Fabricante:
(Categoría: 203)
Number of spindles: 6 St.Working width: 250 mmWorking height: 160 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 6 bis 24 m/min.Dimensions (L/W/H): 4800x1900x2150 mmweight of the machine ca.: 5400 kgControl: powerControl HOMAG Moldteq M-300 (OPTIMAT LPP-306)--------------------------------------Four-sided planer in window versionwith electronic axial and radial adjustment of the spindles.Advantages:--------------------------------------- Flexibility thanks to variable feed and adjustable spindle speed- Intuitive machine operation via powerTouch2- Quick setup using proLock spindle clamping- High precision thanks to solid cast iron stand- Ideal power transmission as each spindle has its own motoris drivenTechnical data short version--------------------------------------Number of spindles: 6Working width: 250 mmWorking height: 160 mmDressing table length: 2500 mmSpindle s ...
Surface planing machine Kirchner Leipzig or simply surfacer for smoothing and leveling (dressing) of wood Incl. Adjustable angle stop and extensive accessories, working width: 410 mm, knife system: Strip planer knife Z2, engine: 2,2 kW ... más información
Number of spindles: 7 St.Working width: min. 18 - 230 max. mmWorking height: min. 8 - 150 max. mmLength of the planing table: 2000 mmFeed motor: 7,5 kWFeed speed: 7-36 m/min.Kuper planer and moulder SWT 23 XLS-7------------------------------------------------------Machine still in use and can be viewedFurnishing:7 spindles each with 7.5 kW motor 40mm diameterWorking width: max. 230 mm, min. 18 mmWorking height: max. 150 mm, min. 8 mmFeed table: 2,000 mmSpindle arrangement:1. Spindle down, 6,200 rpm2. Spindle right, 6,200 rpm, axial NC controlled3. Spindle on the left, 8,000 rpm, axially and radially NC controlled4. Spindle right, 8,000 rpm5. Top spindle, 6,200 rpm, axially and radially NC controlled6. Top spindle, 8,000 rpm, axially and radially NC controlled7. Spindle down, 8,000 rpmSiemens PLC control large touch displayFeed motor 7.5 KW speed 7-36 m/minHeight adjustment electrically v ...
Number of spindles: 6 St.Working width: 250 mmWorking height: 150 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 6-24 m/min.weight: 4770 kgDimensions (L/W/H): 4722x1860x1776 mmVierseitenhobelmaschine Kuper SWT XL-6 in Fenster-Versionmit elektronischer Axial- und Radialverstellung der Spindeln.Schwerer Maschinenständer, verwindungsfrei und schwingungsarm.Anzahl der Spindeln: 6Arbeitsbreite: 250 mmArbeitshöhe: 150 mmAbrichttischlänge: 2500 mmSpindeldrehzahl: frequenzgeregelt 4.000 - 8.000 U/minVorschubgeschwindigkeit: 6-24 m/minAusführliche Beschreibung finden Sie in nebenstehender PDF-Datei!(Technische Angaben laut Hersteller - ohne Gewähr!)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
High-performance planing system Kupfermühle type K43 with inlet and outlet for planing and beveling boards and beams. Consists of: 1. Semi-automatic inlet roller conveyor, length: 10 m 2. Kupfermühle HOMS 410 planing machine 3. Outlet roller conveyor, length: 10.5 m with pneumatic ejector, Working height four-sided: 250 mm, Working height two-sided: 280 mm, Feed planer: max. 30m/min, spindles: 4 + 2 x bevel, 1. Infeed roller conveyor, length: 10 m, working width: 420 mm
max. ram stroke: 230 mmthroat: 230 mmtable diameter: 0 mmare offered :2 pieces of shaping spindle for Lorenz gear shaping machines type LS 630 to LS 12501x overhauled new1x has to be overhauled.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información
Number of spindles: 6 St.Working width: 240 mmWorking height: 200 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 6-36 m/min.SCM Superset NT PLUS Comp. 31 for window production-----------------------------------------------Technical data:-----------------------------------------------Working width: max 240 mmWorking height: max. 200 mmFeed: 6 to 36 m/min1. Spindle-----------------------------------------------First lower spindle horizontalMotor with brake 11 KWDiameter: 40mmSpeed 6,000 rpmFast tool clamping T-SET2. HSK tool holder-----------------------------------------------First right tool holder verticalMotor with brake 7.5 KWSpeed 8,300 rpmVertical and horizontal electronic positioning3. HSK tool holder-----------------------------------------------First left tool holder, verticalMotor with brake 7.5 KWSpeed 8,300 rpmVertical and horizontal electronic positioningel ...
