subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 112)
max. wheel diameter:5 - 260 mmgear width:400 mmmax. module:15 min. module:0,5 gear hobbing diameter - internal:30 mmmax. helix angle:> 85 ° Aussenverz.max. helix angle:> 45° Innenverz.Testing Range vertical:400 mmdist. between centers:5 - 600 mmtable diameter:260 mmmax. table load:100 kgspeeds:30 1/mintotal power requirement:1,6 kVAweight of the machine ca.:900 kgdimensions of the machine ca.:200 x 1300 x 2150 mmCNC Gear Tester in good condition, out of OEM Test Lab.For measuring of spur and helical toothing, additional of rotationally symetric parts as true running, coaxiality, axial runout, etc. with tool changer ( 4 nos.)
max. wheel diameter:300 mmgear width:100 mmmax. module:5 workpiece turning speeds:0 - 1000 1/minwork piece - max.:1100 mmworkpiece clamping:auto. tension device number of spindle speeds:1000 1/min.spindle bearing diameter:100 mmdiameter of spindle flange:120 mmtailstock travel:80 mmweight of the machine ca.:3500 KGdimensions:1200 x 1450 x 2250 mmtotal power requirement:10 kVAThe Gear Tooth Deburring machine WERA, ZEM 300 for deburring of splines gear wheels and shafts, with Pointing Facility.
max. wheel diameter:130 mmmax. module:3 total power requirement:15 kWweight of the machine ca.:6 tdimensions of the machine ca.:2,3 x 2,5 x 2,17 mA well-preserved CNC hobbing machine Vertical for shafts and wheelsWith tailstockAlso suitable for hard milling (good for steering pinion)Rapid traverse radial, axial: 10.000 mm/min Rapid traverse tangential: 7.500 mm/min Max. wheel diameter 130 mm Max. module 3 mm Tangential slide travel 200 mm Radial slide travel 10 / 100 mm Axial slide travel 300 / 200 mm Milling head speed 250-3500 U/min Milling head -swivable +/- 40 ° Tool diameter 80 mm Tool length - max. 240 mm Table turning speeds 5 - 1000 U/min Milling spindle drive 15 kW Feed range 0,1 - 2000 mm/min Table diameter 132 mm Control Sinumerik 840 C Connected load 40 kVA Motor output 15 kW Weight : 6 T Dimensions 2300 mm 2500 mm 2170mmAccessories :Hydraulical workpiece clampingAutomatic ...
max. wheel diameter:180 mmmax. module:5 min. module:1 weight of the machine ca.:14 tdimensions of the machine ca.:4,5 x 2,84 x 2,8 mmin. number of teeth:7 toolpiece turning speed range:4000-10000 U/mintool length:210 mmWith tail stockNo dressing deviceOnly CBN ... más información
max. wheel diameter:180 mmgear width: mmmax. module:4 total power requirement:14 kWweight of the machine ca.:8 tslide travel axial ( Z-axis ):300 mmwork piece - max.:490-640 mm ... más información
max. wheel diameter:275 mmgear width:58 mmmax. module:8 min. module:0,5 weight of the machine ca.:10 tmax. number of teeth:200 min. number of teeth:5 ... más información
pulling force - max.:2,5 tmax. ram stroke:1000 mmmax. workpiece diameter:40 mmBroaching speed:60 m/min.return speed:20 m/min.total power requirement:24 kWweight of the machine ca.:6 tdimensions of the machine ca.:1,7 x 2,4 x 4,77 mclamping plate:320 mm ... más información
max. wheel diameter:40-160 mmgear width:90 mmmax. module:3,5 min. module:1,25 weight of the machine ca.:5,6 tFor detailed technical data, see PDF File Page 15-16 ... más información
Description: The Gleason-PFAUTER CNC Gear Shaping Machine P 1200 S offers an extensive working range and impressive technical data. With a nominal workpiece diameter of 1,200 mm for external and internal gears and a maximum workpiece diameter of 1,400 mm without a counterholder, it is extremely versatile. Control and Machine Number Control: SIEMENS Sinumerik 840D Machine number: 30 114 Working area Table diameter: 1200 mm Table bore: Ø 300 Workpiece specifications Max. orbital diameter: 1400 mm Nominal workpiece diameter (external and internal toothing): 1200 mm Nominal module max.: 16 mm Toothing width max.: 350 mm Shaping head specifications Max. stroke rate of shaping head: 80 min-1 Please take a look at the technical data and layout plans in the PDF file.max. wheel diameter: max. 1400 mm, module min./max.: max. 16, gear width: 350 mm, control: SIEMENS Sinumerik 840 D, tab ...
