prensas: otras usadas para la venta

Inv. Num. : 7474 Type: TPX 100 Producer: Teca-Print Created: 2006 Parameters: Vertical stroke: 100 mm Capacity: 1800 cycl./h Machine dimensions: 380 x 762 x 560 mm Weight: 30 kg Components of the offer: Base MS250 Cross Table KT30 Swab Feed  ... más información

Inv. Num. : 6259 Type: AMIGA Producer: KOMFI Created: 2007 Parameters: Switch-on hours: 578 h Format: B2/B3 Equipment: Replacement heating coil Lower Pressure Roller Rear Traction Roller Compressor BECKER  ... más información

Inv. Num. : 6673 Type: SPIEDRA SP-7610 Producer: GILCO Created: 2008 Parameters: Maximum format size: 760 x 1070 mm Screen frame format: 1200 x 1390 mm Max. material thickness: 5 mm Equipment: UV curing tunnel AEROTERM UV VARIO 3 Technical parameters of the tunnel: Strap width: 770 mm Irradiation width: 760 mm Length: 2500 mm Speed: 5-30 m/min

BARCODE PRINTER / LABEL PRINTER CAB A4 + Equipment / Additional information: Printer method: thermal transfer / thermal direct Resolution: 203 dpi, 300 dpi or 600 dpi Print speed: 200 mm / sec (203 dpi), 152 mm / sec (300 dpi) Maximum print width: 116 mm Interfaces: USB 2.0, RS232, Ethernet 10/100 Base T, 2x USB master interface, slot for CompactFlash memory card

MECHANICAL PAPER SCALE WITH HANDPROBE PUNCH M. No.: 618371 Equipment / Additional information: Mechanical Paper Scale Schiltknecht Switzerland F. No: 8351  ... más información

PRECISION SCALE Ser. No.: WF131434 Readability (d) : 0,01 g Weighing range (max) : 3000 g Reproducibility : 0.01 g Linearity : ±0,03 g Smallest part wight for piece counting : 20 mg Reference quantities at piece counting: 10, 20, 50, 100, 200 Weighing Units: g, ct, Ib, oz, d, ozt, dwt, mo, tl h, tl c, tl t, t, bt, n Recommended adjustment weight, not added (class): 3000 g (F1) Warm-up time: 2 hours Stabilization time (typical): 3 sec Operating temperature : + 5° C + 35° C Humidity of air: max. 80 % (not condensing)

ERSA HOTFLOW - 7 Continuous dryer / tunnel dryer / belt dryer for drying screen prints on thin films Type: HOTFLOW – 7 Convection oven as tunnel dryer / belt dryer / continuous dryer for Drying of board materials on top and bottom. The machine was used to dry screen printing on thin films. 4 heating zones at the top, 4 heating zones at the bottom, for drying on both sides. Rolling rods at a distance of approx. 4.5 cm on 2 transport chains as support for plates Temperature range from 20° to 300°C Nominal power Pn = 72 KW Rated Current In = 106 A Voltage: 3 x 400/230V Fuse: 3 x 125 A Frequency 50 Hz Power 67 KW Year of construction 2000 Dimensions: Length: 5250 mm Width: 1300 mm Height: 1750 mm (incl. warning light) Height: 1450 mm (without warning light) Dry section: Length of heating zones: 3300 mm Transport width: 500 mm The machine can be use ...

Toshiba B-EX4D2 Direct Thermal Label Printer -Printing technology: Direct thermal -Resolution: 203 dpi -Max. print speed: 305mm/sec -Max. print width: 104mm -Max. print length: 1,498mm -  ... más información

For sale a Dresser and Wayne CNG natural gas tap in good condition.  ... más información

For sale a GreenField CNG natural gas tap in good condition.  ... más información

Year of construction: October 2023 Printing width: 782 mm incl. Editor Super Tracker Controller, UV curing system, cooling system and roller section for integration into a Bobst die-cutting machine with few operating hours  ... más información

3 printunits (1x possible copy stop) We have printing cylinders of : - 24" - 23" 2/6 - 25" Max web width 520 mm Rol to Rol Also, the following parts: - Cross perforating cylinder : 2x 24" - Jump perforating rings - Ranking rings : 4x 24" + 2x 25" - Pinfeed rings : 2x single + 2x double