Number of spindles: 6 St.Working width: 240 mmWorking height: 120 mmDimensions (L/W/H): 4900 x 1700 x 1700 mmweight of the machine ca.: 3500 kgControl: CNC SCM SUPERSET NTE 31 PLUS automatic profile milling machine with 6 shafts14 axis control with touch screen - WINDOW VERSIONMachine with 6 spindlesSpindle speed 8,300 rpmWorking width 240 mm, working height 120 mmElectronic horizontal and vertical positioning of the spindlesGlazing bead cuttingTouchscreen controlsDetailed technical description, seeadjacent PDF documents.Suction nozzle diameter:1. Spindle down: 120mm2nd spindle right: 120 mm3. Left spindle: 120 mm4. Spindle top: 150mm5. Spindle top: 150mm6. Spindle below: 120mmOption: workpiece return to the operatorImages are from our archive of a machine of the same model.(Technical information according to the manufacturer - without guarantee!)The data for this ad was created with Mod ...
Vema AHM-51 surface planer or Vema surface planer for smoothing and leveling (surface planing) wood. Incl. Adjustable angle stop., engine: 4 kW, working width: 500 mm, table length: 2.500 mm, dressing stop: Pivotable, Cutter block: Strip planer blade Z4 ... más información
Number of spindles: 6 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 5-30 m/min.Control: CNC The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información
High-speed planer and moulder Weinig H30 R for four-sided planing and profiling of wet wood (freshly sawn) The machine is in the queue and is being prepared for delivery after the order has been placed., working width: 250 mm, working height: 140 mm, spindles: 5, spindle 1: Bottom (7.5 kW) - counter bearing, spindle 2: Right (11kW), spindle 3: Left (11kW), spindle 4: Above (15 kW) – counter bearing, spindle 5: Below (30 kW) - toothed belt drive / counter bearing, feed: 15 kW, control: ATS system, Powered table rollers: Yes
Planing and molding machine Weinig Hydromat 30 N for four-sided planing and profiling of large (wet) wood and Beams with high feed and including planing heads for the horizontal spindles., spindles: 4, spindle 1: Bottom / 10 kW / counter bearing / jointer, spindle 2: Right / 10 kW, spindle 3: Left / 10 kW, spindle 4: Top / 10 kW / counter bearing / jointer, working width: 300 mm, working height: 200 mm, table: Solid chrome plated and air cushion, Control: ATS system
Number of spindles: 6 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 5-30 m/min.Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled------------------------------------------------------------ -----------Short summary:-------------------------------------------------------------- ---------6 spindles with 8,000 rpm5 x HSK/PowerlockAxial and radial CNC adjustment of the spindles via controlCNC - controlled adjustment and positioning of the feedDetailed description:---------------------------------------------------------- -------------Technical specifications:Working width: 20-230 mmWorking height: 8-120 mmNumber of spindles: 61. Tool holder - below------------------------------------------------Motor with brake: 5.5 kWSpindle diameter: 40mmSpeed: 6,000 rpmTool flight circle: 93 - 160 mmAxial adjustment range: 5 ...