Description: The system consists of: Face Plate , (diameter 2000 mm) Manipulator , AUBO ROBOTS, type Auboi5, equipped with camera weight approx.: 2,500 kg, Approx. Onsite Dimension. (l x w x h): 2,300 x 2,300 x 2,000 mm ... más información
Description: 6 baths weight approx.: 1,200 kg, Approx. Onsite Dimension. (l x w x h): 10,500 x 3,000 x 3,400 mm ... más información
Description: The system consists of: Mitsibishi robot, type RV-6SL-S12 (currently defective) , year of construction 2008 , payload 6 kg incl. control and control unit rotary table and the Rollscan 300 from Stresstech , set up as shown in the layout weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 3,450 x 2,359 x 2,200 mm
Hydraulic tailstock, Ø max. gear: 250 with 3 cutter, Module: 5,5, Hobbing length: 70, Cutter module: 5,5, Outside ø max. acknowledged: 300 mm, Ø spindle: 85 mm, Ø hole table: 39 mm, Ø table: External centering Ø139,75, Power tool motor (b): 4 Cv, High: 1.800 mm, Long: 1.450 mm, Weight: 2.450 Kg, Width: 1.000 mm
Divider, counterpoint, dividing discs, useful sharpening bits, useful sharpening blades, cones and grips., Specification: Universal ... más información
Shaft holders, dividers, Wheels / axis milling, dividers, wheels, High: 1765 mm, Long: 2570 mm, Width: 1100 mm, Weight: 2500 Kg, Ø tool: 250 mm, Total power: 7.5 kva., Travel of table: 400 mm, Height of centers: 125 mm, Power wheel motor: 3 Kv., Ø max to sharpen: 250 mm, Distance between points: 635 mm, Revolutions of the wheel: 1750/2150/2850 mm, Maximum length to sharpen: 400 mm, Radial travel axis wheelhead: +35 / -65 mm, Vertical travel of the wheel: 175 mm, Cone holder shaft clamping pieces: ISO 40, Speed continuous longitudinal table: From 30 to 1000 mm / min., Specification: Strawberry mother
Cooling equipment - weight: 200kg L 1,700 x W 800 x H 900 cm, High: 2.100 mm, Long: 2.400 mm, Width: 2.400 mm, Weight: 2,500 Kg., Voltage: 380 V, Total power: 4 Kw, Wheel speed: 2,250 / 6,000 rpm, Grinding length: 400 mm, Ø max workpiece: 320 mm, Transversal stroke: 260, Longitudinal stroke: 400 mm, Distance between points: 700 mm, Race car rolling (x axis): 400 mm, Vertical travel of trolley wheel: 280 mm, Specification: Universal
Divider, Wheels, Chucks, Divider Discs, Points, High: 1.500 mm, Long: 1.100 mm, Width: 1.400 mm, Weight: 600 kg, Voltage: 220/380 V, Ø tool: 200 mm, Total power: 1.5 HP, Wheel speed: 3,000 / 6,000 r.p.m., Grinding length: 450 mm, Ø max workpiece: 300 mm, Transversal stroke: 300 mm, Longitudinal stroke: 450 mm, Distance between points: 450 mm, Tilting the tool trolley: +/- 20º, Race car rolling (x axis): 450 mm, Vertical travel of trolley wheel: 250 mm, Specification: Universal
Divider, Wheels, Chucks, Divider Discs, Points, High: 1.500 mm, Long: 1.400 mm, Width: 1.170 mm, Weight: 600 kg, Voltage: 220/380 V, Ø tool: 200 mm, Total power: 1.5 HP, Wheel speed: 3,000 / 6,000 r.p.m., Grinding length: 450 mm, Ø max workpiece: 300 mm, Transversal stroke: 300 mm, Longitudinal stroke: 450 mm, Distance between points: 450 mm, Tilting the tool trolley: +/- 20º, Race car rolling (x axis): 450 mm, Vertical travel of trolley wheel: 250 mm, Specification: Universal