Fabricante:
(Categoría: 202)
AUTOMATIC CUTTING , BORING and MOULDING machine type PADE 1000 N Machine suitable for assembling part of chairs, tables, frames, small furniture, wheelchair frames, etc. The PADE 1000 N performs the operations of Cutting , milling and drilling at the end of the piece, either singularly or differently combined. All movements of the machine are controlled by pneumatic devices. composed by 3 working units : 1- Cutting unit circular saw diam. mm.350 motor power hp 3 2- Boring unit boring head with 5 / 7 mandrins motor power Hp 3 max. working stroke of boring unit mm. 130 3- Moulding unit vertical spindle for moulder motor power Hp 5,5 spindle diam. mm.30 pneumatic sliding carriage volt. 380/50
Manufacturer: Homag , Type: Power FR 20/09/15/L/Q1, Year: 2007, Control: Powercontrol Homag, Conveyor: Nockenkette, Work piece width min-max mm: 350, Min.-max. workpiece length in mm: 220-1500, Min.-max. workpiece height in mm: 10-30, Machine with controlled dogs: yes, Cam distance mm: ca.500, Feeding speed min-max m/min: ca.60, Feed stepless: yes, verängerte Kette mm: yes, Overall milling units: 5, Moulding units swivel-mounted: 5, gesteuerte Fräsaggregate: keine, 1st milling unit kW / rpm: 6,6/5850, 1. swivelling controllable: yes, 2nd milling unit kW / rpm: 6,6/5850, 2. swivelling controllable: yes, 3rd milling unit kW / rpm: 6,6/5850, 3. swivelling controllable: yes, 4th milling unit kW / rpm: 6,6/5850, 4. swivelling controllable: yes, 5th milling unit kW / rpm: 6,6/5850, 5. swivelling controllable: yes, Year :2007
I sell a double end cutting and milling machine FRIULMAC IDRAMAT, built in 2007. Working width up to 2500mm Configuration left side / fix: 1 + 1 pcs. cutting units top + bottom / 3.0 + 3.0 KW 1 + 1 pcs. groove saw units front + rear with jump Configuration right side / movable: 1 + 1 pcs. cutting units top + bottom / 3.0 + 3.0 KW 1 pcs. special milling unit on top / 5.5 KW Material pressure band with support from above. Special design, also suitable for side dimensioning. Continuous machine. Siemens Simantic control panel. Condition Very good. Available the same.
Wedge tine plant Scharpf and Kögel - milling machine with threshing table wide 800 mm - manual handover - press 6000 mm ... más información
Type PENTHO 2 Moulding unit 545x50 mm Max. moulding tool 350 mm engine power 7,5 kW 400V Table dimensions 500х1030 mm Automatic feed 4/16 m/min. Made in Belgium 2007 m./y./g. Transport dimensions 2700x2200x2100mm Weight 1500 kg ... más información
Max tenon width: 100 mm + thicknessMax tenon thickness: 30 mmMax tenon depth: 50 mmTable adjustments: vertical: 100 mmtilt on both sides: 15?/0?/-15?front tilting: +5?/-20?guide on table for mitre positioningcutter spindle motor: 3,7 kWmotor for drum rotation: 0,4 kWdust extraction: 2 x 100 mm ... más información
SECOND-HAND TWO BENCHES OSCILLATING MORTISER PADE MOD. MO - CE RULES - kw 3 - volt 400/50 - year 2007 ... más información
description TECHNICAL DETAILS Support table: 3250 x 1250 mm X-travel: 3860 mm Y-travel: 1822 mm Z1/Z2 travel: 325 / 185 mm Workpiece thickness: max. 125 mm X / Y / Z speed: 100 / 50 / 20 m/min X-travel distance suction nozzle: 4210 mm Tool holder: HSK F63 Number of tools: 14 (disc) Vertical drilling spindle: 19 pieces Horizontal drilling spindle: 6 pieces Milling unit: 2 x HSK F63 collet chuck Drill holder: 10 mm Drill spindle holder: 20 - 35 mm MACHINE DETAILS Loading dimensions: 5800 x 2300 x 2300 mm Installation dimensions: 5830 x 4100 x 2300 Weight: 4.3 tonnes Surface pressure: 1.20 N/sqmm Concrete thickness: min. 200 mm Operating voltage: 3 x 400 V Voltage: 50/60 Hz Rated current: approx. 32 A Total connected load: 17.5 kW Pneumatics: according to ISO 8573-1 Connection: R 1/2 Pressure: 7 bar Consumption: 100 - 200 NL/min Matching s ...