Number of spindles: 6 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 5-30 m/min.Control: Weinig PowerCom Weinig Powermat 500 for window production---------------------------------------------Machine will be checked at our warehouseShort summary:---------------------------------------------6 Spindles with 8,000 rpm and 7.5 KW5 x HSK/PowerlockWindow package with glazing bead separationSpindles axially and radially CNC controlledright and upper spindles with common pneumatic timing forGlazing bead cuttingLarge control Powercom with touchscreenDetailed description:---------------------------------------------Tool arrangement No. 018 for window productionTechnical specifications:---------------------------------------------Working width 20 - 230 mm (at tool cutting circle 93 - 125 mm)Working height 8 - 120 mm (at tool cutting circ ...
Number of spindles: 5 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 5-30 m/min.Control: Weinig, MemoryPlus Weinig Powermat 600 with HSK/Powerlock, axial/radial CNC controlled-------------------------------------------------- Machine is being checkedShort summary:-------------------------------------------------- 5 spindles with 8,000 rpm4 x HSK/PowerlockAxial and radial CNC adjustment of the spindles via controlCNC - controlled adjustment and positioning of the feedDetailed description:-------------------------------------------------- Technical data:Working width: 20-230 mmWorking height: 10 -120 mmNumber of spindles: 51. Tool holder - bottom-----------------------------------------------Motor with brake: 5.5 kWSpindle diameter: 40mmSpeed: 6,000 rpmTool flight circle: 125 - 145 mmTool flight circle rebate cutter: 130 - 160 ...
Weinig PM 17 planing and moulding machine for four-sided planing and profiling of wood, including planing heads., spindles: 5, working width: 170 mm, working height: 120 mm, spindle 1: Below, spindle 2: Right, spindle 3: Left, spindle 4: Upstairs, spindle 5: Below, Tools: Included ... más información
Planing and moulding machine Weinig Profimat 22 N for four-sided planing and profiling of wood with long planing table and including planing heads and accessories., spindles: 5, working width: 220 mm, working height: 120 mm, spindle 1: Below, spindle 2: Right, spindle 3: Left, spindle 4: Upstairs, spindle 5: Below, Tools: Included
Planing and moulding machine Weinig Profimat 23 for four-sided planing and profiling with ATS system., spindles: 6, spindle 1: Below, spindle 2: Right, spindle 3: Left, spindle 4: Right, spindle 5: Upstairs, spindle 6: Below, working width: 230 mm, working height: 120 mm, Dressing table length: 2.000 mm, control: ATS, Control: ATS, delivery time: On demand, sample picture: Illustration similar
Planing and molding machine Weinig Profimat 23 for four-sided planing and profiling with universal spindle for pre-planed Wood or other angled (dressed) workpieces such as MDF or plastic parts. The dressing spindle can be retrofitted if required. Spindles: 5 Spindle 1: Right (5.5 kW) Spindle 2: Left (motor together with spindle 1) Spindle 3: Top (4 kW) Spindle 4: Down (4 kW) Spindle 5: Uni (4 kW) Working width: 230 mm Working height: 120 mm Dressing table length: 2,000 mm Feed: 2.2 kW // 5-24 m/min, spindles: 5, spindle 1: Right (5.5 kW), spindle 3: Above (4kW), spindle 2: Right / 7.5 kW / 40 mm, spindle 4: Bottom (4kW), spindle 5: Uni (4 kW), working width: 230 mm, working height: 120 mm, feed: 5 - 22 m/min, Dressing table length: 2.000 mm, control: ATS system, table rollers: Driven table roller in the outlet
Weinig Profimat 23 planing and moulding machine for four-sided planing and profiling with Weinig EM 11 feed magazine and including extensive accessories and a set of processing tools. The Weinig EM 11 feed magazine can be removed from the offer. Special price, including disassembly and loading from the location., spindles: 5, spindle 1: Below, spindle 2: Right, spindle 3: Left, spindle 4: Upstairs, spindle 5: Below, working width: 230 mm, working height: 160 mm, spindle diameter: 35 mm, Dressing table length: 2.000 mm