máquinas de goma usadas para la venta

ROLL DIAMETER 550 mm POLL WORKING LENGTH 1530 mm MOTOR POWER 110 KW DIMENSIONS: 630022301830 (L×W×H) SPEED RATIO OF ROLLS 1:1.27 Structure description 1 Base frame is welded and annealed . 2 The motor is 3- phase asynchronous motor, protection levels :IP54. 3 The driving type :Single out- shaft or double out- shaft. The speed reducer is hard gear reducer,which has long service life and low noise. 4 The roller bearing is rolling bearing with Low noise, save power almost 20%. the roller bearing use grease lubricating. 5 The nip adjusting Motor type 6 This machine is equipped with two pieces of moving blade. 7 Safety device : Pull the safety rod to achieve emergency stop. It can be installed with kick stop device and emergency stop device for safety. 8 The electrical design theory conform to the TWO ROLL MILL specifications strictly . It is equipp ...

5501500 TWIN SCREW 1. 1 PC 5501500 OPEN MILL RUBBER MIXER 2. 1 PC 5501500 OPEN MILL RUBBER MIXER 3. ELECTRIC CONTROL CABINET WITH DRIVER 4. DIRECT CONNECTION (COUPLED) 5. BRONZE BEARINGS 6. AUTOMATIC LUBRICATION 7. 160 KW 990r/min  ... más información

L/D=20.7 External dimensions 2700×1000×1400(LxWxH) Screw stiffness HRC65-68 Screw diameter 90mm Engine power 30KW/1470rpm SCREW LENGTH 1860 mm Heating section number/power 6kw×2  ... más información

ROLL DIAMETER 400mm POLL WORKING LENGTH 1000mm MOTOR POWER 45 KW DIMENSIONS: 447118501760 (L×W×H) SPEED RATIO OF ROLLS 1:1,27 Structure description 1 Base frame is welded and annealed . 2 The motor is 3- phase asynchronous motor, protection levels :IP54. 3 The driving type :Single out- shaft or double out- shaft. The speed reducer is hard gear reducer,which has long service life and low noise. 4 The roller bearing is rolling bearing with Low noise, save power almost 20%. the roller bearing use grease lubricating. 5 The nip adjusting Motor type 6 This machine is equipped with two pieces of moving blade. 7 Safety device : Pull the safety rod to achieve emergency stop. It can be installed with kick stop device and emergency stop device for safety. 8 The electrical design theory conform to the TWO ROLL MILL specifications strictly . It is equipped  ...

5m doubling belt max. 1.0 m finished product, Fabr.Troester, continuous powder machine Fabr. PEKU, 2-fold mandrel winder with release film Fabr. Stahlcontor Hameln ... más información

3-roll calender, color Troester, size 500 x 1,100 mm ... más información

Stock blender for 1800 mm rolling mill, make Berstorff, mechanical laying via spindle drive 3.0 KW, pull roller with 5.0 KW Vario gearbox ... más información

Stock blender for 84" rolling mill, make AGILA, with hydraulic laying, pull roller cooled, drive 5.5 KW ... más información

125 mm cold-feed siftext rudder with strainer or strand injection head for calender loading ... más información

Cold-feed pin extruder, EEK 125.10 M, screw speed 10 to 60 rpm, drive 135 KW AC ... más información

Cantilever Batch-Off, strip width 2-fold, 40 to 120 mm, strip thickness 6 to 12 mm, Throughput capacity 500 to 800 kg/h ... más información

Fine strainer system from UTH, type Roll-Ex 70 TRF ... más información

Powder machine PM 1000 Z , Fabr. PEKU / Germany, for powdering rubber films and sheet goods up to 1000 mm passage width, ... más información

90s cold-feed profile extruder, GE 90 x 16 D Vac, make Troester,  ... más información

120 mm cold feed pen convert-extruder, GE 120 SC, make Berstorff, output capacity up to 1,000 kg /h as a power extruder with strip spray head, complete rebuild mechanically and electrically in 2024  ... más información

complete body GK-160 UK rebuilt ready for installation, with new mixing chamber, new ZZ-2 rotors with new bearings and your dust seals  ... más información

Velocity: Adjustable roller: 24/28 rpm = 15.1/17.6 m/min Fixed roller: 34 rpm = 21.3 m/min Friction: Switchable from 1 : 1.2 to 1 : 1.4 Power: Three-phase motor, 11 kW, 400 V, 50 Hz Roller temperature control: Chamber-drilled rollers with rotary unions Bearing: Sliding bearing Bearing lubrication: Oil Circulation Lubrication Gap adjustment: Manually by ratcheting Material guide jaws: Two-piece with centrepiece, non-folding Electrical control: Conventional contactor control Safety: Rocker above the rollers, emergency stop buttons on the side stands and knee switch plates

Bradley & Turton Upstroke Presses Tonnage: 50ton Electric Platens Double Daylight 15” (375mm) sq. platen Fully guarded With individual pump units  ... más información

Roll cooling: Rotary joints Speed: Fixed speed, not variable Back roll: 14.7 min-1 = 27.7 m/min Front roll: 17.8 min-1 = 33.6 m/min Friction: 1 : 1,21 – fixed friction ratio Roll bearings: 4 NEW anti-friction roller bearings Lubrication: Lubrication points Nip adjustment: Manual adjustment by lever Overload protection: Breaking plates Stock guides: Steel brackets, left side with hydraulic lateral movement; both sides pneumatically retractable Material tray: Steel tray underneath the rolls Strip cutter: 3 pneumatically retractable cutting knives; 2 knives with motorized width adjustment Motor: Siemens AC motor 132 kW, 380/660 V, 50/60 Hz, 1480 min-1 Gear reducer: Flender straight bevel gear pair Coupling wheels: Herringbone gearing, very good condition Pinion: Herringbone gearing, very good condition Electric controls: Conventional contactor controls year  ...

Press 800 x 1000 Clamping force cca 3000kN Electric heating ... más información