 35/45mm, length: 1100mm, width: 600mm, height: 2050mm. ... más información
usado
Rotational speed: 37-1900/min, an inspection is possible. ... más información
Año de construcción: 2009
usado
X-axis: 1100mm, y-axis: 610mm, z-axis: 610mm, max. milling spindle speed: 6000/min, control: Siemens 840D SolutionLine, operating hours: 40,964h, with tool holders, hydraulic vices, electromagnetic device, further accessories and documentation, without tools and tool cabinet, a roll end milling cutter is also available, on-site inspection is possible.
Año de construcción: 1998
usado
X-axis: 2000mm, y-axis: 400mm, z-axis: 560mm, connected load: 23kVA, weight: 4.7t, fourth axis axis with tailstock, ran in two-shift operation, on-site inspection is possible. ... más información
Año de construcción: 1996
usado
X-travel: 630mm, y-travel: 630mm, z-travel: 630mm, B-travel: NC + 2 pallet changers, controls: Heller uni-Pro CNC 90, the machine needs to be overhauled, a power module is defective, therefore Z-axis does not move, reference point approach not possible, with documentation. ... más información
usado
Number of tool slots: 30, connected load: 18kVA, controls: Fanuc O-M, with chip conveyor, was maintained regularly. ... más información
Año de construcción: 1993
usado
X-travel: 17,000mm, y-travel: 4500mm, z-travel: 1400mm, W-travel: 1000mm, table dimensions: 3300x4400mm, max. workpiece weight: 95t, spindle diameter: 180mm, control: Siemens Sinumerik 880, with documentation, three additional angular milling heads are available, on-site inspection is possible. ... más información
Año de construcción: 2020
usado
X-travel: 600mm, y-travel: 600mm, z-travel: 500mm, max. rotational speed: 1-17,500/min, max. load: 600kg, number of tool slots: 2x 42, max. tool weight: 350kg, controls: Siemens 840D SL, connected load: 133kVA, length: 4800mm, width: 3370mm, height: 7500mm, weight: 20t with 3D probe and documentation, without operational hours counter, was maintained regularly, an inspection is possible.
Año de construcción: 2015
usado
X-travel: 600mm, y-travel: 600mm, z-travel: 500mm, max. rotational speed: 1-17,500/min, max. load: 600kg, number of tool slots: 2x 42, max. tool weight: 350kg, controls: Siemens 840D SL, connected load: 133kVA, length: 4800mm, width: 3370mm, height: 7500mm, weight: 20t with 3D probe and documentation, without operational hours counter, was maintained regularly, an inspection is possible.
Año de construcción: 2015
usado
X-travel: 600mm, y-travel: 600mm, z-travel: 500mm, max. rotational speed: 1-17,500/min, max. load: 600kg, number of tool slots: 2x 42, max. tool weight: 350kg, controls: Siemens 840D SL, connected load: 133kVA, length: 4800mm, width: 3370mm, height: 7500mm, weight: 20t with 3D probe and documentation, without operational hours counter, was maintained regularly, an inspection is possible.
Año de construcción: 2014
usado
X-travel: 600mm, y-travel: 600mm, z-travel: 500mm, max. rotational speed: 1-17,500/min, max. load: 600kg, number of tool slots: 2x 42, max. tool weight: 350kg, controls: Siemens 840D SL, connected load: 133kVA, length: 4800mm, width: 3370mm, height: 7500mm, weight: 20t with 3D probe and documentation, without operational hours counter, was maintained regularly, an inspection is possible.
Año de construcción: 2014
usado
X-travel: 600mm, y-travel: 600mm, z-travel: 500mm, max. rotational speed: 1-17,500/min, max. load: 600kg, number of tool slots: 2x 42, max. tool weight: 350kg, controls: Siemens 840D SL, connected load: 133kVA, length: 4800mm, width: 3370mm, height: 7500mm, weight: 20t with 3D probe and documentation, without operational hours counter, was maintained regularly, an inspection is possible.
Año de construcción: 2007
usado
X-travel: 1300mm, y-travel: 710mm, z-travel: 710mm, table height: 710mm, table dimensions: 1500x660mm, table height: 880mm, max. workpiece weight: 1.2t, length: 3400mmm, width: 3240mm, height: 3000mm, weight: 5.5t, with tools, has been regularly serviced, on-site inspection is possible. ... más información
usado
Control: Heidenhain TNC 430M, connected load: 30kVA, operating hours: 27,879h, the machine is heavily used, X- and Y-axis need to be overhauled, the motor of the Z-axis is defective, an on-site inspection is possible. ... más información
Año de construcción: 2007
usado
Number of axes: 6, x-travel: 240mm, y-travel: 350mm, z-travel: 350mm, U-travel: 9500mm, A-travel: 360°, max. bar length: 7500mm, max. workpiece weight: 500kg, work spindle power: 4.55kW, suitable for drilling, milling, thread cutting, aluminum cutting, has been regularly serviced, with documentation and roller conveyors, on-site inspection is possible.