fresadoras usadas para la venta

Spindle swivel: No; Sliding carriage: Yes; Height adjustment: handwheel; Swivel adjustment: -; Milling jaw adjustment: manual; Height indicator: Scala; Swivel angle indicator: -; Milling stop indicator: Scala; Milling spindle diameter: 40 mm; Speeds: 3000, 4500, 6000, 9000; Motor power: 5 kW; Engine Brake: Yes Automatic; Suction connection: 2 x 120mm; Machine length: 1200mm; Machine depth: 900mm; Weight: 600kg;

Manufacturer: Haffner , Type: SL 100, Year: ca.1980, Work piece width min-max mm: 550-1050, Face plate aggregate: yes, Key hole boring aggregate: yes, Clamping hight max. mm: 1050, Trench deepth max mm: 150, Trench lenght max mm: 315, Vertikal spindles: 1, Horizontal spindles: 1, Milling chain motor Kw: ca.1,0, Milling widths stop system: 315, Total power kW: 1,5, Lifting device: Pneumatisch, Year :ca.1980

Number of agregats: 1 St.range L-W-H: 1.350 x 1.200 x 1.200 mmweight: 800 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

x-travel: 1250 mmy-travel: 800 mmz-travel: 240 mmcontrol: Siemens turning speeds: 45 - 3600 U/mintotal power requirement: / kWweight of the machine ca.: 9 trequired space: / mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

- Table size (W x D): 500 x 120 mm - with clamping jaw - Size stop plate (W x H): 520 x 265 mm - Stop plate can be moved left and right - Tilt of table and stop: 45° to the left or right - Depth of the sawing unit: 175 mm - automatic lubrication of the saw chain - Diameter suction connection: 600 mm - incl. chains: 2 x 6mm; 1 x 8 mm; 2 x 10 mm; 1 x 11 mm; 2 x 12 mm; 2 x 14 mm; 2 x 16 mm - incl. swords: 1 x 6|40x150; 2 x 12-14|40x150; 2 x 16|40x150 - Weight: approx. 350 kg Engine data: - Connection voltage: 380 V - Frequency: 50 Hz - Current: 3.5 A - Power: 1.5 KW - Speed: 2,880 rpm - Control voltage: 220 V Dimensions (H x W x D): 1,800 x 600 x 900 mm Transport dimensions (H x W x D): 1,900 x 800 x 1,200 mm (without stop plate) on EURO pallet Transport dimensions fully assembled (H x W x D): 1,900 x 1,400 x 1,200 mm on EURO pallet Weight: approx. 400 kg (i ...

Manufacturer: Schneider Doppelspindelfräse, Type: SK-02, Year: 1981, Control: hand, Program: 2, Work piece width min-max mm: 3000/4000/6000/8000/10000, Min.-max. workpiece length in mm: 150, Vertikal spindle: 30, Spindle lift: no, Diameter of the spindle mm: 5,8, Spindle travel range total mm: no, Tool clamping system: inkl 2 Vorschübe, Year :1981

Manufacturer: Schneider Doppelspindelfräse, Type: SK-02, Year: 1981, Control: hand, Program: 2, Work piece width min-max mm: 3000/4000/6000/8000/10000, Min.-max. workpiece length in mm: 150, Vertikal spindle: 30, Spindle lift: no, Diameter of the spindle mm: 5,8, Spindle travel range total mm: no, Feeding speed: 1800 kg, Year :1981

Kehl machine / milling machine Schneider 3-roll feed SUVA protection L x W x H: 120 x 100 x 170 cm Weight approx. 580 kg Built in 1981 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

JAROMA DYFD-2 combined milling machine/saw Product name: Milling machine Type: DYDF-2 Manufacturer: JAROMA (Poland) Machine number: 3814 Year of construction: 1982 Condition: used, checked Technical details: - Spindle diameter: 25 mm - usable height (spindle height): 110 mm - Spindle inclination: 5° in both directions - Table dimensions: 1,120 x 750 mm - 2 x suction nozzles, diameter 100 mm - 1 x additional 380 V connection for a feed - Spindle height and inclination can be adjusted manually - removable drawer for cleaning - Machine dimensions (set-up) L x W x H): 1,120 x 830 x 1,100 mm Engine data: - Voltage: 380 V - Frequency: 50 Hz - Power: 3.8 / 3.0 kW - Speeds: 2,900 / 1445 rpm (2 speeds) Transport dimensions (L x W x H): 1,200 x 840 x 1,220 mm (on EURO pallet) - Number of packaging units: 1 - Weight: approx. 700 kg The machine has been overhauled  ...