Machining center Biesse Rover B 4.50 The machine is in very good condition and is regularly serviced. Biesse Works software Remote control for manual control Automatic tool change system with 12 positions - located on the working head Working area in the X axis 4600 mm The working area in the Y axis is 1342 mm
Italmac Spring 3 axis machining center. Machinery for window processing Axis X 3000 Axis Y 220 Z axis 200 Tool change 4 CNC numerical control Machinery will be provided with all documentation, use and maintenance and declarations of conformity. ... más información
⢠m500 model ⢠serial number: 2655/0h ⢠year of manufacture: 2007. ⢠machine dimensions: 6650 x 3050 x 2750 mm ⢠machine power: 20 kw ⢠weight: 6000 kg ⢠It has 2 Machwiss 8.5 kW milling motors with automatic tool change, 1 cutting disc, and a group of side drills. ⢠working speed of the motors: 1200-18000 rpm ⢠It has an automatic tool change of 6 tools. ⢠the work area is two tables of 2460 x 1300 mm. ⢠Machine operational and with up-to-date maintenance. ⢠The price includes perimeter fencing, security barriers, security control buttons and a 3 kW vacuum pump with a flow rate of 160 m3/h. ⢠The price of the machine includes the disassembly of the different elements and loading onto a truck. Transportation and unloading and start-up of the machine are not included in the price and will be the responsibility of ...
x-travel: 650 mmy-travel: 540 mmz-travel: 620 mmControl: Heidenhain type: iTNC 530 table surface area: 800x540 mmTool changer: 20 Posspindle taper ISO: 40 turning speeds: 50-10.000 U/minCooling through the spindle: 20 barworkpiece weight: 600 kgtotal power requirement: 14 kWweight of the machine ca.: 4,2 tdimensions of the machine ca.: 2,4x2,1x2,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
workpiece length: 1,3x1,3x0,9 mworkpiece height max.: 900 mmworkpiece width - max.: 1300 mmweight of the machine ca.: 5 tdimensions of the machine ca.: 2,9x2,29x3,3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información
Spindle moulder with fixed spindle, table with extensionsTable length: 1750 x 500 mmSupport rail in the frontsiko reading for setting input and output supportLateral tenoning carriageSpindle diameter: 50 mmHeight motorised with digital readoutMotor 5,5 kWSpindle speed,3000, 4500, 6000, 8000, 10500 ... más información
Rover Machining center biesse rover c6.50 very good condition about 6000 h, one 4 axis spindle, 1 3 axis spindle, drilling block biesse works software Machine visible in operation ... más información
Hofmann TFS 107 table milling machine for profiling and milling wood with electric height and swivel adjustment as well Sliding carriage roll table., table size: 1,200 x 815mm, Direction of rotation: Left Right, Spindle ø: 30 mm, clamping length: 140 mm, number of revolutions: 3,000 / 4,500 / 6,000 / 9,000 rpm
BIESSE ROVER A 3.40 machining centre Working Range X: 3060mm Working range Y: 1260 mm Working range Z: 150 mm Number of electrospindles: 1 Main motor 12 kW Tool magazine slots: 18 Vertical drilling spindles: 14 Machine Table: Traverse Table Software: BIESSE BIESSEWORKS ADVANCED + additionally on board Machine control: BIESSE XP 600 - Manual control panel: Yes Fabric stands: yes ( new suction cup rubbers ) - BIESSE ATS: Yes Fixed mounting points for chiller: yes Material clamping system: HSK-F63 Horizontal drilling spindles in the X-axis: 4 Horizontal drilling spindles in the Y axis: 2 Sawing unit: in X direction - Boom Design: Yes Number of traverses: 6 Vacuum pump: Yes Vacuum pump capacity m³/h: 90 - CAD (.dxf) reading interface: yes
Manufacturer Ganner Maschineprotuktion, Austria automatic drilling of holes in panel parts of furniture, including drilling of sockets for installation of accessories, as well as automatic mounting of accessories. Distinctive features: Rigid stable design - a work table with PVC rollers, eliminating damage to workpieces when moving; - rack-and-pinion drive drive for feeding a drilling support, feed speed up to 75 m / min; -controlled axis Y of the drilling support allows you to process workpieces with a width of 130 mm to 700 mm; -controlled Z-axis of the drilling support allows drilling to a depth of 35 mm (drill length 70 mm), with the possibility of through-hole drilling; -controlled X axis of the longitudinal support with rack and pinion drive and linear guides, speed up to 120 m / min for moving and positioning workpieces with lengths from 250 mm to 2300 mm; -controlled Y a ...
Used CNC-processing centre Brand: HOMAG Type: OPTIMAT BAZ222/60/K Not rebuilt-without warranty Year: 2010 with gluing unit with FLEX-5unit Workpiece length max: - All units: singe field 6.000mm, pendular process 2.375mm, - At tool-Ø 25mm: 6.175mm, pendular 2550mm Workpiece width max. frontal: - All units 1150mm, - At milling process with tool-diam. 25 mm: 1220mm, - At edge banding: 1220mm at workpiece thickness max. 40 mm rear: - All units 1400mm, - At milling process with tool-Ø 25 mm: 1550mm, - At egde banding 1475mm - with standard flush milling and gluing 1500mm Workpiece thickness: - Max. 300 mm inclusive chuck at use as top miller - Up to max. 60 mm with standard clamping without limits for units and suction - Min. 12 mm at chamfer milling - Min. 16 mm at radius millers or min. 2 x Radius + 10 mm Main spindle 15 KW, HSK F63 C-Axi ...
Manufacturer: Friulmac , Type: Quadromat S, Year: 2010, Machine no 1: yes, Motore Maschine 1: 3, Machine 2: yes, Motore Maschine 2: 3, Conveyor: yes, Work piece width min-max mm: 207-800, Min.-max. workpiece length in mm: 250-2010, Min.-max. workpiece height in mm: 7-22, Feeding speed min-max m/min: 10-90, Feed stepless: yes, Overall milling units: 3+3, Year :2010