Fabricante:
(Categoría: 503)
MOCO AZ11 TWIN-SHAFT SHREDDER Manufacturer: MOCO Type: AZ11 Shaft length: 400 mm Dimensions: 2320 x 1000 x 1950 mm Weight: 1300 kg Installed power of main engine: 15 kW Shredding knives: 2 X 12 ROTATING BLADE (+ CLEANING BLADES) THE SYSTEM MOCO AZ 11, shredder with slow and low noise running hexagon working shafts. Low vibration and minimal maintenance, compact design, robust welded construction, low power consumption, individually replaceable cutting discs. THE ELECTRIC The control of the AC geared motor is equipped with an automatic overload-dependent reverse control. The machine can be inspected in our warehouse in Székesfehérvár-8000 Hungary. For further information please contact us.
Shredder HSM Powerline FA 500.3, for large quantities Specifications Manufacturer: HSM Type: Powerline FA 500.3 Year of construction: 2013 Drive power: 7.5 kW Input width: 500 mm Cutting width: 3.9 x 40 mm Security level (DIN 66399 / ISO / IEC 21964): E-3 / F1 / O-3 / P-4 / T-4 Cutting capacity in 80g/m² sheet: 180-200 Hopper volume: 530 l Noise level (idle): approx. 65 dB(A) Weight: 905 kg
Stationary universal shredder Komptech Crambo 3400, built in 2011, including hopper and elevation Manufacturer: Komptech Type: Crambo 3400 Year of construction: 2011 Hours: 3912 Propulsion: 160 kW Roller speed: max. 32 min-1 Roll length: 2820 mm Roller diameter: 610 mm Throughput: up to 45 t/h Strainer: 12.5 cm Dimensions: 5772 x 2949 x 3191 mm Weight: 19000 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment takes place ex works, without guarantee and guarantee.
Single Shaft Shredder "Obsolete" Propulsion: 37kW Hydraulics: 1.5kW Rotor diameter: approx. 400 48 rotor blades 3 stator knives Incl. segment floor ... más información
USED REEL SPLITTER JOVISA, Constructed in 6/2004, working width 2.600 mm, working height 1.000 mm, 50 Tons cutting force, Complete with hydraulic pack, No.2 pistons, Power 20kw, 40 A, Control panel, Good working conditions ... más información
Cone crusher Krupp Brand: Krupp Type: 91-20 Year of construction: 1999 Incl.: electric motor, hydraulic system, electric control and new wear parts. Type: 90-8 Year of construction: 2000 Incl.: electric motor, hydraulic system, electric control and new wear parts. ... más información
Brand: PALLMANN, Model: IPS 500x1000, Year of construction: 2001, Electro: 75 KW, Spare parts: Cutting blades and others., Warranty: none, Terms of delivery: EXW Germany, Machine is ready for use and can be put into operation quickly at any time., fire: PALLMANN, model: IPS 500x1000, Year of construction: 2001, Electro: 75 KW, Warranty: none, Terms of delivery: EXW Germany
Large Four Shaft Shredder with Two Cutting Shafts and Two Feed Shafts. Until now, the shredder has been used as a pre-shredder for the recycling of old cables. Due to the hydraulic tamper, the shredder can also be used for bulky materials. Changing the screens is hydraulically assisted and therefore easy to do. On request, the shredder can also be supplied with the articulated conveyor belt shown here. The conveyor belt is equipped with a magnet in the upper pulley for iron separation.
Brand: HUSMANN, Model: Crusher /HLI 1225 E/S, Serial No.: 11518, Year of construction: 2016, Drive: 200kW, Crusher: Single-axis crusher with adjustable speed of up to 36, rpm., Blade work: 16 knives, blade width 100 mm, External diameter of shaft: 660 mm, Internal diameter: 480mm, Shaft length: 2,560 mm, Cutting facility opening: 1,200 x 2,560 mm, Drive: electro-hydraulic, with automatic, adjustable reversing, device. The slow-running drive can be operated with, 400 bar sauce pressure, thereby transmitting a torque, of 110,000 Nm., Dimensions:, Height: 5800mm, Width: 5039mm, Length: 2800mm, Weight: 21 tons., Terms of delivery: EXW Germany, fire: HUSMANN, model: Crusher /HLI 1225 E/S, Serial No.: 11518, Year of construction: 2016, Drive: 200 kW, External diameter of shaft: 660 mm, Internal diameter: 480 mm, Shaft length: 2.560 mm, Cutting facility opening: 1,200 x 2,560mm, Height: 5800mm, ...
