planing machines used for sale

WEINIG high performance planer Type Hydromat 22 BL (full checked!) Built in 1995 With safety hood and soundproofing cabin! Machine specifications: - Planing capacity 220 x 120 mm - Feeding, 8- 80 m/min, motor 18.5 kW Spindle layout: Bottom-right-Links Top - bottom, table rigid Bottom, table rigid, spindle prepared Top - bottom, table rigid, spindle prepared gap unit, consisting of 1 right and 1 left spindle 30 kW each (4500 rpm) incl. table roll, sliding roller, spray indentation and wedge dissipation 4 Roller pull-out Special printing and fittings for the production of top layer slats Feed (divider) for slats and pull-out tape

Koelle Edge Planer Model FKF 51 Built in 1993 max material thickness 45 mm, Machine size L 304 x W 65 x H 87 cm, Joining head with carbide reversible knife mobile Weight approx. 360 kg The machine is in good condition, ready for use. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Koelle edge planing machine model FKF 51 is in good condition, ready to use. L x W x H = 3000 mm x 700 mm x 950 mm Weight approx. 200 kg Built in 1982 Engine No. 390 The rubber rings at the pressure rollers should be times replaced. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Weinig Profimat 23 Fortec + EM11 four-sided planer Working width 230mm Working height 140mm Number of spindles 6 Spindle arrangement Bottom 7.5kw Rights Left 11kw Top 7.5kw Top 5.5kw Bottom 5.5kw Pneumatic clamps Feed speed adjustable on the variator Drive on cardan shafts CE Certified EM11 Hydraulic Component Feeder Possibility to purchase the machine without a feeder

Inv. Num. : 7406 Type: RISZ 16 Producer: ARTHUR KLINK Created: 1993 Parameters: Theoretical diameter of the tool: 95 mm Max. workpiece height: 300 mm Clamping surface: 400x400 mm Maximum working stroke: 1250 mm Maximum stretching force: 16 t Weight: 6900 kg  ... more information

Inv. Num. : 6696 Type: Profiset 60 Producer: SCM Created: 2018 Parameters: Number of spindles: 5 Vacuum belt width: 25-230 mm Working height: 6-120 mm Max. speed: 6000 1/min Equipment: Swivel head  ... more information

Used four-sided planer Int. Art. Ref. m3491 Manufacturer: SCM Type P 64 B Built in 1988 4 planer shafts YOC 1988 max. planing width 165 mm min. planing width 23 mm max. planing height 105 mm min. planing height 6 mm Spindle speed 6,000 rpm. Weight approx. 950 kg Location: 59425 Unna The machine can be viewed under electricity. We will be happy to send you more photos by e-mail. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfe ...

MARTIN T90 Year of construction 1996 Nominal current: 64 A max. planing width: 260 mm max. planing height: 160 mm 5 spindles: 4x Tersa planer head + 1x universal spindle Spindle arrangement: Bottom – Right – Left – Top – Universal Spindle 1 – 4: 4 knife shaft – Tersa Use of profile knives for chamfers and radii possible (spindle R + L + O) Spindle 5: Universal 40 mm spindle (max. tool diameter: 220 mm) swivel (- 45° / + 90°) Bottom: 5.5 kW Left+Right: 5.5 kW Top: 5.5 kW Universal: 7.5 kW Feed speed: 4 – 25 m/min. (infinitely variable) electronic positioning control (storage of up to 100 pairs of dimensions possible) Engine brake Central lubrication Extras: Universal spindle Table extension at the spout Hold-down device for joining shaft right incl. 8 new rubber pull-out rollers Suction connection: 250 + 160 mm Dimensions: L: 524.5 cm W: ...

Gebr. Planer REX A510 YOC 1981 Motor power: 4 kW Planing width: 51 cm Table length: 245 cm 2-Knife Shaft Strip Plane Knife Working height: 100 mm Additional overarching fence (standard dressing fence) incl. 2 rollers Feeder Wood Type ETK 0.3 / 0.5 HP Aigner Relief Stop Weight: approx. 950 kg Sold in ACTUAL condition and unrefurbished from carpentry dissolution. Fixed price.

