fresadoras usadas para la venta

x-travel: 500 mmy-travel: 350 mmz-travel: 380 mmtable-size: 790x360 mmspindle turning speed range: 63-4000 U/minspindle taper ISO: 40 quill stroke: 50 mmrange L-W-H: 1600x2000x1850 mmdigital readout: PHILIPS weight of the machine ca.: 1.4 tActive Digital read outMisc.accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 250 mmgear width: 40 mmmax. module: 8 min. module: - Control: total power requirement: 9,7 kWweight of the machine ca.: 6,5 tdimensions of the machine ca.: 2,65 x 1,90 x 2,05 m- CNC control- electric handwheel- new motors/ electrics- various change wheels- chip conveyor- coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 620 mmgear width: 90 mmmax. module: 12 min. module: - no. of teeth: 6 - 100 pivoting angle: 0 - 90 Gradspindle taper: metr. 100 milling head speed: 28 - 56 U/minconnected load: 18 kVAControl: total power requirement: 14 kWweight of the machine ca.: 12 t- CNC control- electric handwheel- new motors/ electrics- various change wheels- chip conveyor- coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: . mmy-travel: . mmz-travel: . mmControl: Heidenhain type: TNC 135 table surface area: 1300x400 mmturning speeds: 2800 U/mincoolant: total power requirement: kWweight of the machine ca.: tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

x-travel: 2500 mmy-travel: 1300 mmz-travel: 900 mmControl: Heidenhain iTNC 530 table surface area: 2500 x 800 mmtable load: 5,0 ttool taper: SK 50 DIN69871spindle turning speed range: 36 - 4000 U/minfeed range: 2 - 12000 mm/minmain drive: 25 kWtotal power requirement: kWweight of the machine ca.: 17 tdimensions of the machine ca.: 8,4 x 4,5x 3,8(3,9) mThe main engine was overhauled in September 2022 for € 6,000.The machine was partially overhauled in 2007Scope of overhaul:Feed motors were overhauledNew Heidenhain iTNC 530 control system with newmain spindle drive (Siemens)Retention of the control cabinet and feed drivesGeometric overhaul of the machineOverhaul of the tool changerDefective guideway covers were repaired or replacedThe milling head was completely overhauled approx. 3 years ago.Equipment:CNC control Heidenhain iTNC 530Horizontal/vertical swivelling milling headSeparate CN ...

MAHO Lid CNC MH 600E Metal milling machine with rotary table 500mm MAHO – Deckel MH 600 E CNC Metal - Milling Machine X = horizontal longitudinal axis travel 600 mm Y = vertical axis 400 mm Z = horizontal travel 400 mm B= NC rotary table d= 500 mm 7 T grooves 14 H 7 Spindle holder ISO 40 Quill spindle stroke 80 mm Spindle speeds 80 - 4000 rpm Gear stages 18 Feed range 0.1 - 2000 mm/min Rapid traverse: x = 4 / y = 3 / z = 5 m/min Table load workpiece and clamping device 300kg Spindle motor 4 kW 400V 50 HZ Total power requirement 16 kVA YOC 1988 With coolant device Machine weight ca. 2,6 t Weight: 2500 kg with path control CNC 432 E Handwheel splash guard booth, Switch-on hours: 29004 G&-5018-M3OWI Accessories: Kohn Spann - Vice with stop 130x 180mm G&-5019-M3OWI

No. 3999: 1 used Universal tool milling machine Make HERMLE, type UWF 801, 1988 with Heidenhain TNC 135 Working range: 500 x 430 x 400 mm, drive power: 3 kW Accessories: Rigid Table 800 x 390 mm Chip tray Documentation Other: Spindle SK 40 Speed range 50 - 2500 min-1 Space requirement approx. 3 x 3 x 2 m Weight approx. 1400 kg

Table clamping surface: 600 x 1100 mm traverse path x: 800 mm traverse path y: 450 mm traverse path z: 500 mm Quill stroke: by hand approximately 50 mm of spindle speeds: 63-3150 rpm stufenl feeds. adjustable: 0,1-1500 mm / min rapid traverse: x/y/z 4.5/2,6/3 m / min. Supply: 380 V, 5.5 kW space: 3000 x 2500 x 2030 mm weight: 4000 kg

CORREA A 25/30 fixed bed milling machine Status: Running. Table dimensions: 3,000 x 1,000 mm Number of T-slots: 8 T-slot dimensions: 22 mm X travel: 3,000 mm Y travel: 1,200 mm Z travel: 1,000 mm Head model: Universal Manual Tool clamping: Hydraulic Cone: ISO 50 Maximum weight on table: 7,000 kg Approximate machine weight: 19,000 kg Machine dimensions: 7,810 x 4,664 x 2,750 mm The year of manufacture 1988, in 2018 the motor, head and program + screen were changed. You can test we have it in operation.

