planing machines used for sale

ready for use m used Pre-dressing table for copper mill planing machines Total length 2600 mm Planing width 240 mm  ... more information

– after technical inspection – Italian production – year of manufacture 2011 TECHNICAL PARAMETERS: planing width 240 mm planing height 130 mm spindle diameter 40 mm spindle speed 6000 rpm 1 bottom spindle 3 kW 2 right spindle 7.5 kW 3 left spindle 5.5 kW 4 upper spindle 6 kW 5 bottom spindle 5.5 kW six upper pulling rollers pneumatic pressure feed adjustable on the inverter feed speed range 5-25 m/min adjustable heads table top length 2480 mm electric brakes connection diameter 2 x 180 mm and 2 x 150 mm dimensions of the machine (L/W/H) 340 / 160 / 170 cm weight 2480 kg

WEINIG Unimat 500 – 5 spindles • Planing width max. 230 mm • Planing height max. 120 mm • Feed electronically frequency-controlled 5-30 m/min. • Feed motor 4 KW • 1st spindle bottom 5.5 KW • 2nd spindle right – motor right / left 11 KW • 3rd spindle on the left with electr. Axle adjustment FORWARD – BACK • 4th spindle top 7.5 KW with electr. Axis adjustment HIGH-LOW • 5th spindle bottom 5.5 KW • Spindle speeds 6,000 rpm. • Spindle diameter D=40 mm • Dressing table 2,000 mm with joining ruler • Feed roller in front of 1st lower tool pneumatic, high-low controlled • Lateral pressure roller in front of the left spindle, running and spring-loaded • Pneumatic pressure • Driven rubber roller in the run-out table • Electronic digital displays on 1/100 mm • Manual lubricant pump • Central positions of the lubrication points • GR ...

Heavy-duty single-sided planar calibration machine with ROTOLES system for demanding calibration of individual workpieces as well as for processing glulam panels.  ... more information

Planing width mm: 330 Planing height mm: 120 Inlet table length mm: 1800 Feed max m/min: 6-36 (inverter) Speed max: 6500 Number of spindles: 6 Spindle arrangement: 01 - Planing shaft - KW 15 01 - Spindles right - KW 15 01 - Spindles left - KW 15 01 - Spindles above - KW 15 01 - Spindles above KW 18 01 - Spindles below KW 15 Software: Control 100 PC Plus Spindle diameter mm: 50 Handling System Weight Kg: 5000

Knife shaft below - as good as new Knife shaft on top - as good as new  ... more information

Knife shaft below as good as new Knife shaft top as good as new. Exhibit , as new  ... more information

Planing machine (automatic feeder + tools 6 pcs) + cross-cut saw + conweyors. Everything 100% new. Production date 2015. Production capacity aprox. 20 000 short cuts / shift. Adjustabel speed 6-36 m/min, feeder 300 - 1200 mm. ... more information

Saege bushins in various lashings in stock Copper mill DK 14 Copper mill DK 16 Copper mill DK 17  ... more information

Working width: 410 mmLength of the planing table: 2.600 mmNumber of knives: 4 St.Motor output: 4 kWDimensions (L/W/H): 2.600 x 1.400 x 1.200 mmweight of the machine ca.: 561 kg: Tersa : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

Working width: 410 mmLength of the planing table: 2.200 mmNumber of knives: 5 St.Motor output: 5 kWweight of the machine ca.: ca. 411 kg: Tersa : Ja Dust suction hood: 120 mmturning speeds: 5.000 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

Working width: 520 mmWorking height: 300 / 3,5 mmMotor output: 7 kWNumber of knives: 4 St.Feed speed: 5/8/12/18 m/min.weight of the machine ca.: 680 kgDust suction hood: 150 mm: Tersa turning speeds: 4.500 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

Working width: 520 mmWorking height: 240 mmMotor output: 7 kWNumber of knives: 4 St.Feed speed: 5/8/12/16 m/min.weight of the machine ca.: ca. 500 kg: Tersa : Ja Dust suction hood: 120 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

Feed gearbox LENZE GKS 07-3N i=11,378 / 123 min-1  ... more information

Feed rollers 310 mm steel smooth 1,200 EUR Feed rollers 310 mm steel toothed 1,900 EUR  ... more information

BOTTENE – PASMEC moulding line for beads and planks, composed as follows: Automatic loader PASMEC, year 2005 : - PLC for work cycle programming - arm with suction cup system and vacuum pump - 1600mm useful stroke, brushless motor and prismatic guides - side aligners + pneumatic introducer pusher BOTTENE TARGET 606 moulder with 6 shafts, year 2017: – useful working measures 230x150mm – gimbal towing and differentiated pneumatic pressure – variable feed speed 6 – 60 mt/min with inverter – feed motor KW 7,5 – HP 10 – top feed wheel before the 1st shaft – group of tandem feed wheels in front of the 2nd shaft – overlapping feed wheels (top + bottom in the plane): at machine entrance, before the 1st shaft between the 4th and 5th tree at machine output, after the 6th shaft – short 1200mm entry plane – lubrication pump – protection cabin  ...

Inv. Num. : 6696 Type: Profiset 60 Producer: SCM Created: 2018 Parameters: Number of spindles: 5 Vacuum belt width: 25-230 mm Working height: 6-120 mm Max. speed: 6000 1/min Equipment: Swivel head  ... more information

-Feed roller at the top -example-link feeder roller REX HOMS 860 price EUR 2700.- -Spare part for REX planing machine, expert and fast  ... more information

Working width: 530mm, planing height: 3-300mm, four-blade shaft diameter: 125mm, max. rotational speed: 5000/min, max. chip removal: 8mm, feed: 8/16m/min, motor power: 5.5kW, length: 1200mm, width: 1200mm, height: 1400mm, weight: 680kg, with electric table height adjustment, two adjustable rollers in the thicknessing table and handwheel with digital display for fine adjustment.

20-27-518 Reismusas WOODLAND MACHINERY (new) Type MOTO530 Max. Working width 530 mm Max. Working height 300 mm Max. Cutting depth 8 mm Engine 4kW/380V/50Hz Dimensions of the Working table 1050x532 mm Spindle rotation speed 4800 rpm Min. Working length 280 mm Knives 4-30x530x3 Electrical filing 0.5 kW Electric height adjustment 0.33 kW Feed speed 5-20 m/min Transport Dimensions Weight 835 kg