SCM 2250 Dressing thickness planer Motor 5.5kW Planing width 500mm 4-planer blade shaft Dressing table length 2200mm Built in 1981 Thickness height 225mm 1 under-table roller G&2978-M3ZNB  ... more information

Four-side planer / profile milling machine Fabr. Gubisc Model: 172/1K+R Year of construction: 1981 Planer width: 170mm 5 spindles  ... more information

Four-sided planing and roll forming machine SCM COMPACT P max. working width ( finished dimension ) 230 mm max. working height ( finished size ) 120 mm Motor power dressing spindle 4 kW Motor power vertical spindles 5.5 kW Motor power upper horizontal spindle 4 kW Profile depth 20 mm Infeed table length 2500 mm Motorized height adjustment of the feed system Feed element before dressing Positioning of the working units: The working units are adjusted at the front of the machine with a mechanical digital display of the position Manual pump for lubrication of the work table Machine is WORKSHOP OVERHAULED IN TOP CONDITION 1 set of planing tools for FREE

SCM Sintex XL four-sided planer Working width min/max: 23-180mm Working height min/max 6-105 Number of spindles 4 Spindle system: Bottom Right 7.5kw Left Top 5.5kw Minimum workpiece length 300mm Two-stage feed speed 6-12m/min Spindle diameter 30mm Spindle speed 6000 r.p.m CE Certified Input table length 1700mm

Code: 0310 Brand: PINHEIRO MAQUINAS - PORTUGAL Model: PMA2 - MS - 510 2- Shaft Planing Moulding machine with moving head and multi-blade shaft for sawmill, wooden beams, planks, wooden roofs - CE Standard Technical data: Sturdy construction Working width mm 0-510 Working height mm 12-260 Automatic lifting Max cutting width mm 490 Max cutting height mm 120 Max stock removal lower shaft mm 12 Max stock removal upper shaft mm 15 Minimum workpiece length mm 415 intermittent pieces Minimum workpiece length mm 180 continuous Variable feed speed m/min 7/40 with display Horizontal shaft speed rpm 5300 Multi-blade shaft speed rpm 2300 Multi-blade shaft diameter mm 75 Saw blade diameter mm 200-400 Backstop safety devices Pneumatic pressure system on n° 8 upper drive rollers N° 3 lower drive rollers - Diameter mm 112 N° 4 tersa knives for each shaft Motor power Lo ...

Surface planer, dressing machine Maka AH530 with Centrofix shaft Very robustly built machine Planing width max. 530mm max. chip removal 20mm Adjustment of the planing strength with handwheel Drive motor 4kW Automatic motor brake 4-knife shaft Centrofix (comparable to Tersa) with new knives Casting tables slit table lips Low-noise design Swivelling stop with fold-down auxiliary stop Oscillating knife protection Suction nozzle 140mm Original paint, only reworked in places V-belt renewed New knives Dimensions approx. 2900 x 900 x 1200mm (LxWxH). Weight approx. 850kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers of this supplier".

Four-sided planer, model P 22 N, 2 sets of planer heads, reversible knife – strip planer knife, sound protection hood built in 85, Weight approx. 1500 kg Spindles: 4 Working width: 220 mm Working height 120 mm  ... more information

Four-way planer model P 23, five-shaft machine with groove bed, Shaft arrangement down/right/left/up/down, Number of planer shafts: 5 Planing height max.: 120 mm Planing width max.: 230 mm Dressing table length: 2,000 mm Feed power: 2.2 kW Feed speed: 5 - 24 m/min Speed: 6,000 rpm Spindle diameter: 40 mm Soundproofing hood good neat condition, year of construction 94, extraction distributor

Jet JPT-410 Dressing thickness planer G&-5086-o0383  ... more information

Weibert FS41 Dressing thickness planer 4-reversible knife shaft Driving equipment G&-5083-M376X  ... more information

Part Number 6368 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 130mm 7 spindles: 1) horizontal bottom 230mm 5,5kW 2) vertical right 130mm 5,5kW 3) vertical left 130mm 5.5kW 4) horizontal top 230mm 7,5kW 5) horizontal upper 230mm 11kW 6) horizontal bottom 230mm 18,5kW 7) universal 230mm adjustable at 360 degrees 5.5kW - all spindles adjustable up/down, right/left - all spindles equipped with an electric brake - spindle diameter 40mm - spindles 4 and 5 electrically adjustable up/down - from above 8 metal pulling introductory shafts, swivel including 2 double - from above 4 pulling rollers, rubber - pressure from above 2pcs - from the bottom of the ratchet - from the bottom from the side 3 clamps - from below 2 metal rollers, smooth, pulling - from the bottom 2 double rollers, pulling, rubber - pneumatically pressed shafts ...