Machine Details Warehouse number 1105-03692 Machine type Milling machine - Universal HERMLE brand Type fp 1000 Year of construction 1988 Control type CNC Control heidenhain 355 Storage location HAGUENAU Country of origin Germany Delivery time IMMEDIATELY Freight base EXW Technical details x-travel 700 mm y-travel 630 mm z-travel 500 mm Control heidenhain 355 Tool holder SK 40 (DIN 69871) Table clamping surface: 1000 x 490 mm Spindle speed gear stage 1 25 - 400 1/min. Spindle speed gear stage 2 401 - 1260 1/min. Spindle speed gear stage 3 1261 - 4200 1/min. Feed 5 m/min Rapid traverse 10 m/min Swivel of the milling head + / - 90 ° Pinole diameter 110 mm Pinole stroke 95 mm Total power requirement 18 kW Machine weight approx. 5 t Information with coolant device Sale without clamping devices

Bearing number 1105-02690 Machine type Milling machine - Universal Make HERMLE Type UWF 1000 Built in 1988 Control type CNC Storage location FRANCE Country of origin Germany Delivery time SOFORT Freight base EXW Technical details x-way 700 mm y-way 630 mm z-way 500 mm Control heidenhain 355 Tool holder SK 40 (DIN 69871) Table clamping area: 1000 x 490 mm Spindle speed Gear stage 1 25 - 400 rpm. Spindle speed Gear stage 2 401 - 1260 rpm Spindle speed Gear stage 3 1261 - 4200 rpm Feed 5 m/min Rapid speed 10 m/min Swivel of the milling head + / - 90 ° Pinole diameter 110 mm Pinole stroke 95 mm Total power requirement 18 kW Machine weight approx. 5 t Information with full cabin coolant device Sale takes place without clamping equipment approx. 8500h switch-on hours

Description: Attention: As the forklift is still used for sporadic loading, collection is only possible at the end of the loading period. A vehicle with an access ramp is required for collection.serial number: 351,802,030, loading capacity: 3 to, length of forks: 2,000 mm, Approx. Onsite Dimension. (l x w x h): 4,500 x 1,200 x 2,500 mm, weight approx.: 5,000 kg

x-travel: 700 mmy-travel: 550 mmz-travel: 500 mmspindle taper ISO: 40 control: Heidenhain type: TNC 155 milling-head swivable +/-: boring spindle: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal tool-feeding machine, used universal milling machine, used Type FU 250 x 1000/2 Fabr. WMW Auerbach Built: 1988 Table size/ table: 1130 x 255 mm Laengsmotion/ longit. move: X 690 mm Horizontal movement/ horiz. Move: Y 190 mm Vertical movement/ Vert. move : Z 360 mm Tool holder/taper: ISO 40 Spindle speeds R+L infinitely/ speeds of spindle ( left/right) 56 - 2800 rpm. Pre-shot stepless all axes X, Y and Z/ feeds all axis 10 - 630 mm/min / 250 mm/min Drive power/ load 3.8 kW Weight: 2 t Specification: Vertical head,shock head

Rolling milling machine Koepfer 153 A/CNC Manufacturer Jos. Koepfer & Söhne GmbH Type 153 A/CNC Built in 1988 Machine No. 153199 Technical data Largest Module 2 Distance workpiece tool axis max. 4- 87 mm max. workpiece diameter - without magazine 142 mm - with magazine 80 (100) mm max. milling length 150 mm max. length workpiece - without magazine 300 mm - with magazine 220 mm min. number of teeth 3 min. screw gait number 1 Main spindle through- 33 mm Hole Mounting hole for 50 mm Jig max. cutter diameter 70 mm max. cutter width - Universal milling head 63 mm - Shifting milling head 71 mm max. axial cutter shift - Universal milling head 40 mm - Shifting milling head 44 mm 35 Longitudinal feeds 0.1 -5.0 mm /WU 10 cutter speeds 210-1680 /min Control (2 axes) CNC Drive power 2.2 kW Weight approx. 2400 kg Available immediately Location ...

x-travel:1000 mmy-travel:600 mmz-travel:800 mmspindle taper: ISO:50 spindle turning speed range:20 - 4000 U/minfeeds:1 - 4000 mm/minRapid feeds x/y/z:10 m/mintotal power requirement:45 kWweight of the machine ca.:11,5 tdimensions of the machine ca.:4,9 x 5,2 x 3,0 mMachine equiped with PHILPS CNC control- tool changer for 36 tools- NC table- universal milling head- coolant device, chip conveyor

Universal tool milling machine from lid suitable for tooling, fixture making, mold making as well as training Travel: 300x160x340mm Speed:40-2000 rpm Recording: SK 40 Table 600x210mm Longitudinal path (X,Y,Z axis) 300x160x340mm Tool holder: SK 40 Vertical spindle speeds: 40-2000rpm Feeds 2-2000mm/min Connection 50 Hz 3x 380V Spindle motor 1.8KW Machine weight approx. 700kg Dimensions 1000x1600x1000mm

Article number: 07-07-235 Manufacturer: Lid Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1988 L x W x H: approx. 2300x1800x1800mm Weight: approx. 1750kg Digital display: 3 – axes – ACTIVE – digital display Heidenhain (TNC 113) Travel: X-axis: approx. 500mm Y-axis: approx. 400mm Z-axis: approx. 400mm Table clamping surface: approx. 700x400mm Spindle: Speed range: approx. 50-2500 rpm Tool holder: ISO 40 Drive power: approx. 6.0kW Tool clamping: automatic Feeds & rapid traverses: in all 3 axes Feed range: approx. 8-630mm/min Rapid traverses: approx. 3.0m/min Accessories • Vertical & horizontal milling equipment  Coolant Device New  Complete documentation  Various tension wrenches  Horizontal – Spindle Cover Cap  Safety handwheels  Central lubricatio ...

Mandelli boring machine mod Thema 1500 Year 1988, CNC ECS 2101 ran X 2800mm Y 2000mm Z 1250mm W 800mm Continuous rotary table 1250 x 1000 ISO 50 spindle, 1500 RPM Magazine 61 tools ... más información

Description: SK 40 tool holder, table 800 x 400 mm, max. 2000 rpm, spindle head travel 360 mm, table travel 430 mm transverse and 400 mm verticalApprox. Onsite Dimension. (l x w x h): 1,500 x 2,000 x 2,000 mm, weight approx.: 1,800 kg ... más información