Fabricante:
(Categoría: 503)
4-SHAFT SHREDDER 22 KW, sturdy carbon steel electrowelded structure, anti-wear side walls, loading hopper, shredding surface 600 x 800 mm., n.4 x 800 mm long shafts, n.30 anti-wear cutting knives 20 mm thick, n.30 routing disks, n.2 planetary gearboxes, n.2 x 11 kw motors, inversion on overload, n.18 rpm average, bespoke screen size, extraction prepared for connection with blowing system, SIEMENS LOGO PLC with simple panel for complete control, CE compliance, Users manuals.
4-SHAFT SHREDDER 15 KW, sturdy carbon steel electrowelded structure, anti-wear side walls, loading hopper, shredding surface 600 x 800 mm., n.4 x 800 mm long shafts, n.30 anti-wear cutting knives 20 mm thick, n.30 routing disks, n.2 planetary gearboxes, n.2 x 7,5 kw motors, inversion on overload, n.18 rpm average, bespoke screen size, extraction prepared for connection with blowing system, SIEMENS LOGO PLC with simple panel for complete control, CE compliance, Users manuals.
TWIN-SHAFT HYDRAULIC SHREDDER, Hopper size: 2.5 x 1.8 x 1.2 m (or customised), construction in robust high thickness carbon steel, shredding surface 1.500 x 1.100 mm, 2 counter-rotating steel hexagonal shafts with differentiated speed 16-21 rpm, no. 30 blades, 50 mm, 2 teeth, very easy blade maintenance, welded profile connection frame 1.3 x 1.0 x 1.5 m approx., No. 2 gearboxes, No. 2 electric motors 37,5 kW ( 100 Hp) total power - 400 V/50 Hz, bearings strategically positioned so as not to be affected by the processed material, the bearings are connected to a centralised lubrication point that can be connected (as an option) either to an automatic lubrication system or to a manual greasing point where the operator can intervene regularly., hydraulic control unit,, electrical control panel with PLC and machine wiring, automatic overload reversal with programmable number of reverse cycles ...
SINGLE SHAFT SHREDDER, V Rotor width 2.000 mm. 78,74 Rotor diameter 500 mm 16.69″ Motor power 90 kW n.112 knifes 60 x 60, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on ...
Technical data on the Lindemann shredding plant with light material separator, vibrating screen and conveyor technology:Manufacturer Lindemann GmbHType 820-20 (hammer mill)Year of construction 2010Drive power 110 kWRotor 820 mmThroughput capacity approx. 2 tonnes/hour, depending on materialScope of delivery:1 piece feed hopper with screw conveyor, colour grey1 piece hammer mill, Lindemann, type 820-20, colour beige/yellow1 piece discharge belt, roller belt conveyor, colour blue/grey1 piece magnetic roller conveyor, colour blue1 piece light material separator, colour white1 piece vibrating sieve, colour white1 blower, colour white1 piece Cyclone with big bag filling rack, colour white/greyComments:Unfortunately, no further technical data or information on the plant is available. However, the shredding plant is currently still set up, connected to electricity and could be inspected by appo ...
CMG SINGLE SHAFT SHREDDER TODAY AT REDUCED PRICE, mod TRM 1500, 80,5 kw drive, rotor width 1.500 mm., rotor diam. 400 mm., constructed in 2018, machine offered reconditioned, Possible addition of [extraction belt with magnetic drum](https://www.germanplast.eu/listings/4115563-used-extraction-belt -450-x-3-500-mm-magnetic-drum) (as new +14.000€), Constructors description:, High efficiency shredders: patented blade design, Patented shredder blade design provides first-class cutting precision. The blade is inserted into a V-shaped opening on the rotor. This type of assembly guarantees the highest resistance to mechanical stress and the best cutting performance. The precision of shredding provides dimensional homogeneity and the absence of small particles. In addition to the unique design of the blades, each CMG shredder is equipped with advanced controls to independently adjust the motor ...
