máquinas rectificadoras usadas para la venta

centre height: 165 mmcentre distance: 450 mmweight: 165 kgdimensions of the machine ca.: 0,4 x 0,4 x 1,4 m3 Geschwindigkeiten, Rechts-/ und Linkslauf.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

Description: Operating voltage: 380 V Control voltage: 220 V Rated current: 8 A Magnet dimensions: 500 x 200 mm Table dimensions: 620 x 250 mm With 3 grooves Grinding wheel diameter: approx. 150 mm Incl. 2-axis digital readout from the manufacturer HEIDENHAINweight approx.: 700 kg, Approx. Onsite Dimension. (l x w x h): 2,100 x 950 x 1,600 mm

Description: Voltage 230 volts, 3000 rpm, without additional accessoriesApprox. Onsite Dimension. (l x w x h): 600 x 600 x 1,200 mm, weight approx.: 60 kg ... más información

Description: Incl. Cupboardweight approx.: 50 kg, Approx. Onsite Dimension. (l x w x h): 800 x 400 x 1,400 mm ... más información

Description: Swivelling magnet Magnet clamping surface: 1500 x 150 mm + 1000 x 150 mm Grinding motor: 7kW Accessories: ,50 slip rings Additional and , suitable slip rings can be purchased separately: (approx. 100 pieces Ø 150 x 120 mm BHG Ø 76.2 mm)Approx. Onsite Dimension. (l x w x h): 4,500 x 1,000 x 1,800 mm, weight approx.: 4,000 kg

Description: The following repairs have been carried out in recent years: Tubular heating element replaced (2002) Rubber screen (2005) Magnetic dosing pump (2007) Spur gear motor (2016) The rubber coating is in good condition (see photos) Speed range: 800 - 1500 rpm Drum: Inner diameter: approx. 1280 mm Outer diameter: approx. 1360 mm Depth: approx. 600 mm Total drive power: 7.5 kW Connected load: 380 V Installation plan: see photos Approx. Onsite Dimension. (l x w x h): 2,200 x 1,900 x 1,700 mm, weight approx.: 1,500 kg

Description: Machine number: 1999 Grinding wheel diameter: approx. 100 mmApprox. Onsite Dimension. (l x w x h): 500 x 400 x 400 mm, weight approx.: 70 kg ... más información

Description: Band width: approx. 50 mmApprox. Onsite Dimension. (l x w x h): 700 x 500 x 1,600 mm, weight approx.: 50 kg ... más información

Description: Belt width: 75 mm With suction unit from the manufacturer STRAHLBOSS Machine number: 4929 Material support length: approx. 900 mm (rolling elements) Installed belt grinding width: approx. 80 mm For belt lengths: 4000 mmweight approx.: 350 kg, Approx. Onsite Dimension. (l x w x h): 2,500 x 2,100 x 2,200 mm

surface area: 1.000 x 600 mmtable load: 1.500 kgtravel -x axis: 1.200 mmtravel -y axis: 652 mmtravel -z axis: 497 mmMotor Capacity: 7,5 kWFlat Grinding Machine | OKAMOTO - ACC 106 CA-IQ equipped withmagnetic plateThe machine is in a well-maintained condition andcan be inspected at any time under power.Please note that the technical detailswere added from comparable machines.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: ACC106 | ACC 106 CA IQ | ACC-106 CA-IQ | ACC106CAThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Serial number: 10034 Magnetic chucks dimensions: approx. 630 x 200 mm Max. Sanding diameter: approx. 250 mm Year of manufacture: 1989weight approx.: 2,500 kg, Approx. Onsite Dimension. (l x w x h): 2,800 x 1,800 x 1,900 mm ... más información

The machine is in good technical condition. Circular diameter: 300mm Distance between tines: 600mm Fanuc control system Including documentation. 600 x 600 x 600 mm. ... más información

Description: .Approx. Onsite Dimension. (l x w x h): 800 x 600 x 1,300 mm, weight approx.: 80 kg ... más información