Chain stemmer. Stülpfräe Handle / door lock cutter  ... más información

Manufacturer: Okoma, Type: SF3 SFA , Year: 1983, Control: elektronisch, Controlled lenght stopper: no, 4-fach Konterholz: 2-fach, Studioeinrichtung Winkel: yes, Nutspindel: yes, Diameter of the spindle mm: 40, Length of tenoning spindle mm: 250, Tool travel range tenoning spindle: 2, Moulding spindles: 1, 1 length of profile spindle in mm: ca.200, Spindle for fittings groove mm: yes, Diameter of the spindle mm: 40, Constant stroke mm: 68, Main engine kW: ca 7,5, Outer profiling package: yes, Horizontal spindle clocked: yes, Work piece re-charging: no, Year :1983

Flush milling machine HolzHer UF 362 with feed HolzHer 3 rolls Width max. 50 mm 2 motors 0.55 kW, 3 x 400 V, 50 Hz Year of construction 1984 Weight approx. 300 kg L x W x H: 120 x 100 x 130 cm The Fraese is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Table dimensions: 800 x 1.180 mmMotor output: 5/6 kWSpindle diameter: 30 mmreus: 3/4,5/6/9.000 U/minheight adjustment: 150 mm: Ja : Nein The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

Manufacturer: Weinig Unicontrol 6, Type: Typ 6, Year: 1985, Control: SPS, Work piece width min-max mm: 25 - 260 mm, Min.-max. workpiece length in mm: 220 + 2xZapfen.<CRLF>max. 6000 mm, Min.-max. workpiece height in mm: 30 - 100 mm, Controlled lenght stopper: no, Studioeinrichtung Winkel: yes, Crosscut saw controlled: yes, Diameter of the spindle mm: 50 mm, Moulding spindles: 3, Länge Profilspindel mm: 300 mm, 1 spindle lift in mm: 100 mm, 1Engine power kW: 11 kW, 2 spindle lift in mm: 100 mm, 2 Engine power kW: 11 kW, 3 spindle lift in mm: 100 mm, 3 Engine power kW: 11 kW, Diameter of the spindle mm: 50 mm, Feeding speed max m/min: 5,8 - 80 m/min., Feed stepless: yes, Outer profiling package: yes, Splintering controlled: no, Horizontal spindle clocked: yes, Online connection: no, Work piece re-charging: no, Exhaust diameter mm: 180 mm, Required space L x W x H mm: 6000x3000x2300  ...

Description: 3 HP head motor - 2 poles Central pump motor 1 HP - 4 poles Maximum head stroke 150 mm Maximum notch depth 130 mm Head vertical adjustment 100 mm Longitudinal table travel 400 mm Table dimensions 1000x310 mm Height of work surface 860 mm Approximate weight 700 kg Oil tank capacity 20 litres The machine is supplied with Service keys Timed pump for skid lubrication 2 Guide shoes with adjustable cleats. Machine sold without tools or accessoriesApprox. Onsite Dimension. (l x w x h): 1,000 x 1,400 x 1,600 mm, weight approx.: 700 kgs kg

- Handwheel adjustment of spindle height/angle - Spindle angle displayed via viewing window, swivel range -4 to + 45° - Right-left rotation - double-sided table extension to 2,000 mm - Engine power 5 kW - Speed 3,000 / 4,500 / 6,000 / 9,000 / 12,000 rpm (manually adjustable) - Suction nozzle Ø 2 x 120 mm - Emergency stop switch) - Power: 380 V, 50 Hz, 3~, 10.8 A - with 4-roller feeder

With milling stop, fine stop, left/right run, 4000-7000 rpm  ... más información

Table milling machine, table milling machine-Table milling machine: with rigid spindle-Feed:-Speeds: 3000, 4500, 6000, 9000 rpm-Dimensions: 1400/800/H1480 mm-Weight: 600 kg ... más información

Manufacturer: Okoma, Type: SF 6 SA, Year: 1985, Work piece width min-max mm: 40-300, Min.-max. workpiece length in mm: 30-3000, Min.-max. workpiece height in mm: 10-100, Trimming saw: yes, Diameter of saw: 380, Saw kW: ca.2,5, rotations controlled: 4500, Working hight mm: 150, Working range Z-axis mm: 600, Length lifting spindle mm: 650, Diameter of the spindle mm: ca.50, Travels of spindle: 5, rotations controlled: 4500, Working length max mm: 3000, Work piece hight max mm: 100, Main engine kW: 7,5, Clamping system: pneumatisch, Year :1985

Used milling machine Manufacturer: Zimmermann Type FZ0 (Fritzi) Built in 1986 with base cabinet with various milling cutters Total weight approx. 200 kg Location: 58730 Fröndenberg/Ruhr The machine can be viewed and tried out under electricity. We will be happy to send you more photos by e-mail. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we h ...