Brand: MUTTON, Model: VB750 E, Serial No.: 110/620, Year of construction: 2007, Drive: 2 x 110kW, Speed: approx. 1800 minutes, Working shafts:, Rotor diameter: approx. 670mm, Design: 5-piece 7/7 discs, Shaft length: 1800mm, Dimensions:, Height: 2700mm, Width: 2500mm, Length with belt: 9710 mm, Belt width: 1400 mm, Belt length: 14400 mm, Radio control: Hetronic GA609, Weight: 20 tons., Terms of delivery: EXW Germany, fire: MUTTON, model: VB750 E, Serial No.: 110/620, Year of construction: 2007, Drive: 2 x 110 kW, speed: approx. 1800 minutes, Rotor diameter: approx. 670mm, design: 5-piece 7/7 discs, Shaft length: 1800 mm, Height: 2700 mm, Width: 2500 mm, Length with belt: 9710 mm, Belt width: 1400 mm, Belt length: 14400 mm, Radio control: Hetronic GA609, Weight: 20 tons, Terms of delivery: EXW Germany
ID2841 Wagner WS22 year/Bauahr 2010 ran only a little 3.7t Shredder, 22 KW Shredder, 22 KW ... más información
ID2850 Pallmann year/Bauahr 2001 70 t Impact hammer mill, electric motor 500 KW 400V, output: up to 100 tons/hour, infeed width 2000 mm, rotor diameter 1600 mm, 6 upper feed rollers Impact hammer mill, electric motor 500 KW 400V, output: up to 100 tons/hour, infeed width 2000 mm, rotor diameter 1600 mm, 6 upper feed rollers
ID2434 Komptech Crambo 5000 Hook year/Year of construction 2007 approx. 6100 hours/hours Shredder Crambo 5000 hook, dispenser without axes, twin-shaft shredder as slow-speed Shredder Crambo 5000 hooks, dispenser without axles, twin-shaft shredder as low-speed ... más información
Builder: WILLIBALD Model: MINISHARK MS 3000 Engine: PERKINS 130 kW (180 HP) Data: L. 8.250 x W. 2.500 mm x H. 3.300 mm Year: 2017 Operative Hours: 3.900 h Hourly Production: 40 m³/h Shredding System: 18 HAMMER Rotor Data: D. 700 mm Fuel Tank: 140 L Weight: 9.000 kg Price: ON REQUEST! ... más información
Metso 2000 shredder Opportunity for bale openers, bag openers, construction waste, bulky waste and containers! The right one for little money! Perfect for wheel loader loading or grabbing excavators! Electro-hydraulic drive With vibrating chute With control cabinet with Siemens touch panel Hydraulic power pack with hydraulic tank approx. 1000 liters with oil tank heating! Dismantling and loading from the site as is! Operating instructions 110kW electric motor
Specifications Cutting width: 3.8 x 50 mm Productivity: approx. 70-75 sheets (A4, 70g/m²) Cutting speed: 217 mm/s Power supply: 400 V / 2.2 kW Year of construction: 1991 Price: on request DIN 66399 P3, O2, T3 ... más información
Manufacturer: Ing.Drüge, Hamburg 6 shaft shredder, YOC 2011, 15,0+22,0 Kw., 400 V., with control cabinet incl. reversing circuit Cutting opening: 600x800 mm, incl. hopper and steel construction Ideal for: files, PC hard drives, CDs, hollow bodies up to 3 ltr. ... más información
Twin Shaft Shredder, Fabr. Shred Tec USA, opening: 1800x800 mm, drive 2x 37 Kw, 400 V., with control cabinet and inlet tray and frame, weight: approx. 10,000 kg, both motors are new. ... más información
Single-shaft shredder with 2500 mm rotor width Rotor diameter 500 mm electro-hydraulic drive 250 kw with hydraulically adjustable counter knife Operational ... más información
Lindner Recycling Shredder used., Brand: LINDNER, Model: Universo 2800, Year of construction: 2010, Number of knives: 68 pieces, Knife shape: 87x87x38, Sieve perforation: 128 mm, Rotor speed: 80 rpm, Weight: 26 tonnes, Electric motor: FIG, Power: 132 kW, Spare parts: Cutting blades and others., Warranty: none, Terms of delivery: EXW Germany, Machine is ready for use and can be put into operation quickly at any time., fire: LINDNER, model: Universe 2800, Year of construction: 2010, Number of knives: 68 pieces, Knife shape: 87x87x38, Sieve perforation: 128 mm, Rotor speed: 80 rpm, Weight: 26 tons, Electric motor: ABB, power: 132 kW, Spare parts: Cutting blades and others., Warranty: none, Terms of delivery: EXW Germany