ID3259 Doppstadt DW2560 BK Bison year/Year of construction 2003 approx. 8130 hours/hours 28 t Wood shredder, screening system new approx. 1200 hours ago, gearbox overhauled and shaft replaced approx. 1200 hours ago Wood shredder, screening plant new approx. 1200 hours ago, gearbox overhauled and shaft renewed approx. 1200 hours ago
ID3254 Franzoi TAZ280 year/Year of construction 2022 approx. 50 hours/hours 16.5 t Wood shredder, 2-shaft shredder Wood Shredder, 2 Shaft Shredder ... más información
ID3253 Doppstadt AK510 K year/Year of construction 2014 approx. 5210 hours/hours 29 t Shredder Shredder ... más información
FOLCIERI GRANUATOR TOP800, 800 mm. wide rotor, 530 mm rotor Ø, 90 kw ABB drive, constructed in 2002, complete with control cabinet, now connected and running, available either AS IS or RECONDITIONED, installed power : 90 ... más información
LINDNER MICROMAT MS2000, rotor length 2.025 mm., n.104 knives, knives size 43x43x23 mm., screen size 50 mm., V-belt 75 kw drive 400V 3Ph.50 Hz 1500 rpm, rotor speed 80 rpm, hydraulic ram, constructed in 1997, offered RECONDITIONED, installed power : 75 ... más información
- Mutton NZ 700 E - Year of construction 2007 - incl. magnet - Incl. all-metal detector and ejection - Incl. feed belt and discharge belt - good condition ... más información
Technical data shredder:Manufacturer Lindner Recyclingtech GmbHType Micromat 2000Year of construction 2012Operating hours 5,842 hours, as of MarchDrive power 160 kWFilling opening 2,790 x 2,405 mmFilling height 2,594 mmCutting chamber volume 4.5 m³Number of sieve sheets 4 piecesDischarge width 2,225 mmInput density 160 up to 200 kg/m³Input granulate
Cutting force: 900 t., Cutting width: 940 mm, Max cutting stroke: 600 mm, Cutting length variable, Cutting strokes per min. approx. 4, Pressure material clamping cylinder: 180 t., Pressing force press cover cylinders: 2 x 350 t, Pressure force supply cylinder: 120 t., Press box dimensions, opened: 7000 x 2400 mm., Press box dimensions, closed: 7000 x 940 x 600 mm, Cutting capacity square: 110 mm (e.g. with normal, steel 37 kg/mm²), round 120 mm plate 70 x 700 mm, Production capacity approx. 20 tons/hour,, depending on the type of scrap, cutting length and the load on the machine., Drive power: 1x diesel engine, Scania DC16 500 HP., Pumps High-pressure axial piston pumps with self-regulating flow. Manufacturer Bosch-Rexroth., Year of manufacture: 2012, Weight of the machine approx.: 75,000 KG, Cutting force: 900 tons., Cutting width: 940 mm, Max cutting stroke: 600 mm, Pressure material ...
fire: IDROMEC, Model: T1000x8000LS, Status: Used, non-refurbished, approx. 2,800 working hours, Year of construction: 2008, Shearing force: 1000 ton, Hold down force: 140 ton, Box length: 8 meters., shear throat: 900x700mm, Open box width: 3280mm, power unit: Electro 310 kW, Piston pumps: main pump by Rexroth, Control cabin yes, Remote control AUTEC, PLC: Semi-automatic cutting and baling cycle, Supporting legs: N.4 oversized hydraulic supporting legs/feet, Total weight: approx. 75 ton, Warranty: none, fire: IDROMEC, model: T1000x8000LS, Year of construction: 2008, shearing force: 1000 ton, Hold down force: 140 tons, box length: 8 meters., shear throat: 900x700mm, Open box width: 3280 mm, power unit: Electro 310 kW, Piston pumps: main pump by Rexroth, Total weight: approx. 75 ton, Warranty: none
Small but very robust and powerful shredder for a wide range of tasks such as old cables, plastics, wood, etc. With hydraulic, electronically controlled feed. Drive 18.5 + 2.2 kW (rotor + feed). Rotor shaft with connections for connecting a cooling unit (e.g. when used for old NYM cables. The machine is and little used from our demo machine inventory. The machine is offered with a one-year used machine warranty.
AGICOM recycling machines: Very good, almost as good as new single-shaft shredder for old cables, wood The cutting width or rotor length is 400 mm, 30 mm indexable cutting plates are installed. The machine has a hydraulically driven gate valve equipped with pressure monitoring. The machine has only 35 hours of operation and is still coated with the original paint in the cutting room. • Year of construction 2007 • Propulsion: 9.2 kW • Hydraulic pusher: 1.5 kW • Weight of single-shaft shredder Bano MAC400: approx. 850 kg
total power requirement: 3,0 kWweight of the machine ca.: 0,5 tdimensions of the machine ca.: 1,6 x 1,4 x 1,6 mSingle shaft shredder cutting system chip shredderPerformance values: Motor cutting unit 3.0 KWTemperature range 15-40 degrees CelsiusVoltage 400VPower consumption 3.0 KWLength x width x height with flat gear 1.50 mm x 575 mm x 315 mmMounted on a mobile base frameincluding mobile/tiltable bucket cartincluding documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Forrec AE-600R single-shaft shredder: Used and very powerful single-shaft shredder for a wide range of applications. Easy replacement of perforated screen, hydraulic pusher Technical data shredder Forrec AE-600R: 30 kW; 400 volts Cutting blade: 43x43 mm Rotor length: 600 mm Rotor diameter: 250 mm Dimensions: 1550x1500x2100 mm Weight shredder Forrec AE-600R: approx. 1600 kg
For sale is a processing plant for third-party take-back polystyrene - fully functional. Feeding table: 2000x2000x900 Belt conveyor: 1420x4000 Slope: 21° Transport speed: 4-16 m/min Design: (50Hz):8m/min Styrofoam mill: 2180x2496x1590 Filling opening: 1500x1000, weight 1500kg ... más información