máquinas rectificadoras usadas para la venta

workpiece diameter: 2 - 60 mmclamping range: 4 - 220 mmworkpiece length: 50 - 1.100 mmworkpiece weight: max. 120 kgAngle: 60 Gradgrinding wheel speeds: max. 45.000 U/mintotal power requirement: - kWweight of the machine ca.: 0,7 tdimensions of the machine ca.: 1,0 x 1,0 x 2,0 mDocuments: Center Grinding MachineTECHNICA - ZSM 150The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic grinding wheel feeding, automatic transverse adjustment, Table longitudinal movement hydraulically or manually, wet grinding device, electromagnetic clamping plate, Accessories Grinding length: 500 mm Grinding width: 200 mm max. workpiece height: 250 mm Speed 2800 rpm Clamping surface: 600 x 200 mm Total power requirement: 3.7 kW Machine weight approx.: 1,6 t Operating instructions with circuit diagrams Machine can be demonstrated

Diskus Segmented - grinding machine with horizontal grinding spindle , for machining steel / gus / ceramics. the machine has been fully functional for 10 years until it is decommissioned. For the technical data, please refer to the AWF charts attached in the appendix. If you have any questions or would like to make an appointment, please do not hesitate to contact us. Delivery from place. Machine for export.

Discus Werke DSH 600/1000 Side Surface Grinding Machine This type of machine is a machine with a motor-driven grinding spindle. The clamping and grinding of the workpieces is carried out with clamping devices tailored to the respective work. The devices are attached to the machine bed. The column saddle on which the motor spindle is mounted serves as a feed, dressing and pendulum slide. Manufacturer: Diskus Werke Model: DSH 600/1000 Serial number: 6299 Type: Side Surface Grinding Machine Cooling lubricant: Isocool 1020 BF Coolant volume: 400 liters Concentration: 2.5% (x factor 1.6 ≙ 4%) Year of construction: 1964 Condition: used The side surface grinding machine is located in Hildesheim and can be dismantled and picked up by the customer there. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure,  ...

Table dimensions: 2000x500mm, magnet clamping plate dimensions: 2x 1000x400mm, weight: 7t, with documentation, rectifier system hand crank dresser, wet grinding device, paper belt filter, grinding wheel and grinding wheel holder, the machine needs to be overhauled. ... más información

Grinding machine, angle grinder, turning steel grinding machine, thread drill grinding machine, milling cutter grinding machine, surface grinding machine, drill grinding machine, bench grinder-Manufacturer: Wilhelm Simon, tool grinding machine with 2 stations-Motor power: 1 kW-Speed: 2800 rpm-Grinding disks: Ø max. 150 mm-Coolant system: pump is missing, can be replaced at an additional cost-Dimensions: 1430/780 / H1380 mm-Weight: 456 kg

workpiece diameter: 200/250 mmthreading length: 500 mmthread pitch: 6 - 72 mmgrinding diameter - min.: 1 mmcentre distance: 800 mmmax. module: 8 spindle speeds: 0,19 - 32 U/mmpitch angle: 40 °relief of the tap: 0,015 - 4 mmgrinding wheel diam. min/max.: 275 / 350 total power requirement: 11 kWweight of the machine ca.: 3,6 tdimensions of the machine ca.: 3,8 x 2,3 x 1,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 2100 mmgrinding width: 600 mmworkpiece height: . mmmagnetic plate size: 2000x600 mmtotal power requirement: 55 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

rotary table diameter 1000 mm grinding height 650 mm grinding head - power demand 15/5.5 kW total power requirement 30 kW machine weight approx. 18 t workpiece diameter 1,000 mm workpiece height, approx. 500 mm Installation height under grinding spindles approx. 500 mm Ground hole Ø, approx. 50,900 mm max. Workpiece weight approx. 900 kg Distance between table opening and column 1,000 mm Table speeds, hydraulic, stepless, right/left 5 60 rpm Table/workpiece feed, 5 degrees 0.0025 0.025 mm/stroke Table stroke approx. 600 mm Distance between grinding spindle and machine body 600 mm Surface grinding head Ø (segment wheel) 450 mm Stroke of grinding strokes, max. 500 mm Grinding slide speeds, stepless 0.2 - 1 m/m max. Internal grinding spindle Ø 140/100 mm Cup wheel Ø, up to approx. 200 mm 15 kW surface grinding motor / 5 ...

Center height: 165mm, center width: 750mm, Morse taper: 4, grinding diameter small/large: 80mm/200mm, internal grinding small/large bore: 5mm/100mm, max. grinding depth: 250mm. ... más información

max. dia. of grinding wheel: 800 mmmax. width of grinding wheel: 250 mmgrinding table: swivable: Gradtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mDouble Sided Finegrinder, Dresser, Coolant Device, older M. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing diameter: 80 mmstroke: 280 mmthroat: 300 mmtotal power requirement: 6 kWweight of the machine ca.: 2,6 tHoning Ø 10 - 100 mmMax. honing depth, approx. 250 mmMax. spindle stroke 260 mmDistance between spindle and column 300 mmMounting height 1,000 mmTable size 350 x 500 mmHeight of table above floor 500 mmSpindle speeds in 2 steps, infinitely variable, approx. 85 - 300 rpm 170 - 600 rpmStroke speed, infinitely variable, hydraulic 0 - 23 m/minSpindle drive 2 kWTotal electrical load 6 kW - 380 V - 50 HzWeight 2,600 kg Accessories / Special Features Built-on 2-station tilting table which accommodates 2 workpieces. Mechanical workpiece clamping, using a manual lever. Hydraulic infeed of the tool. Switch-off via timer. Air measuring device (probably). Honing oil unit. Various splash shields, etc. Condition : Good. Machine can be inspected under ...

With documentation, has been maintained regularly, an inspection is possible. ... más información

internal diameter: 20/300 mmgrinding depth: 250 mmswing diameter: 250 mmworkpiece spindle - bore: 45 mmworkpiece spindle swivable +/-: 25 °taper setting angle of the workpiece column: 50 °work piece spindle speed: 42 - 400 U/mingrinding spindle speed: 10.000 U/mintable speed -stepless-: 0,1 - 8 m/mingrinding spindle drive: 4 kWpower capacity: 10 kWweight of the machine ca.: 4.500 kgdimensions of the machine ca.: m: : : : : Internal grinding Æ, min./max. 20 / 300 mmGrinding depth 500 mmTable stroke, min./max. 5 / 800 mm Height of centres above table 250 mmSwing Æ in the table recess 600 mmWorkspindle bore 62 / 45 mmSwivability of workpiece wheelhead 25 °Max. taper angle whic ...

stroke X: 750mm stroke Y: 530mm grinding machine magnetic trays 700/500 mm ... más información

Prior sale reserved - errors possible Internal Reference Number: D-1143-2  ... más información

grinding diameter: 400x80 mmgrinding length: 400 mmcentre height: 155 mmtotal power requirement: 5 kWweight of the machine ca.: 2300 kgdimensions of the machine ca.: 1,3x1,1,75 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

BPH 20 NA machine for sale, year 1966. GO performed in 2004 by Procházka-Moravec. Also installed Heidenhain measuring. Table clamping surface 200 x 630 mm. max. revolutions 2440/min. ... más información

2-axis digital display Travel X/Y/Z: 400/250/500 mm Optical rotary table D 300 mm + adapter plate D 400 mm Swivel rotary table D 200 mm Lots of accessories  ... más información

: 450 mm Länge x-travel: 500 mmworkpiece height: . mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información