Goebel OPTIFORMA 520 Year 1985 Size: Width 520mm Unwind 5 printing units wet offset 4 bays in 25 inches Filing Hole Cross Perforation Cylinder Display: roll/roll roll/fold Machine is in production  ... más información

Printing and packaging machine for labels and continuous forms with 2 dry offset units, integrated UV final drying (2x), Eltromat and register control pressure for perforation. Working width: 520 mm print width: 510 mm Appendix: Roll Delivery: stack or sheet (A4 or A5), Shed delivery, smallest sheet 4" Printing units: dry offset; 2 x 24" and 1 x 25" (Color assignment: 2/0 or 1/1, but only UV drying, i.e. only on the front) Punching cylinders: Punch "top" (VS): 23 2/6" and 24" – 1 cylinder punch each "bottom" (RS):23 2/6", 24" and 25" – 1 cylinder each Perforation: Longitudinal: only continuously or arbitrarily over punching plate, Transverse: (two cylinders of the same format can be used at the same time can be used!) 16" - 3 cylinder part. 4" 17" – 1 cylinder part. 4 ¼" 18" – 1 cylinder part. 4 3/6" 20" – 1 cylinder part. 2 1/2, 5" 22" – 1 cyl ...

From a current recycling we offer you Handtop, Hybrid UV Printing System, HT 3200 UV FG 8. Year of Make: 2017 Condition: 3-4 Original price: 55.800,00 Host computer and screen missing Head of Asset Manager: Alexander Pradt Phone: +49 202 - 25727 3150 Mail: a.pradtakf.de We will be happy to provide you with details upon request. Location: 68753 Waghäusel The sale is without warranty Subject to prior sale

Label printing machine GALLUS R 200 B -Year 1999, Only one owner -Max width 200 mms. -Unwinder + Ferrarini Benelli Corona treatment (to be serviced) -6 letterpress printing units with automatic washing devices -1 delam/relam group for printing on glue with the first 2 letterpress printing groups -5 UV lamps -1 left rotary screen printing unit -1 right rotary screen printing unit interchangeable with typographical units -1 UV lamp with cooled cylinder -1 flexo unit with the possibility of laminating -1 UV lamp with cooled cylinder -1 flat die group -2 rotary die groups -Waste breakage control -Lateral trimming blades -Rewinder -Machine manuals / original Gallus spare parts ACCESSORIES SOLD TOGETHER WITH THE MACHINE: -SET OF PRINTING CYLINDERS + SHOULDERS AND GEARS, FLAT DIE GEARS, MAGNETIC CYLINDERS -ROTARY MAGNETIC CYLINDERS FOR DIE CUTTING -FLAT DIE DIES  ...

LABEL PRINTING MACHINE MIDA MD 280 TRE -Year 2007 -Max web width 280 mms. -5 printing units 1 flexo with separate pump for the varnish -1 automatic rewinder max size 800 mms. -1 semi-rotary die cutting unit from 50-275 mms. -Hot stamp unit -1 flat die cutting unit -max speed 60 m/min -6 UV VTI lamps -Ink ducts laser cut inks -Video inspection BST Powerscope -Electronic tension control, LCD monitor 15” -All electronic positioning and pre-register controls -Full optionals machine, in production,Top conditions, any test possible

Pad printing machine Teca Print TPE 100; good condition; cleaned and tested; 1.Color; Formats 100x100mm or 150x100mm; Compressive force 250N; Power max.1800/h; incl. suitcase platesetter. Pad printing machine Teca Print TPE 100; good condition; cleaned and checked; one color; size 100x100mm or 150x100mm; force of pressure 250N; speed max. 1800/h; incl.uv light box.

Manual hand table for printing on paper, cardboard, film, PVC, acrylic etc. Up to 10 cm in thickness With counterweight Printing table: External dimensions: L 2395 mm x W 1675 mm x H 800 mm plate: 1250 mm x 1740 mm 100 x 100 cm weight: 150 kg min screen: 50 x 50 mm maximum printing frame: 1100 x 1500 mm

Vibrating table FKS JL-350  ... más información