Description: serial number 182227  , working area : grinding diameter without steady rest 8-200 mm grinding length 500 mm center height 135 mm travel of worktable max. 640 mm grinding diameter with steady rest 8-60 mm inside grinding diameter without rest 25-100 mm inside grinding ,diameter with steady rest , 35-100 mm inside grinding depth 125 mm max.workpiece weight between centers 50 kg  , feeds: , table feed, infinitely variable - longitudinal axis 0,1-4 m/min traverse per. rev. of headwheel  ,1 mm traverse per. div. of headwheel  ,0.005 mm  , headstock: , work spindle speeds 25 - 380 1/min working headstock swivel range ° 0 - 45° spindle taper MT4 inside grinding spindle speed  ,16000 min/1 grinding headstock swivel range ± 30° grinding head travel  ,200 mm grinding wheel peripheral speed 35 m/s grinding wheel speed   ...

Description: NAGEL VL15-700 PT Vertical Long Stroke Honing Machine with a stroke length of 7 metres and shuttle table. Control Honspindelsteuerung NAGEL MS-U3 Honspindel Anzahl der Spindeln: 1 hydr. Hublänge: 50 - 7000 mm Hubgeschwindigkeit (stufenlos) max.: 25 m/min Werkzeuganschluss: 65 mm Spindeldrehzahl (stufenlos): 30 - 280 U/min Hubantriebsleistung: 22 kW Spindelantriebsleistung 15 kW Messgerät Zeitautomatik (elektromechanische/elektrohydraulische Stufenerweiterung)  ,Gesamtdaten Hydrauliktank: 1250 l Gesamtanschlussleistung: 68 kW Bitte schauen Sie sich unser Maschinenvideo und die Dokumentation im PDF an. Werkzeuge sind nicht Bestandteil des Artikels.stroke: 50-7000 mm, control: NAGEL MS-U3, turning speed range: 30-280 rpm, feed range: 0-25000 mm/min, total power requirement: 68 kW, weight approx.: 25,000 kg, Approx. Onsite Dimension. (l x w x h): 7,500 x 7,500 x 1 ...

Description: Data according to technical data sheet: Power of the standard machine: Largest sanding length 600 mm, Largest sanding width 350 mm, Largest sanding height 350 mm Table: ,Length of the clamping grooves 1000 mm, dimensions of the clamping surface 600 x 300 mm, dimensions and center-to-center distance of the 3 T-slots 14 x 100 mm, ,max. longitudinal stroke 680 mm, , Grinding wheel:  ,Standard dimensions (diameter x bore) 356 x 127 mm, standard width 50 mm, max. transverse stroke 300 mm, , Without CE certificateweight approx.: 3,000 kg, Approx. Onsite Dimension. (l x w x h): 2,800 x 1,400 x 2,100 mm

Description: Without CE certificateweight approx.: 7,500 kg, Approx. Onsite Dimension. (l x w x h): 4,200 x 2,500 x 2,800 mm ... más información

Description: SPECIFICATIONS Character: Wiedemann Cylinder fine drill Year of construction: 1968 Stroke: 500 mm Table dimensions: 520 x 1,400 mmweight approx.: 3,000 kg, Approx. Onsite Dimension. (l x w x h): 1,700 x 1,800 x 2,400 mm ... más información

Description: SPECIFICATIONS Brand: Glauchau Type: SI 6/3 Year of construction: 1997 CNC milled Maximum slip depth: 250 mm Grinding depth: ø650 mm Speed: 50 - 500 rpm Internal slice installation X (center internal slide): 155 mm Length displacement internal grinding device on table: 540 mm Tool grinding device Z (panel placement): 700 mm Overall diameter: ø650 mm Grinding diameter for inside grinding: ø10 - 500 mmweight approx.: 7,500 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 2,300 x 2,200 mm

Description: SPECIFICATIONS Character: Loroch Type: K/CNC Slip motor: 1 hp/kW Machine dimensions (lxwxh): 1,500 x 800 x 1,900 mm Saw blade grinder Max saw blade diameter: 910 mm Grinding disc diameter: 200 mm No parameters availableApprox. Onsite Dimension. (l x w x h): 1,500 x 800 x 1,900 mm, weight approx.: 950 kg